JC Dot Matrix cable for iPhone X-13 Pro Max Face ID repair. JC Dot Matrix Flex Cable is used to repair iPhone Face ID lower/higher issues. JC dot projector lattice IC chip for iPhone 13/13Pro/13 Pro Max/13 mini face ID repair. JC Dot projector flex cable used with JC Pro1000s Dot Matrix Module or JC V1S dot projector board.
JC Face ID Dot Flex Cable For iPhone X/XS/XS MAX/11/11PRO/11 Pro Max/12/12Pro/12 Pro Max/12 Mini/13/13Pro/13 Pro Max/13 mini.
JC dot matrix flex cable full set 13pcs(X-1 Pro Max):
1x JC dot matrix flex cable for iPhone X.
1x JC dot matrix flex cable for iPhone XS.
1x JC dot matrix flex cable for iPhone XS MAX.
1x JC dot matrix flex cable for iPhone XR.
1x JC dot matrix flex cable for iPhone 11.
1x JC dot matrix flex cable for iPhone 11 Pro.
1x JC dot matrix flex cable for iPhone 11 Pro Max.
1x JC dot matrix flex cable for iPhone 12/12 Pro.
1x JC dot matrix flex cable for iPhone 12 Pro Max.
1x JC dot matrix flex cable for iPhone 12 Mini.
1x JC dot matrix flex cable for iPhone 13.
1x JC dot matrix flex cable for iPhone 13 mini.
1x JC dot matrix flex cable for iPhone 13 Pro/13 Pro Max.
Tools required: JC Face lattice detection module (JC Dot Matrix Module) +JC Pro1000s, or JC V1S + V1S dot projector board.
Specific cable model: iPhone X, XS, XS MAX, XR, 11, 11 PRO, 11 PRO MAX,12, 12Pro, 12 Pro Max, 12 Mini, 13, 13Pro, 13 Pro Max, 13 mini.
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
i2C MC12 SK-BOX Dot Matrix Disassembly-free programmer with non-removal no-soldering Face ID repair flex cable for X-14 Pro Max. New i2C Face ID repair soldering-free flex cable for X-12 Pro Max. Features: 1. New i2C dot matrix repair cable repair X-12 Pro Max Face ID without soldering. 2. i2C MC12 Dot matrix activator programmer for reading, writing and activating X-12 Pro Max dot matrix cable without disassembling, it doesn't support luminescence detection. 3. i2c MC12 dot matrix free splitactivating device with one-button activation, network update, low-voltage reading, data read and write, online operation functions, ect. 4. After activating the original dot matrix flex cable by I2C MC12 box, you can use i2C I6/I6S/Face-14/V8i programmer to detect read and write data. Option: 1. i2C MC12 SK-BOX programmer. 2. i2C dot matrix Face ID no soldering repair flex cable for XR/X/XS/XS MAX/11/11 PRO/11 PRO MAX/12/12 PRO/12 MINI/12 Pro Max.
JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem. Option: 1. JC receiver FPC board for iPhone 8-13 Pro Max(works with JCID V1SE/V1S Pro only). 2. JC receiver FPC sensor flex cable for iPhone X/XS/XS MAX/XR/11/11PRO/11 Pro Max/12 Pro/12 Pro Max/12 mini/SE2/13/13 mini/13 Pro/13 Pro Max. Functions: 1. The receiver FPC controls True Tone and also acts in the Face ID process. 2. The receiver is often broken by a screen change and until now has not been replaceable. 3. The add-on board when connected to the V1SE/V1S PRO will enable the programming of a new receiver and fix missing True Tone and Face ID not available. (If your Face-ID error is move a little higher this is a different fault and different repair procedure). Feature: 1. Support to repair iPhone X-13 Pro Max face ID truetone problem caused by receiver FPC Failure, and not require original receiver FPC. 2. Receiver FPC detecting adaptor is for working on JC V1SE and V1S Pro, which support repair 8-13 Pro Max full series face lD true tone problem caused by receiver FPC failure, no require original receiver FPC. 3. JC ear speaker receiver FPC flex cable with JCID receiver test board for iPhone X-13 Pro Max, solving the problems of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. 4. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable fixes iPhone Face ID true tone problem.
Third generation I2C V8i dot matrix flex cable for Phone X to Phone 12 Pro Max,Pad Pro 3/4. Phone face ID flex cable and i2C V8i Face ID programmer. i2c V8i programmer to read and write dot matrix flex cable, and then repair the Phone Face ID higher and lower problems by replacing the flex cable. i2C V8i Programmer Dot Projector Flex Cable For Phone X / XS / XR / XS Max / 11 / 11 Pro / 11 Pro MAX /12/12P/12 PRO MAX/12 MINI/Pad Pro 34 Face ID Not Working Repair. Note: If you are using the old i2c v8 programmer, then you need to change it to i2c v8i programmer so that you can use this dot matrix cable. You can buy a new programmer, or contact us to obtain an IC to upgrade your i2C V8 programmer to i2c V8i programmer.
i2C Dot Matrix extension test cable for iPhone 12-14 Pro Max Face ID repair. i2C iPad12X dot matrix extension flex cable iPhone 12/13/14 series Face ID repair transfer cable for I2C i6S/Face-14/V8I programmer. Repair face problem is the original face problem to repair, can not transfer another motherboard face directly to the new motherboard. Repairing faces is a highly technical job that requires face IC replacement and programming. Option: 1. i2C Dot Matrix Extension Test Cable For iPhone 12/12mini/12 Pro/12 Pro Max(Connect iPad A12X). 2. i2C Dot Matrix Extension Test Cable For iPhone 13/13mini/13 Pro/13 Pro Max(Connect iPad A12X). 3. i2C Dot Matrix Extension Test Cable For iPhone 14/14 Plus/14 Pro/14 Pro Max(Connect iPad A12X). 4. i2C Dot Matrix Extension Test Cable For iPhone 14 Pro/14 Pro Max(Connect iPad A12X).
WY Dot Matrix Lattice alignment flex cable for for iPhone X /XS /XS max XR 11 11Pro/Pro Max 12/ 12Pro/ 12 Pro Max Face ID Testing Repair. WL alignment axis extension face lattice maintenance repair cable. Product Features : After the lattice repair is completed, there is no need to apply glue. The extended cable can cooperate with the fixture to test the face in advance, and then paste the glue to achieve 99% perfect alignment of the lattice. In the process of face maintenance, there is a common problem: the deformation of the fixed iron frame of lattice and infrared leads to the failure of face entry (referred to as shaft adjustment). The wire arrangement can be extended to the top of the machine to facilitate shaft adjustment. Package Includes : 1pcs x Dot Matrix Extension Cable
WY Dot Matrix Lattice alignment flex cable for for iPhone X /XS /XS max XR 11 11Pro/Pro Max 12/ 12Pro/ 12 Pro Max Face ID Testing Repair. WL alignment axis extension face lattice maintenance repair cable. Product Features : After the lattice repair is completed, there is no need to apply glue. The extended cable can cooperate with the fixture to test the face in advance, and then paste the glue to achieve 99% perfect alignment of the lattice. In the process of face maintenance, there is a common problem: the deformation of the fixed iron frame of lattice and infrared leads to the failure of face entry (referred to as shaft adjustment). The wire arrangement can be extended to the top of the machine to facilitate shaft adjustment. Package Includes : 1pcs x Dot Matrix Extension Cable
