ASTM B348 Plywood boxes
1) Size: 0.2mm diameter(min. ) 2) Grades: Gr1, Gr2, Gr3, Gr4, Gr5, Gr9, Gr12, Gr23, Ti-Ni. 3) Standard: ASTM B863 Titanium Plate (Titanium Sheet) 1) Type: Hot and cold rolled 2) Grades: Gr1, Gr2, Gr3, Gr4, Gr7, Gr9, Gr12 3) Thickness: 0.5-5mm(cold rolled); Thickness: 5-40mm(hot rolled) 4) Width: Max 1, 000mm(cold rolled); Width: Max 3, 000mm(hot rolled) 5) Length: Max 2, 400mm(cold rolled); Length: Max 6, 000mm(hot rolled) 6) Standard: ASTM B265 7) Application: Industrial and medical titanium sheet, medical titanium plate
Specifications: 1) Bolt sizes: M4-M22*Length 2) Nut sizes: M4-M22 3) Washer sizes: M4-M22 4) Standard: DIN, ASTM, BS 5) Grade: Gr1, Gr2 Gr3, Gr5, Gr7, Gr9, Gr23,
Titanium disk
Titanium flange
Titanium wire ASTM B348 ASTM B265
Titanium Alloy Bolts, Titanium Sheets, Titanium Tubes, Titanium Wire, Titanium Alloy Fasteners, Titanium Bar, Titanium Stamping Products, Titanium Forging.
Titanium plates, tubes, bar, wires, nickel plates, tubes, bar, wires.
Titanium products, such as titanium plate, bar, wire, tube, disc, block, flange, bolt.
Titanium bar, rod, titanium sheet, plate, titanium tube, pipe, titanium pipe fittings, titanium flange, titanium screws.
Titanium plate, bar, pipe, anode, forging, wire.
Titanium products such as titanium bar, sheet, forging, tube, wire.
Platinized titanium felt is a specialist material frequently utilized as a flow field or diffuser material in electrolyzer stacks and single cells, particularly on the oxygen (anode) side. This material is made by depositing a thin layer of platinum onto flattened titanium fibers that have been compressed and annealed to create a smooth, flat surface suitable for use in electrolyzers. Platinum coating thickness: 0.5 micron or customized Substrate: titanium fiber felt Felt thickness: 0.2-5.0mm Porosity: 60%-80% Fiber diameter: 10~100 microns Features High electrocatalytic activity: Platinum is known for its high electrocatalytic activity, particularly for the oxygen reduction reaction. When deposited on a titanium felt substrate, platinum forms a highly porous material with a large surface area, providing ample space for electrochemical reactions to occur. High durability: Platinized titanium felt is highly resistant to corrosion and can withstand harsh operating conditions, making it ideal for use in a variety of industrial and scientific applications. Applications Platinized titanium felt is used as an anode material in the production of chlorine and caustic soda in the The platinum coating on the titanium substrate prevents the formation of a passivating oxide layer on the anode surface, ensuring high electrochemical performance and durability. Electrowinning: Platinized titanium felt is used as an electrode material in the electrowinning of metals such as copper, zinc, and lead. The platinum coating on the titanium substrate provides excellent electrical conductivity and corrosion resistance, making it an ideal electrode material. Electrosynthesis: Platinized titanium felt is used as a catalyst support in electrosynthesis reactions, such as the production of organic compounds and fine chemicals. The platinum coating on the titanium substrate enhances the catalytic activity of the supported catalyst, leading to higher yields and selectivity. Electrolytic capacitors: Platinized titanium felt is used as an electrode material in high-performance electrolytic capacitors. The platinum coating on the titanium substrate provides excellent electrical conductivity and corrosion resistance, ensuring high performance and long-term reliability. Water treatment: Platinized titanium felt is used as an electrode material in electrochemical water treatment systems, such as electrocoagulation and electrooxidation. The platinum coating on the titanium substrate enhances the electrochemical performance of the electrode, leading to effective water treatment and disinfection.
Sintered Titanium Frit well suited for use in Electrolyzers. These frits have a smooth, porous surface (80 micron filter rating) that gives good support for membranes. A much finer surface than our Expanded Titanium Mesh, this product is recommended to be placed against the membrane when designing higher pressure electrolyzers ( 20 psi). Custom sizes are available upon request. Titanium Foam Frit Specifications: Raw Material: Titanium Filter Rating: 80 Micron Thickness: 1.5 mm Working Temperature: 300 C Membrane Filtration Corrosion resistance Why not use a Carbon based Gas Diffusion Layer in an Electrolyzer Carbon based GDL materials will be consumed and converted into CO2 gas in the presence of the Oxygen ions and Voltage found on the Anode (Oxygen) side of the electrolyzer. This secondary reaction of oxidizing the Carbon in the GDL will give temporarily lower electrolysis voltage, but this is a short lived phenomenon. The carbon GDL is quickly consumed, resulting in poor compression in the stack, and thus high resistance and lower performance. You can still used carbon cloth or carbon paper material on the Hydrogen side (cathode) since there is oxygen on that side that will oxidize the GDL material.
