MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production. The new-generation taper measuring instrument developed high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths. Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports. The main features 1. Easy to calibrate, stable performance, easy to operate 2. Self-supporting, self-aligning, self-balancing 3. High measurement accuracy 4. LCD data reading 5. Fast response, real-time display reading 6. Adjustment of dynamic intelligent system 7. Lithium battery power supply, suitable for on-site use of mobile operations 8. The continuous measurement time is more than 36 hours 9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement 10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement 11. Applicable to various arc, parabolic and straight molds The performance and index 1. Measuring range: 3 3 (measurement length can be customized according to users needs) 2. Measurement accuracy: 0.01mm 3. Temperature range: -25 85 4. Linearity deviation: -0.03mm 0.03 mm 5. The longest usage time after fully charged: 36 hours 6. The longest storage time after fully charged: 2 months The main components 1. Measuring instrument: central measurement and control unit, measuring sensor 2. Measuring stand 3. Standard table: standard surface, support frame, spirit level
Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product . The calibrator can measure the temperature detected by two thermocouples. We fully consider the customer's needs. In order to be used conveniently, our calibrator pursues accuracy, stability, durability and beauty in research and development and design. At the same time, it is also committed to the characteristics of small size, flexibility, simple operation, and long standby time. Working principle The LGK-JS02-064 handheld thermocouple calibrator reads the temperature data of the thermocouple sensor at a single point through a special chip, and then displays it on the screen through a nixie light. Front view of LGK-JS02-064 handheld thermocouple calibrator Figure 4.1.1 Front view of thermocouple calibrator The above picture shows the front view of the LGK-JS02-064 handheld thermocouple calibrator. As can be seen from the above figure, the instrument has one switch button, two operation buttons, one interface to be calibrated and LCD display. Technical parameters Test temperature range: 0-1000 Operating temperature: 0 C-50 C Common working section 25 C-800 C Power supply: 2 AA dry batteries
1. Built-in static electricity elimination device, it can blow the particulate pollutant when eliminiate the static electricty. 2. ABS plastic casing, ergonomic handle, lightweight design to improve efficiency. 3. Automatic ion balance system, decay time less than 1 second, ion balance less than 15 V ( The distance is 15CM, the pressure 0.5 Mpa ) 4. Built-in miniature transformer, no need of external high voltage wiring safety design, no electromagnetic interference, no danger of electric shock. 5. The emitter needle can be replaced, and it can prolong the using life of the whole machine, optional throttle valve, control air flow. 6. A variety of connectors can be selected to meet the requirements of a variety of occasions. 7. It meets the safety standard requirements of CE FCC.
1. The grounding system is the most common and effective way to ensure the ESD safety of a process. Equipment Ground Monitor 001-9035SC is a comprehendive real time groud monitor that check the connection of equipment to grounds. It provides independent ground monitoring of up to four tools. It solved the problem of the damage which caused by the ground wire corroded, loose etc. And also saved the time and labor costs for regular inspections of ground connection. 2. Equipment Ground Monitor can continuously monitor the grounding status of equipment, ESD grounding system and resistance of equipment casing. 3. It provides independent ground monitoring of up to four tools. 4. 24 hours real-time monitor 5. Audible Alarm will enable when the resistance is over the limited resistance, and the audible alarm also could be disabled. 6. Specific limits of resistance can be set according to customer requirements to accurately control the grounding system. If no requirements are specified, default ground impedance is set at the factory. 7. The monitoring resistance group can be set in the range of 0 - 25 , accuracy 1% 8. Optional monitoring software platform to realize remote monitoring and data processing. 9. Wireless transmission or RS485 communication mode, suitable for different working conditions. 10. With alarm indicator, which can add external red and green LED alarm indicator. 11. Built-in LCD display which can display the resistance of setting value, testing value and monitoring status.
