Blue Jay RCM-IV is a combined monitoring device for earthed power supply systems (TNC-STN-S and TT) residual current. It provide max 16 monitor channels, panel mounting design suit for any electrical cabinet. LED screen display various parameters, easy for site engineer diagnosis and Insulation test.
It can optionally be carried out by selected current transformer or temperature sensor for each channel detect parameter and alarm or trip threshold. Multiple RCM-IV can combination with circuit breaker for build MRCD applications, RS485 port can easy submit data to SCADA systems.
ZJB-101 online monitoring system consists with battery cell acquisition module and monitoring host device. It provide real-time string voltage, charge / discharge status detect, export current, cell current & voltage, internal resistance etc. It also provide automatic balance function of battery cell, to keep the voltage at a reasonable float charging range, prolong the service life of the battery. Comm port allow build remote monitor system, provide reliable and effective management method for the battery bank management, reduce risk of power interruption caused by power failure.
ZJB-DT is highly intelligent battery charge and discharge tester. It can be used as the discharge load in the battery off-line state, and realize the constant discharge of the set value by continuously regulating the discharge current. the tester records all valuable and continuous real-time data during the process. Friendly HMI provide a variety of configuration and data review, user can download record data to USB. PC host operation software can generate the curves and reports needed. Intelligent SCM ARM control, 7-inch 1024*600 LCD display. �· Discharge load use PTC ceramic resistor, avoid red heat for a safer discharge process. �· Remote battery data collector use wireless, multiple band design for 4 device working in one site. �· Each device support max 25 cell collection boxes, each box connect 12 batteries, total 300 battery cell detecting. User free to configuration charge/discharge termination threshold. Provide software export record & curve report for further analysis. Various alarm function, provide automatic protection in over-temperature/voltage/current status. With RS485 port for remote control
DCG series DC insulation monitor is based onRS485 Modbus protocol, suitable for EV DCcharging system, photovoltaic system, energystorage system, DC power grid and other DCsystems under 1000V. This device has the function of insulationmonitoring start and stop, insulationmonitoring can be real-time monitoring ofpositive and negative poles to the groundinsulation resistance, the monitoring result isnota affected by DC voltage changing, is notaffected by the positive and negative polesinsulation resistance symmetry. Model DCG-UBC1 DCG-UBCH2 Detect channels Single channel Dual channels DC voltage range 0~1000V Power supply 9~30VDC Insulation resistance range 1K ~10M Insulation monitoring accuracy 3K +10%(100-300V) 3K +5% (300-1000V) Measurement accuracy 2V+0.3% Storage temperature -40 C ~ 125 C Operating temperature & humidity -40 C ~ 70 C, 85% Off-line pressure test
ZJS-102 Insulation monitoring system is a highaccurate and secure online monitoringequipment for DC system insulation. It isdesigned for the measurement of differenttypes of ground fault, insulation decreasing,AC signal interruption, DC signal interruptionand so on. Monitor detect DC leakage current, mixed withbalanced & unbalanced bridge detectionmode, can display leakage current of each subexport loops. It integrates voltage transientcapture and current synchronous detection,records voltage and current fault curves toachieve instantaneous grounding monitoringand line selection alarm functions.
High humidity environment is a big impact factor of power transmission and transformation equipment, it will bring discharge, flashover will eventually cause the switch to trip, even burning down equipment caused a large-scale blackout. Switchgear, electrical cabinet, exchange control cabinets, outdoor terminal boxes, Due to the compact internal equipment installation, wet and condensation will be more serious consequences. At present, most user choose heating, ventilation and other method to prevent condensation. but in some well sealed cabinet and high temperature environment, traditional heating and exhaust air method is hard to work well. Blue Jay company developed DH series using semiconductor technology, in a certain place to lead controlled condensation, make the cabinet interior humidity fall to safe value. It designed ultra-small install size, high efficiency energy-saving, do not need extra heater and fan wiring. And comes with the data acquisition module for remote monitoring, It's an efficient and reliable device to replace the old thermostat and heater / fan combination.
HVD high voltage indicator is adapted for indoor electrical panel, used in MV / HV switchgear. It is connected via internal wiring to capacitive sensors inside the switchgear. Rated voltage 3~40.5kv, operation frequency 50Hz network to display the electrifying situation of the high voltage loop where the device is mounted. This integrated voltage detecting system is used for continuous operation. The condition "voltage present" is displayed by three LED indicator.
STM wireless temperature monitor can help medium-low voltage switchgear operators and maintenance engineers, to reduce safety risks from sudden temperature increases in switchgear components. It provide 7*24 hours switchgear monitor for critical busbar joints. Multiple styles of remote sensors node can deal with different electrical contacts, W3000 support max 32 monitoring node for single switchgear. Panel mount HMI unit have acousto-optic alarm and DO port, user can free to build various automatic alarm / control system. Equipped RM485 port can connect existing SCADA system for remote sensering control. It can protects your electrical assets from costly outages; while increasing safety via remotely monitoring equipment. This also increases asset integrity, and minimizes downtime.
PR200 motor protection relay is an all-in-one solution designed to continuously monitor 3-phase power lines for abnormal conditions. It can use with motors less than 690V/820A. Packed inside a small and economic package you will find a solution designed to save you time and money.
PR 240 is an excellent choice for telemetry applications for Motor monitoring, metering, and control. Its small size, low cost and remote HMI options make the relay a perfect option for power distribution systems for such uses as end-of-line monitoring and power metering. It offers low-voltage motor protection in virtually all applications, including pumping, air-based, chiller, and bulk-material applications. It can be configured as full range of medium-voltage, three-phase induction and synchronous motors protect relay.