Customized titanium fiber felt for fuel cell is a high-performance material made through a process of sintering titanium fibers. The result is a porous and lightweight material that is exceptionally strong and corrosion-resistant. The material is commonly used in industries such as aerospace, chemical processing, and medical equipment manufacturing. Parameters Material: Ti Porousity: 50%-80% Size: 1000 2000mm Thickness: 0.2mm-1.0mm(0.2mm 0.4mm 0.8mm 1.0mm) Filtration rate: 10um 20um 30um and so on Features: Sintered titanium fiber felt is a unique material that possesses several features that make it ideal for various industrial applications. Firstly, the material has a high strength-to-weight ratio, making it an attractive choice for applications where weight is a critical factor. Additionally, sintered titanium fiber felt is highly resistant to corrosion, even in harsh environments, making it an excellent choice for chemical processing applications. The material is also highly durable and can withstand high temperatures, making it a suitable choice for aerospace applications. Application Sintered titanium felt has a wide range of applications in the field of proton exchange membrane and gas diffusion layer (GDL). Here are some of the applications of sintered titanium felt in these fields: fuel cells: Sintered titanium felt is used as a gas diffusion layer in fuel cells. It is an excellent material for this application because it is highly porous and has good electrical conductivity. The high porosity of the sintered titanium felt allows for uniform gas distribution and efficient mass transport, which is critical for the performance of fuel cells. Electrolyzers: Sintered titanium felt is also used as an electrode substrate in water electrolysis systems. The high surface area of the sintered titanium felt provides a large active surface for the electrode reactions to occur, which enhances the efficiency of the electrolysis process. Gas purification: Sintered titanium felt is used as a gas purification medium in gas separation and purification systems. Its high porosity and good thermal conductivity make it an ideal material for this application because it can effectively remove impurities from gases and maintain a stable temperature during the purification process. Catalysis: Sintered titanium felt is also used as a catalytic support material in various chemical and industrial processes. Its high surface area and porosity make it an excellent substrate for supporting catalysts, which can enhance the efficiency and selectivity of chemical reactions.
Pure titanium processing parts have high titanium content, good plasticity, easy processing and forming, and good stamping and welding performance. It is resistant to corrosion in the atmosphere, ocean, and other conditions. Pure titanium processing parts are mainly used in aircraft skeletons, ship pipes, valves, pumps, heat exchangers, distillation towers, coolers, ion pumps, and compressor valves. In the industry, Ta1 is generally required for high formability, Ta3 is used for wear resistance and high strength, and Ta2 is the most widely used in general. Product parameters Product Name: Titanium Processing Parts Material grade: TA1 TA2 TC4 TA9 TA10 TA15 TC11 Executive standard: GB/T, GJB, AWS, ASTM, AMS, JIS Process state: Annealed state (M) hot working state (R) cold working state (Y) (annealing, ultrasonic flaw detection) Surface treatment: Sandblasting surface bright surface Product use: Aerospace equipment, petrochemical, shipbuilding, automobiles, watch accessories, etc. Features High-quality material selection Professional processing Fine workmanship Special customization The characteristics of titanium 1. It has a low density, a high strength, and a high specific strength. Titanium has a density of 4.51g/cm3, which is 57% that of steel, less than twice that of aluminum, and three times stronger. Titanium alloy has the highest specific strength of any regularly used industrial alloy. Titanium alloy has a specific strength that is 3.5 times that of stainless steel, 1.3 times that of aluminum alloy, and 1.7 times that of magnesium alloy. As a result, it is a necessary structural material in the aerospace sector. 2. Excellent corrosion resistance Titanium's passivity is dependent on the presence of an oxide film; its corrosion resistance in oxidizing media is far superior to that in reducing medium, and fast rate corrosion can occur in reducing medium. Titanium is not rusted in some corrosive environments. 3. Excellent heat resistance Aluminum typically loses its initial high mechanical qualities at 150 C, stainless steel at 310 C, and titanium alloys retain good mechanical properties at around 500 C. When the airplane achieves 2.7 times the speed of sound, the surface temperature of the aircraft mechanism hits 230 C, and the aluminum alloy and magnesium alloy can no longer be used, while the titanium alloy can. Titanium has a high heat resistance, making it ideal for turbine disks, aeroengine compressor blades, and aircraft rear fuselage skins.
Dia 40mm titanium fiber felt is made by a special laying process and a special ultra-high temperature vacuum sintering process. Compared with titanium powder sintered plate, Ti fiber felt has an excellent three-dimensional network, porous structure, high porosity, large surface area, uniform pore size distribution, special pressure, and corrosion resistance, and can be rolled and processed. Titanium fiber felts are widely used in military, aerospace, civil, medical care, and other industries abroad. Titanium fiber felts are primarily used in electrolyzer stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. Features: has an excellent three-dimensional network porous structure; high porosity, several times larger surface area; uniform pore size distribution, strong corrosion resistance, good water permeability; high porosity, and heat dissipation; good performance, high current density, low voltage, stable performance, long life, and so on. Parameters Color: Light grey Dimension: Customized as request Thickness:0.2mm-2mm Often made thickness (0.25,0.4,0.6,0.8mm) Porosity:30-50%
Titanium Products.
Titanium semi-finished materials, including titanium sheet, titanium bar, titanium tube, titanium wire, titanium forgings and titanium powder..
Titanium wire, titanium bar, titanium plate, titanium tube, copper.Shipping