1. Monitor the real time connection and disconnection of ESD table mat to ground. 2. Monitor the real time connection and disconnection of wrist strap to ground, under the guarantee of double to ground, the path integrity of ESD to ground is more ensured. 3. Monitor has the fool-proofing function, red LED will flash and comes with audible alarm after power monitor on, plug wrist strap and connect proper ground, green LED will illuminate. 4. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 5. Monitor will alarm when wrist strap is in open circuit or poor contact 6. Monitor 1 single wrist strap and 1 table mat simultaneously 7. Accuracy: + / - 10% 8. When monitor alarm, red LED light flashes and also comes with buzzer sounds 9. Suitable for any kind of single wrist strap 10. Beautiful appearance, strong anti-interference ability
1. Real time monitor single wrist strap grounding function 2. Monitor has OFF function, dial switch to ON, red light illuminate and monitor will turn green while connect wrist strap 3. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 4. Monitor will alarm when wrist strap is in open circuit or poor contact. 5. Monitor will alarm when grounding cord is in open circuit accidentally 6. Monitor 1 single wrist strap and itself grounding cord 7. Wrist strap alarm limit: 1.2 M ( factory preset ) 8. Accuracy: 10% 9. When monitor alarm, red LED light flashes and also comes with buzzer sounds. 10. Suitable for any kind of single wrist strap 11. Beautiful appearance, strong anti-interference ability
001-0385 surface resistivity meter is designed according to ANSI / ESD S20.20, IEC61340-5-1, JESD 625-B, CECC AST & UL test rules. It is used to measure all conductive, anti-static and dissipative material s resistivity and ground resistance. This meter uses ASTM D-257 parallel bar induction method, and automatically calibrates the range through high speed op-amp. It is easy to use and has high reliability. Applications include engineering, maintenance, quality control, incoming inspection, manufacturing and training.
1. 001-9802 surface resistance / resistivity meter is designed according to ANSI / ESD S20.20, IEC61340-5-1, JESD 625-B, CECC, ASTM & UL test rules. It is used to measure all conductive, anti-static and dissipative material s resistivity and ground resistance. It is easy to use and has high reliability. Applications include engineering, maintenance, quality control, incoming inspection, manufacturing and training. 2. Measuring resistance: 10e3 -10e12 3. Surface resistivity: 10e3 -10e12 4. Measuring temperature range: 32 F-100nF ( 0C-37.8 C ) 5. Measuring humidity range: 10% -90% RH ( above 65% RH will affect the instrument measuring accuracy ) 6. Display mode: LCD display 7. Two-stage test voltage: 10V ( the measured resistance is less than 10e6 ) / 100V ( the measured resistance is 10e6 ) 8. AC adapter: input voltage -120V/AC or 220V/AC, output voltage -9V/DC 9. Power supply: DC or battery power supply, both are common used in US and overseas countries ( Note: External power supply and battery power supply cannot be used at the same time ) 10. 2.27 kg0.06 kg ( 5 lbs 2 ounces ) cylindrical electrodes with two conductive contact surfaces with a diameter of 63.5 mm 25 mm ( 2.5 inches 1 inches ). 11. The Shore A ( IRHD) hardness of the conductive material of each electrode is between 50 and 70 12. Dimension: 191mmx102mmx39mm 13. Automatic power-off function to extend battery using life. 14. The function of automatic return to zero which is convenient for continuous and quick testing.
Interface Probe Test Pin IFP-001 Used for Transmitting Electrical Signals Interface probes are functional probes. They are not used for tests and only play a role in connection or control in switching functions, etc. Interface probes are used for transmitting electrical signals from one end to the other end in test fixtures. Interface probes manufactured by mainly include the models 001, 002, 003, 004, 005, 006 and 007 in IFP series. This product, IFP-001, is made from phosphor bronze or brass, plated with gold. Characterized by excellent conductivity, it is usually used for the connection of electronic components and functional tests. IFP-001 interface probe is 14.22 mm in total length. If customers wish to change its length or diameter, we could do as required. This probe is unique in shape. It is straight whereas others, for example 002, 003, 004, 005, 006, 007, have an extra base at the end. If the gold plating is expected to be thicken or thinned, we could try to do according to requirements. Customization is welcome. Company Information was founded in 1980. Â Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Product introduction The multi-functional single-column electronic tensile testing machine GBH-2 is a mechanical property testing machine developed and manufactured by GBPI R&D team based on GB, JIS, ASTM, DIN and other standard requirements and market demands. The instrument uses high-precision sensors, and the force measurement accuracy is within ±0.5 %FS; high-precision ball screws are used for loading, stable loading, and long life of the testing machine; professional software support, fully automatic operation, equipped with color touch screen, real-time display of test curves Data and test reports can be queried, and the test is convenient and fast; the control measurement unit can be built-in or external, with perfect limit protection, overload protection, emergency stop and other safety protection functions. It is suitable for tensile, peeling, heat sealing, tearing, puncturing, compression, bending, shearing and other tests of various metal and non-metallic materials, and then calculates parameters such as breaking strength and elastic modulus of materials, and can also be used in the medical industry It is an indispensable testing equipment for physical property testing, teaching research, quality control, etc. Standards ASTM D828 ASTM E4 ASTM D882 ASTM D1938 ASTM D3330 ASTM F88 ASTM F90 ISO 37 JIS P 8113 QB/T 2358 etc.
In-circuit Test Probe Pogo Pin PE50 for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
Double-ended Pogo Pin Test Probe SCPA100 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCPA100 Â we will introduce is 1 Â mm in barrel diameter. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Â Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production.
Circular Saw Blades Cold Saw Blade Hot Saw Blade TCT Circular Saw Blade HSS Circular Saw Blade Segmental Saw Blade Band Saw Blade Carbide Tipped Band Saw Bimetal Band Saw Shear Blades Shear Knives Peeling Knives
Semiconductor Test Probe Pogo Pin SCPB038 for IC Inspection Semiconductor test probes are usually called double-ended pogo pins. Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. This product SCFB038 we will introduce is 0.38 mm in barrel diameter and 6 mm in total length. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. The barrel of this double-ended pogo pin is made from phosphor bronze plated with gold The bottom plunger is made from beryllium copper plated with nickel and gold. The same is with the top plunger. The inner spring is made from music wire plated with gold and nickel. This probe pin could withstand the current up to 1.5 amps. The typical maximal contact resistance is about 100 milliohms. The plunger can be pressed at a distance of up to 1 mm. But it is better to be pressed at a distance of 0.6 mm at most in working environments. Otherwise, the spring will probably be damaged severely under constant pressure. When the plunger is pressed at a distance of 0.6 mm, the loaded force is about 25 gf, which fluctuates to a tolerance. For details, please check parameters in below table. Materials (plated) Barrel: Ph, Au on Ni Plated Bottom Plunger: BeCu, Au on Ni Plated Top Plunger: BeCu, Au on Ni Plated Spring: SWP-A/B, Au on Ni Plated Electronic Specification: Current Rating: 1.5 amps Contact Resistance: 100 milliohms max Bandwidth: 5.3 GHz at -1dB Propagation Delay: 27 ps Inductance: 1MHZ at -0.02809 uH Captance: 1MHZ at 0.876347 uF Specifications: Full Stroke: 1 mm Rated Stroke: 0.6 mm Spring Force: 25 7 gf at load 0.6 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
hand shoe tacks used in making furniture, shoes and for farstening things
Battery Contact Pin Test Probe BIP80 Series for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP80 series of battery contact probes. The outside diameter is usually 0.8 mm and total length is 11 mm. There are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 1 mm Rated Stroke: 0.9 mm Spring Force: 60 gf (2.4 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu, Gold Plated
The Measuring Development Plan (2013- 2020) issued by State Council points out that Food safety, clinical laboratory, biological, environmental protection, material science become the focus of research and development of reference materials. Now, the reference materials of gas permeability, water vapor permeability and oxygen permeability produced by GBPI win the affirmation of Grade Secondary Reference Materials. GBPI becomes the first development organization of the reference materials of film permeability. These reference materials are mainly applied to the calibration and inspection of the gas permeability, water vapor permeability and oxygen permeability of packaging of food and drug. Reference Materials plays a very important role in packaging testing. Definition A substance or material that has been determined to have a sufficiently uniform property value, as a "measuring device" in the analytical measurement industry. Function v Calibrate, adjust and identify instrument and devices. v Product quality control during the production v Examine operation level the analyst v Test characteristic value of substance or material Types of Reference Materials Reference Materials of Gas Permeability: 125 m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130541] 300 m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130542] Reference Materials of Water Vapor Permeability: 125 m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130543] 300 m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130544] Reference Materials of Oxygen Permeability: 25 m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130497] 125 m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130498] Reference Value of Reference Materials Type of polyester film (PET) reference materials Transmission Rate Reference Value Specification OTR PET reference materials (62.8 ±2.9)cm3/(m2 ·24h) 25 m OTR PET reference materials (12.3 ±0.9)cm3/ (m2 ·24h) 125 m GTR PET reference materials (11.2 ±2.1)cm3/(m2 ·24h · 0.1MPa) 125 m GTR PET reference materials (4.7 ±1.2)cm3/(m2 ·24h ·0.1MPa) 300 m WVTR PET reference materials (4.4 ± 0.8)g/ (m2 ·24h) 125 m WVTR PET reference materials (1.8 ± 0.3)g/ (m2 ·24h) 300 m
Reference material for GTR tester for calibration The Measuring Development Plan (2013- 2020) issued by State Council points out that Food safety, clinical laboratory, biological, environmental protection, material science become the focus of research and development of reference materials. Now, the reference materials of gas permeability, water vapor permeability and oxygen permeability produced by GBPI win the affirmation of Grade Secondary Reference Materials. GBPI becomes the first development organization of the reference materials of film permeability. These reference materials are mainly applied to the calibration and inspection of the gas permeability, water vapor permeability and oxygen permeability of packaging of food and drug. Reference Materials plays a very important role in packaging testing. Definition A substance or material that has been determined to have a sufficiently uniform property value, as a "measuring device" in the analytical measurement industry. Function v Calibrate, adjust and identify instrument and devices. v Product quality control during the production v Examine operation level the analyst v Test characteristic value of substance or material Types of Reference Materials Reference Materials of Gas Permeability: 125 m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130541] 300 m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130542] Reference Materials of Water Vapor Permeability: 125 m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130543] 300 m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130544] Reference Materials of Oxygen Permeability: 25 m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130497] 125 m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130498]
For a long time, there is a blank in the reference materials for packaging testing instruments in the industry. The Measuring Development Plan (2013- 2020) issued by State Council points out that Food safety, clinical laboratory, biological, environmental protection, material science become the focus of research and development of reference materials. Now, the reference materials of gas permeability, water vapor permeability and oxygen permeability produced by GBPI win the affirmation of Grade Secondary Reference Materials. GBPI becomes the first development organization of the reference materials of film permeability. These reference materials are mainly applied to the calibration and inspection of the gas permeability, water vapor permeability and oxygen permeability of packaging of food and drug. Reference Materials plays a very important role in packaging testing. Definition A substance or material that has been determined to have a sufficiently uniform property value, as a "measuring device" in the analytical measurement industry. Function v Calibrate, adjust and identify instrument and devices. v Product quality control during the production v Examine operation level the analyst v Test characteristic value of substance or material Types of Reference Materials Reference Materials of Gas Permeability: 125�¼m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130541] 300�¼m Polyester Film Certified Reference Material of Gas Permeability [Certificate Number: GBW(E)130542] Reference Materials of Water Vapor Permeability: 125m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130543] 300�¼m Polyester Film Certified Reference Material of Water Vapor Permeability [Certificate Number: GBW(E)130544] Reference Materials of Oxygen Permeability: 25m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130497] 125�¼m Polyester Film Certified Reference Material of Oxygen Permeability [Certificate Number: GBW(E)130498]
1. Testing the system resistance of single / dual wire wrist strap and ESD footwear. 2. With LCD / LED display and alarm. 3. Testing resistance can be displayed on LCD screen. 4. Testing range: 10K-100M. 5. Dual footplate, can individually test two shoes simultaneously. 6. Finish the test of wrist strap and ESD shoes in 2 seconds. 7. Touch testing button could be used long time, no worries on the testing button fault. 8. Installation could be wall mounted and fixed table installation. 9. Switching signal can be workable to realize tripod turnstile and electromagnetic lock linking under the situation of testing OK. 10. Testing voltage is 28VDC, the maximum current is 0.0025mA, at the time of improving test accuracy and guarantee operator s safety.