Pure titanium processing parts have high titanium content, good plasticity, easy processing and forming, and good stamping and welding performance. It is resistant to corrosion in the atmosphere, ocean, and other conditions.
Pure titanium processing parts are mainly used in aircraft skeletons, ship pipes, valves, pumps, heat exchangers, distillation towers, coolers, ion pumps, and compressor valves. In the industry, Ta1 is generally required for high formability, Ta3 is used for wear resistance and high strength, and Ta2 is the most widely used in general.
Product parameters
Product Name: Titanium Processing Parts
Material grade: TA1 TA2 TC4 TA9 TA10 TA15 TC11
Executive standard: GB/T, GJB, AWS, ASTM, AMS, JIS
Process state: Annealed state (M) hot working state (R) cold working state (Y) (annealing, ultrasonic flaw detection)
Surface treatment: Sandblasting surface bright surface
Product use: Aerospace equipment, petrochemical, shipbuilding, automobiles, watch accessories, etc.
Features
High-quality material selection
Professional processing
Fine workmanship
Special customization
The characteristics of titanium
1. It has a low density, a high strength, and a high specific strength.
Titanium has a density of 4.51g/cm3, which is 57% that of steel, less than twice that of aluminum, and three times stronger. Titanium alloy has the highest specific strength of any regularly used industrial alloy. Titanium alloy has a specific strength that is 3.5 times that of stainless steel, 1.3 times that of aluminum alloy, and 1.7 times that of magnesium alloy. As a result, it is a necessary structural material in the aerospace sector.
2. Excellent corrosion resistance
Titanium's passivity is dependent on the presence of an oxide film; its corrosion resistance in oxidizing media is far superior to that in reducing medium, and fast rate corrosion can occur in reducing medium. Titanium is not rusted in some corrosive environments.
3. Excellent heat resistance
Aluminum typically loses its initial high mechanical qualities at 150 C, stainless steel at 310 C, and titanium alloys retain good mechanical properties at around 500 C. When the airplane achieves 2.7 times the speed of sound, the surface temperature of the aircraft mechanism hits 230 C, and the aluminum alloy and magnesium alloy can no longer be used, while the titanium alloy can. Titanium has a high heat resistance, making it ideal for turbine disks, aeroengine compressor blades, and aircraft rear fuselage skins.
Racing titanium parts Titanium CNC machine parts Customized precision metal parts CNC machining titanium parts Titanium component Medical cnc machining Non standard fasteners Titanium auto parts CNC titanium motorcycle parts Fastening parts Titanium car parts. Material: Titanium Gr. 2 Gr. 5 , Ti 6Al4V Application: motorcycle, automobile, racing car. Ship equipment. Electronics products, Surgical instruments, medical grade, oil exploration Optical products etc.. Tolerance: +/-0.01mm
Meihua Metals can also supply Titanium Processing Parts, such as titanium rings, flanges,targets,etc. Specifications: Titanium flange 1.Material:Gr1,Gr2,Gr3,Gr4,Gr5,Ti6AL4V ELI,Gr7,Gr9,Gr12,etc. 2.Standard: ASTM A182 AND ASME SA182 3.Product specification:DN10-DN2000 4.application: :chemical equipment, metallurgical, chemical machine, petrochemical. 5. customized sizes are availabe. Minimum Order: Comply with customer's demand. (If the quantity is less than our MOQ, we may recommend you the similar dimension in stock. ) Packaging: Ply wooden cases or In accordance with customers requirement. If you have interests in our products, please don't hesitate to contact us!
Supplier: Titanium bolts, stainless steel pipe fittings, titanium flanges, stainless castings, threaded rods, cam lock couplings, roller chains & chain wheels, big fasteners, alloy parts, high temperature pipe, such 310s, haste alloy c 276,304,316l, and so on.
Services: 1.design stainless steel parts for your requirements
2. oem
Buyer: Titanium coil, stainless steel rods, hydraulic components
Titanium screws, bolts, nuts, washers; according to din / american standard / british standard production specifications (m0.8-m24 or more), can also be processed in accordance with the drawings. Application areas: racing, chemical, machinery and other industries Shop sign:gr2, gr5, gr7, gr12 Standard:din7, din84, din85, din912, din931, din933, din934, din963, din975 , din6912, din6923, din7991, etc.
U.S. Titanium machining part According to drawing or sample Gr2, gr5(ti-6al-4v), gr7, gr12 etc. According to drawing
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500â?? continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
High pure Gr1 Gr2 Gr3 Gr5 Gr9 Gr12 titanium plate/sheet 1. Titanium is a kind of rare nonferrous metal. Its density is 4.5g/cm3, it is just 60% of steel. So,it is very lighter than most other metals. We can use it to make high strength, good rigidity and light quality products. 2. It is also well-known as its high strength. It is able to work in the heat of 450-500 continuously. 3. Excellent corrosion resistance:it can work in the wet air,sea water,strong acid and strong alkali. 4. Non magnetic nature:as it is a sort of Non magnetic metal, it cannot be magnetized easily. And its nontoxic nature,a very good compatibility with human tissue and blood. So,it is widely adopted in the field of Medical Science. Titanium plate: 1. Product name: Titanium Sheet 2. Material: GR1, GR2, GR3, GR4, GR5, GR7, GR9, GR12-GR29, Ti11Cr-13v-3Al 3. Standard:ASTM B265,AMS4902,AMS4911,MIL-T-9047G,MIL-T-9046J 4. Specification:T:0.025-80mm W:200-2800mm L:10-4500mm 5. Brand: EnergyTi 6. Origin:Baoji, Shaanxi, China 7. MOQ:10kilogram Quality Control: Our products will be 100% checked and inspected by our QC before packing and shipment. ISO 9001:2018 certificate Quality Inspection: 1. Chemical analysis and Physical Properties test conducted by Bao Ti Group Test center 2. 100% ultrasonic test(UT) 3. Inspect if the surface of the material is contaminated. Features: 1. low density 2. good corrosion resistance property , rustless. 3. non magnetic nature 4. superior quality 5. fast delivery 6. reasonable price Application: Chemical industry, Petrochemical Industry, electrical power industry, military industry, health care industry,Ocean environmental protection, motor vehicle industry, bicycle industry, corrosive environment etc.
Product Introduction Pure Titanium Electrode Porous Fiber Felts, also known as ti felts or ti fiber felts, are commonly used in electrolyzer stacks as the diffusion layer or flow field material on the oxygen (anode) side. Unlike carbon-based gas diffusion layers that cannot be used at the oxygen evolution electrode due to immediate oxidation, titanium fiber felt is an ideal diffusion medium that provides electrical contact between the anode catalyst layer and bipolar plate or current collector component. Its unique properties, including high porosity and uniform pore size distribution, enable efficient gas transport and water management within the cell, enhancing the overall efficiency of the electrolysis process. Overall, the use of titanium fiber felt in electrolyzer stacks improves their durability, reliability, and efficiency in hydrogen production. Parameter Material: pure titanium fiber Max Size: 1000x1000mm Other Size: 200x200mm, 205x205mm, 300x300mm, 305x305mm or customized Porosity: 60%-80% Thickness: 0.25-2mm Features 1. Uniform pore size distribution: Titanium fiber felt´s consistent pore size distribution ensures efficient filtration and separation processes, providing reliable filtration performance. 2. Strong corrosion resistance: Titanium fiber felt´s exceptional corrosion resistance makes it suitable for harsh environments and ensures reliable performance in applications requiring durability and longevity. 3. Good water permeability: Titanium fiber felt´s good water permeability makes it useful for water filtration and wastewater treatment applications, providing clean and safe water for various applications. 4. High porosity: Titanium fiber felt´s high porosity enables high gas and liquid flow rates, allowing for efficient heat transfer and suitable for thermal management applications. 5. Good heat dissipation: Titanium fiber felts excellent heat dissipation properties make it ideal for high-temperature environments, ensuring stable performance and long-term durability.
Titanium Plate and Titanium Sheet We offer titanium plate, titanium sheet, titanium alloy plate, titanium alloy sheet, custom titanium plate and custom titanium sheet. TITANIUM PLATE /SHEET .01" to 3" x up to 110" Wide x to 275" Long [Wider Widths, Custom and Special Shapes (Circles, Rectangles, Squares and Others) available on request.] Plate/Sheet can be Sheared, Saw Cut or Water-Jet Cut to Standard sizes or any Custom size (dependent upon Customer preference and size considerations) 1) Type: hot and cold rolled 2) Grades: most alloys and unalloyed CP grades, Gr1, Gr2, Gr3, Gr5, Gr9 3) Thickness: 0.3 - 60mm 4) Width:
