PR200 motor protection relay is an all-in-one solution designed to continuously monitor 3-phase power lines for abnormal conditions. It can use with motors less than 690V/820A. Packed inside a small and economic package you will find a solution designed to save you time and money.
PR 240 is an excellent choice for telemetry applications for Motor monitoring, metering, and control. Its small size, low cost and remote HMI options make the relay a perfect option for power distribution systems for such uses as end-of-line monitoring and power metering.
It offers low-voltage motor protection in virtually all applications, including pumping, air-based, chiller, and bulk-material applications. It can be configured as full range of medium-voltage, three-phase induction and synchronous motors protect relay.
PR 260 is modular design motor managerment device, accommodate more I/O modules. Flexible arrangement of motor control modes and state sensing. monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. with integrated protection, motor control, metering, and data-logging functions.
This system is typically used to provide protection for three-phase low- and mediumvoltage, mediumto high-horsepower induction motors.
PDG-1000 provide continuously monitors of partial discharge (PD) in equipment such as transformers, cables in switchgear and rotating machines etc.
It analyzes RF emissions in the HF, VHF and lower UHF ranges by sensors outside the cabinet. HMI unit provides site display of TEV amplitude, ultrasonic amplitude, DO port can drive local alarms, Multi-level alarm notice site engineer. PDG-1000 also can communicate data and notifications across standard RS485 modbus interface to networked supervisory systems.
Rugged, compact design sensor detect TEV and audible ultrasonic.
Non-intrusive and wall-mounted unit design, magnetic adsorption easy installation.
Panel mount HMI unit provide automatic PD data acquisition and analysis.
HMI support max 96pcs sensor, optional wireless and wired(RS485) connection.
Multiple configurable alarms, provide 2*DO NC & NO contact for external alarm trig.
RS 485 MODBUS-RTU easy integration into existing SCADA systems.
Blue Jay RCM-IV is a combined monitoring device for earthed power supply systems (TNC-STN-S and TT) residual current. It provide max 16 monitor channels, panel mounting design suit for any electrical cabinet. LED screen display various parameters, easy for site engineer diagnosis and Insulation test.
It can optionally be carried out by selected current transformer or temperature sensor for each channel detect parameter and alarm or trip threshold. Multiple RCM-IV can combination with circuit breaker for build MRCD applications, RS485 port can easy submit data to SCADA systems.
14880 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
we supply isopentane, purified for LLDPE process use.
our isopentane is purified and , water content max 10 ppm, total sulfur max 1 ppm, No chloride. suitable for LLDPE UNIPOL process use.
Packing is 25,000 L ( net 13,600kg ) T11 ISO tank container.
we can supply long term base stable supply to worldwide LLDPE plant
Slitting Knife For Corrugated Board Used in Corrugated Carton Making Machine used for corrugated carton slitter scorer machine, cardboard slotting machine,carton printing machine etc.
They can be made by tungsten carbide with long life working time. We have all standard size and also can customized as customers' requirements.
Holes Available for machine Item Common
Capable of sensitivity 10Mv, TY-SPACE High Accuracy Star Tracker (HST-A1) deliver the best performance by ultra-high-precision attitude determination, precision (0.3]), compact size, highly reliable. FOV 5.5 designed, HST-A1 is used in the mission of detecting space debris.
The digital display rail thermometer adopts PT100 linear temperature sensing, the probe adopts copper embedded integrated technology, has the function of waterproof and pressure-proof and earthquake-proof, and the product is designed with a railway track digital display thermometer.
Designed for indoors application.
Visible laser spot reduce the load of operators.
Shortcut keys make measurement fast and easier.
Innovative design let it be able to put into pocket.
Multi-functions make it have perfect experance.
Illumination display let measuring readings legibly.
12-month gurantee
Technical Parameters
Measuring range: 0.05 ~ 50/70/100 m
Measuring accuracy: +/-2 mm
Measuring frequency: 0.1 ~ 4s
Measuring unit: m, ft, in, 00'00"
Laser type: 640-660nm,
Measuring Range: 0.05-60m
Measuring accuracy: +/-2mm
Laser Class: 2, 5000
Dimension: 113 x 44 x 25mm
Weight without battery: about 77g
History Memory: 50 groups
Measuring reference: 2
Measuring Unit: m, ft, in, 00'00"
Other functions: Distance, Area, Volume, Continuous Measurement (Max/min. measurement), Indirect measurement (3), Angel Measurement, Switch-off within 3 min.
They can be used as replacement grapples to worn out grapples off log loaders, used on the end of excavator booms, backhoes, and more. Three sizes available 42, 51, and 70³. All by-pass grapples that can close within inches. They feature extra bracing and aggressive teeth, great for handling logs and debris.
Grapples Models:
GR1100 (42â?³)â??
GR1300 (51â?³)
GR1800 (70â?³)
Rotator Models:
R30 (for G1100 and G1300)
R45 (for G1800)
The Terra Gold MULTI-P1 is an advanced electronic device that helps an operator in the classical (physical) and the electronic dowsing.
The signal of the device leaks the dowsing instruments used by the operator making the detection more sensitive and more precise. Depending on how sensitive a person is in radiaesthesis, he can capture from subtle to strong signals with the dowsing instrument used. The device supports the operator's ability so that he receives these signals louder, immediately and clearly.
It can help beginners or advanced dowsers to detect objects at a greater distance and depth.
If the dowsing / radiosensorily rod or L rods or pendulum, etc. used in electronic dowsing, but it don't connected with its electronic device, it can be connected to the Multi-Px. They can conected by adapters.
The device is compatible with all dowsing instruments and uses adapters for connection with them or with the operator. It is 100% compatible with all series of Terra Gold.
Compact robust design, small in size, easily transportable and lightweight.
The Terra Gold Multi-P1 is build featuring the latest microprocessor and component technology with low power consumption for extended use on the search field. It's probably, the most effective and easy to use long range device for electronic dowsing on the market today.
The On/Off switch, that turns on and shuts off the detector, has also corresponding led indicators thus providing protection against potential accidental wrong selection.
It is designed and build in the European Union.
We provide full service and support
Compact design
Tactile keys: with corresponding led indicators
Batt. test: voltage with led indicator, 3 positions
Microprocessor
Relative humidity: 95% maximum
Operating Temperature: -10�° to 50�° C / 14�° to 122�° F
Battery: 1 x 9V alkaline
Operation: 12-16 hours with 9V alkaline
Parts: Main unit, cables
Main unit: 12 x 34 x 28 cm / 4,72 x 13,39 x 11 in
Weight without battery: 100 grams / 3,53 oz
Instructions: English, Greek
Warranty: 24 months
Terra Gold LR 10 is an innovative long range detector for electronic dowsing, incorporating a preset for gold search. Gold has its own specific molecular frequencies. LR 10 provides these frequency, to make the desired target detectable.
Desired distance and depth of search can be adjusted by the sensitivity key. Depending on the volume of the target and the ability of the operator, it can reach up to 2.500 meters in radious and 6 meters of depth.
The Terra Gold LR 10 is easy to use. Various selections are made from tactile keys, lighting up the corresponding red led indicators next to them.
It is the smallest model in the LRx series.
Battery condition is easily inspected by led indicators on demand.
LR 10 is assembled within 10 seconds and consists of three parts:
The main unit.
The two removable BNC antennas Tr / Rx and
A removable handle.
Compact robust design, small in size and easily transportable. Its lightweight does not tire the hand of the operator even after long hours of use.
The Terra Gold LR 10 is build featuring the latest microprocessor and component technology with low power consumption for extended use on the search field. It's probably, the most effective and easy to use long range detector for electronic dowsing on the market today.
The On/Off switch, that turns on and shuts off the detector, has also corresponding led indicators thus providing protection against potential accidental wrong selection.
It is designed and build in the European Union.
We provide full service and support.
14880 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
