Sintered Titanium Frit well suited for use in Electrolyzers. These frits have a smooth, porous surface (80 micron filter rating) that gives good support for membranes. A much finer surface than our Expanded Titanium Mesh, this product is recommended to be placed against the membrane when designing higher pressure electrolyzers ( 20 psi).
Custom sizes are available upon request.
Titanium Foam Frit Specifications:
Raw Material: Titanium
Filter Rating: 80 Micron
Thickness: 1.5 mm
Working Temperature: 300 C
Membrane Filtration
Corrosion resistance
Why not use a Carbon based Gas Diffusion Layer in an Electrolyzer
Carbon based GDL materials will be consumed and converted into CO2 gas in the presence of the Oxygen ions and Voltage found on the Anode (Oxygen) side of the electrolyzer. This secondary reaction of oxidizing the Carbon in the GDL will give temporarily lower electrolysis voltage, but this is a short lived phenomenon. The carbon GDL is quickly consumed, resulting in poor compression in the stack, and thus high resistance and lower performance.
You can still used carbon cloth or carbon paper material on the Hydrogen side (cathode) since there is oxygen on that side that will oxidize the GDL material.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The resulting PTL porous titanium sintered plate is then coated with a catalyst material such as platinum or iridium, which helps to increase the efficiency of the hydrogen production reaction. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity. 2.Pore size. 3.Thickness. 4.Catalyst loading. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several key features that make it an effective catalyst for the hydrogen production reaction. Some of the features of PTL porous titanium sintered plates include: 1.High surface area. 2.Corrosion resistance. 3.High conductivity. 4.Tailorable porosity. 5.Durable and long-lastinge. 6.Effective catalyst. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several important applications in various industrial processes. Some of the common applications of PTL porous titanium sintered plates include: 1.Hydrogen production: PTL plates serve as the catalyst for the hydrogen production reaction in electrolyzers, splitting water molecules into hydrogen and oxygen using an electric current. 2.Fuel cells: PTL plates are also used in fuel cells as an electrode material, facilitating the chemical reactions that produce electricity from hydrogen and oxygen. 3.Water treatment: PTL plates are used in water treatment applications to generate hydrogen peroxide or ozone for use as a disinfectant or oxidant. 4.Electrochemical synthesis: PTL plates can be used in various electrochemical synthesis processes to facilitate the production of chemicals and materials such as chlorine, caustic soda, and hydrogen peroxide. 5.Environmental remediation: PTL plates are used in environmental remediation applications to degrade contaminants such as chlorinated solvents and pesticides. Overall, the PTL porous titanium sintered plate is a versatile and important component in various industrial processes, providing efficient and reliable catalytic performance in a variety of applications.
Titanium plates with flow fields are essential components used in electrolyzers for various industrial applications. These plates, made from corrosion-resistant titanium materials, are designed with intricate flow field patterns to optimize the electrochemical process of water electrolysis. Electrolyzers equipped with titanium plates and flow fields play a crucial role in industries such as hydrogen production, water treatment, and chemical processing. Electrolysis is a process that involves the decomposition of water into hydrogen and oxygen gases through the application of an electric current. Titanium plates with flow fields are specifically designed to enhance the efficiency and performance of this electrochemical reaction. The flow field pattern on the titanium plate ensures a uniform distribution of gases and electrolytes, maximizing mass transfer and minimizing concentration gradients. This results in improved electrolysis efficiency, higher production rates, and enhanced product quality. The flow field pattern on the titanium plates can vary depending on the specific electrolyzer design and application requirements. Common flow field patterns include serpentine, interdigitated, or customizable designs tailored to optimize mass transfer and current distribution. The flow fields induce controlled turbulence, reduce diffusion path length, and prevent the accumulation of gas bubbles, further enhancing the overall efficiency of the electrolysis process. Specifications: Material: Titanium (Grade 2 or Grade 5) Plate Thickness: 0.5-30 mm Flow Field Pattern: Serpentine, Interdigitated, or Customizable Dimensions: 90*90mm Customizable Features Enhanced Mass Transfer: The flow field pattern on titanium plates promotes efficient mass transfer of gases and electrolytes, ensuring uniform distribution and maximizing the electrochemical reaction efficiency. Improved Current Distribution: The optimized flow field design helps achieve uniform current distribution across the electrode surface, minimizing localized effects and improving electrolyzer performance. Extended Lifespan: Titanium's corrosion resistance and durability contribute to the longevity of electrolyzers, reducing maintenance costs and downtime. Customizable Designs: Titanium plates with flow fields can be customized to meet specific electrolyzer requirements, allowing for optimized gas and electrolyte flow patterns tailored to the application.
Titanium plates with flow fields are essential components used in electrolyzers for various industrial applications. These plates, made from corrosion-resistant titanium materials, are designed with intricate flow field patterns to optimize the electrochemical process of water electrolysis. Electrolyzers equipped with titanium plates and flow fields play a crucial role in industries such as hydrogen production, water treatment, and chemical processing. Specifications: Material: Titanium (Grade 2 or Grade 5) Plate Thickness: 0.5-30 mm Flow Field Pattern: Serpentine, Interdigitated, or Customizable Dimensions: 90*90mm Customizable Features Enhanced Mass Transfer: The flow field pattern on titanium plates promotes efficient mass transfer of gases and electrolytes, ensuring uniform distribution and maximizing the electrochemical reaction efficiency. Improved Current Distribution: The optimized flow field design helps achieve uniform current distribution across the electrode surface, minimizing localized effects and improving electrolyzer performance. Extended Lifespan: Titanium's corrosion resistance and durability contribute to the longevity of electrolyzers, reducing maintenance costs and downtime. Customizable Designs: Titanium plates with flow fields can be customized to meet specific electrolyzer requirements, allowing for optimized gas and electrolyte flow patterns tailored to the application. Applications Hydrogen Generation: Electrolyzers equipped with titanium plates and flow fields are extensively used in industries involved in hydrogen production, enabling the production of clean and sustainable hydrogen gas for fuel cell applications, energy storage, and industrial processes. Chlor-Alkali Industry: Titanium plates find applications in the chlor-alkali industry, where electrolysis is employed to produce chlorine, caustic soda (sodium hydroxide), and hydrogen. The plates' resistance to highly corrosive electrolytes and durability make them suitable for this demanding application. Desalination: Titanium plates with flow fields are utilized in electrochemical desalination processes, where they play a vital role in the removal of salt and other impurities from seawater, making it suitable for drinking water or industrial use. Electrosynthesis: Titanium plates are used in electrosynthesis applications, where electrochemical reactions are employed to synthesize various chemicals and pharmaceutical intermediates. The flow field design on the plates helps facilitate efficient mass transfer and uniform current distribution, enabling controlled and precise electrochemical reactions.
Sheet :Thickness:0.6-10mm Max Length:1000mm Max width:340mm Pipe : OD10-150MM* wall thickness 2-5MM Materials : titanium GR1 GR2 Feature: 1.Working Temperature:-200-1000°C 2.Corrosion Resistance 3.High Filtering Efficiency 4.Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc 5.Easy to welding and long working life Filter Shape: Could be cartridge filters,disc filters ,cup filters,cap filters,filter palte and etc Application: separation and purification of solid-liquid, gas-liquid and gas-solid in the petrifaction, hydraulic manufacturing and medical apparatus and instruments of basic industries. Technique parameters titanium powder sintering filter element technique parameters using temperatur:â?¤300°C filtering level filtration precision um maximum diameter um permeability coefficient 10-12m2 permeability m3/h.m2.kpa thickness mm compression strength Mpa/cm3 T9 0.2 2.5 1.5 0.6-10 3 T8 0.5 4 3 0.6-10 3 T7 1 6 5 0.6-10 3 T6 2 10 15 0.6-10 3 T5 5 15 0.04 40 0.6-10 2.5 T4 10 30 0.15 120 0.6-10 2.5 T3 20 60 1.01 250 0.6-10 2.5 T2 30 100 2.01 500 0.6-20 2.5 T1 50 160 3.02 800 0.6-20 2.5 The product performance can achieve and even exceed GB. The internal pressure of powder rolled and roll tube welding is more than 0.3Mpa
Constituent part an electrolytic circuit board and two electrodes (a cathode and an anode) which consists of a system that uses electricity to break water into hydrogen and oxygen in a process called electrolysis. Electrolytic circuit board: Patented medical grade electrolytic water technology can accurately control the current. Electrodes: Gr1 Titanium, nano-coating and high sintering, coated with Platinum, Iridium, Ruthenium. Superior corrosion resistance and high electrolytic rate. Application: smart toilet, bathtub, mopping machine, washing machine, dental irrigator, household dishwasher, etc.
