ISOFT IS-001 IS-002 HW Full Series of Chrysanthemum Engineering Cable, 1.0 Engineering line, Fast charging, Data transmission, Type-C interface Support Hongmeng/ Kirin chrysanthemum engineering line.
Features:
1. Bold pure copper wire, Each set of wires uses thickened pure copper wire, Pure copper copper core. Tinned copper core. Inner insulation., TPE protects the outer quilt, and Skin feel TPF material.
2. One-click engineering mode. Press the button to force the USB1.0 port to start the engineering mode.
3. Fast charging data transmission. It can be used as a normal data line without any operation.
4. Type-C interface. Full line length: about 100cm
5. Support HW full series/Kirin chip/Hongmeng system, suitable for Kirin810/ Kirin820/Kirin980/ Kirin985/ Kirin990.
6. Soft rubber edging. Soft and elastic, will not crack or change color for a long time, feel silky smooth, not entangled or knotted.
Function:
Support iP 5S-11 Pro Max/iPad full automatic recovery mode!
Support iP/iPod/iPad motherboard into recovery (flash)mode, solve the problem of touch failure, key fault lead to iPhone can not enter the flash mode!
Can access to iTunes, Ace, iTool, hourglass software!
Read serial number, ECID, hardware model and other information!
Test of mobile phone U2!
Appearance: White Powder Solubility: It is soluble in ester, ketone, aromatics and alcohol ethers. It is insoluble in 200# gasoline and alcohol. Characters: 1, Good adhesion and High hardness; 2, Good compatibility with CAB or NC; 3, Non yellowing and good resistance to weather; 4, Good compatibility with other resins; 5, Good adhesion with plastic substrate; Specification: TYPE NO.: AR-001 AR-002 AR-66 AR-70 AR-800 ( ALCOHOL SOLUBLE ) Solid Content (%) 100 100 100 100 100 Softening Point (�ºC) 115----130 115----128 130----150 150----160 108 Acid Value (mgKOH/g) 18----35 18----35 3----6 5----8 4.29 Tg (�ºC) 45 40 50 61 39.69 Viscosity (25�ºC mpa.S) 250--450 250--450 2000--4000 250--0450 100--200 Application: AR--001 Exterior wall coating, fire retardant coatings AR--002 Road marking paint, floor coatings AR--66 Inks, Plastic coatings, container coatings AR--70 Plastic coatings, PVC Inks AR--800 Ink, plastic coatings, environment--friendly coatings Packing: 25kgs net per bag, 12500kgs/1x20`gp with pallet. Storage: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times It can be used as an absorbent for carbon dioxide and can purify the air in submarines The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures Carbon dioxide scrubbing Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control
1. Name of commodity: Precision Hardware Spring (QL-S-001); Product Keywords: Coil spring; Flat spring; Machined spring; Extension spring; Compression spring; Torsion spring; Cantilever spring; Blance spring; Leaf spring; V-spring; Belleville spring; Constant-force spring; Gas spring; Main spring; Negator spring; Progressive rate spring; Spring washer; Wave spring. 2. Material: Spring metal, low carbon steel, ss304, ss301, 65mn, 16mn 3. Surface process: Zinc plated, powder coated, painted, polishing 4. Weight: From 5 grams to 3000 grams 5. Spring thread dimensions: Can be 3mm to 8mm. We have over 7 years of producting experience of metal spring product. They are widely used in machinery assembly, agriculture machinery fittings, holding and lifting system parts, furniture hardware and fiitings. As per customers' requirements!
Appearance: golden to brown global granule Moisture %: 46-52 Complete exchange capacity (mmol/g) í¦4.5 Total bulk exchange capacityú¿mmol/gú¬í¦1.8 Wet apparent density (g/ml): 0.77-0.87 Specific Gravity, moist (g/ml): 1.24-1.28 Grainsizeú¿0.315-1.25ú¬mm%: í¦98 Effective grain size mm: 0.4-0.7 Uniform coefficient: í_1.7 Sphere rate after abrasion %: í¦95 in 25kgs/wpp bag
Fumaric acid 25 oc water 0.7 26 oc ethanol 5.76 27 oc xylene 0.03 Specification: (fcciv, 1996) Item unit index Purity (base on c4h4o4) % 99.50~100.50 (dry basis) Heavy metal (base on pb) ppm 10 Arsenic (base on as) ppm 3 Water content % 0.5 Melting range oc 286~302 Residue on ignition % 0.1 Chroma (in 5% ethanol) # 15 Maleic acid % 0.1 25kg/bag, 21mts in one fcl without pallet; 25kg/bag, 18mts in one fcl on pallet; Other;
Casing Cutters When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss. Single blade "Bradley Style" and dual blade casing cutters are available in all industry standard sizes. Casing Cutter Assembly The casing cutter assembly is for cutting steel pipe underground. Our unique downhole hydraulic pipe cutter applies smooth constant pressure onto three knives via a piston assembly, thereby assuring clean and rapid cutting. Once the device is lowered to the desired depth where water pressure can be applied, it begins rotating. The cutting blade normally makes cuttings before water pressure reaches to 150 to 200 PSI. CDGâ??s casing cutter assembly includes AW, BW, NW and HW. Casing Cutters Functions: 1. When a string of casing is stuck in a drill hole , a portion of it can be salvaged by cutting the casing above the stuck zone with a casing cutter. The casing can be cut at any desired point in the string. 2. The cutter connects directly to the drill rods and the pressure of the circulating water against a piston forces the steel or tungsten carbide tipped cutters out against the casing. After the casing is cut the pressure is released and the cutters retract. Features: 1. Used for cutting NW casing or HRHP/H/HM rod at any point in a drill hole when the entire string can not be retrieved. 2. NW NWL HW HWL rod box connection. 3. Each knife is made of crushed tungsten carbide. 4. To make these cutters more practical, our downhole hydraulic pipe cutters are designed with fully interchangeable internal components. 5. In fact, the only difference of various casing cutter assembly is the size of heavy duty cutter body. This means there are fewer parts in need of repair and replace. Therefore, you need not to buy and stock casing cutters' components in order to run and maintain cutter with multiple sizes. Applications: 1. Upon lowering the assembly, the cutting lugs are retracted inside the body by the spring. With low rotation (25 rpm) initially, the cutting lugs are forced out using water pressure, 1 380 kpa (200 psi). A drop in pressure indicates that the cutting operation is complete. 2. AW, BW, NW, HW/HWT casing cutter all is available. 3. Used for Odex drilling system 4. Pipe casing for difficult rock formations
Fumaric acid high quality, favorable price supplied by leading fumaric acid manufacturer in china. Appearance -super fine white powder Purity (total acid)_99.87 % Water content _0.30 % Dss _0.30% Melting point - 286-302 Ash content %_0.03 Chroma (in 5% ethanol) Hazen_15 Heavy metal (base on pb)_3ppm Arsenic (base on as)_2ppm 25kg net in paper bag lined with pe bag. 18 mt/20'fcl (with pallet) or 20mt/20'fcl (without pallet). 500kg-1000kg container bags of all specifications are available.
Purity (base on c4h4o4) % 99.50~100.50 (dry basis) Heavy metal (base on pb) ppm 10 Arsenic (base on as) ppm 3 Water content % 0.5 Melting range oc 286~302 Residue on ignition % 0.1 Chroma (in 5% ethanol) # 15 Maleic acid % 0.1 25kg net in plastic woven bag lined with pe bag. 18 mt/20'fcl (with pallet) or 20mt/20'fcl (without pallet).
Supplier: 001 h2500r-2 high-speed refrigerated centrifuge