Product Introduction Sintered titanium felt is a kind of porous material created from tiny titanium fibers that have been flattened down and annealed to provide a smooth, flat surface ideal for use in a variety of industrial applications. This unique material has a range of features that make it ideal for use in a wide range of applications. In the production of hydrogen and fuel cells, sintered titanium felt is used as a Liquid/Gas Diffusion Layer (LGDL) in stacks, where it helps to distribute the reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. The material´s high corrosion resistance, even under highly acidic and humid conditions, makes it an ideal material for use in these applications. Parameters Material: Titanium Size: 1500 1200mm Fiber size: 20 microns-40 microns Thickness: 0.20mm, 0.25mm, 0.40mm, 0.60mm Porosity: 60%-75% Porosity and size can be customized. Features Porous structure: Sintered titanium fiber felt has an excellent porous structure, which provides high filtration efficiency and large dirt holding capacity. Thermal conductivity: The material has strong thermal conductivity, making it an ideal material for use in high-temperature applications. Precisionandaperture control:Sintered titanium fiber felthas precise precision and aperture control, which makes it suitable for use in applications where precise filtration is necessary. Corrosion resistance: The material has high corrosion resistance, even under highly acidic and humid conditions, making it ideal for use inharsh environments.
Product Introduction The sintered corrugated plate is a corrugated plate made by the powder metallurgy process. It is usually made of metal or alloy powder through mixing, pressing, sintering, and other processes, and has excellent properties such as high strength, corrosion resistance, and high-temperature resistance. The manufacturing process of powder-sintered corrugated board is relatively simple, and can be customized according to specific needs, with high material utilization and production efficiency. At the same time, its corrugated shape can increase its surface area and channel length, improving its filtration and separation efficiency. In the fields of chemical industry and petroleum, the powder-sintered corrugated plate has become a kind of necessary filtration and separation equipment. In applying titanium sintered corrugated plate and ordinary titanium sintered plate in the electrolytic cell, titanium sintered corrugated plate has some advantages over ordinary titanium sintered plate. First, the corrugated shape of the titanium sintered corrugated plate can increase its surface area and channel length, which helps to improve the efficiency and yield of the electrolysis reaction. Secondly, the titanium sintered corrugated plate can improve the fluidity and mixing of the electrolytic cell, which is beneficial to the electrolyte�´s uniform distribution and the reaction product�´s rapid discharge. The corrugated structure on the surface of the titanium sintered corrugated plate can indeed increase the electrode surface area, increase the current transfer efficiency, and thus improve the electrolysis efficiency. In addition, it can also increase the mechanical strength and stability of the electrode, reduce the electrode�´s deformation and damage, prolong the electrode�´s service life, and reduce the maintenance cost. Therefore, the corrugated structure on the surface of titanium sintered corrugated plate has important application value in electrochemistry, but it does not directly affect the conductivity in the electrolyte solution. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the customer´s designated place without damage.
Product Introduction Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Sintered porous titanium plates are used in various applications where a high level of strength and durability is required, such as in the aerospace, automotive, and medical industries. Parameters Material: Titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm Dia: 1MM above Features 1. High Strength-to-Weight Ratio: Sintered porous titanium plates have a high strength-to-weight ratio, which means they are strong and durable while also being lightweight. This makes them ideal for applications where weight is critical, such as in the aerospace industry. 2. Corrosion Resistance: Titanium is highly resistant to corrosion, making it ideal for use in harsh environments where other materials may corrode or degrade over time. This makes sintered porous titanium plates a good choice for applications in the chemical and petrochemical industries. 3. Biocompatibility: Titanium is biocompatible, which means it is not toxic to living tissue and does not cause adverse reactions when implanted in the human body. This makes sintered porous titanium plates ideal for medical applications such as implants and prosthetics. 4. Customizable Pore Size and Distribution: Sintered porous titanium plates can be customized to have specific pore sizes and distributions, which makes them useful for applications such as filtration and catalysis. 5. High-Temperature Resistance: Titanium has a high melting point and can withstand high temperatures, making it ideal for use in high-temperature applications such as heat exchangers and furnace components. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then molded and pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
Product Introduction Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1 3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories.