Conductive PET Mylar Copper Foil Tape Insulation Copper Foil Tape For Soldering Descriptions: Mylar copper foil tape is composite material consisting of copper foil laminated onto a polyester film base, and this is suited to fields which demand electrical characteristics. Then copper foil sided coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the copper foil from damaged and oxidized. The copper foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable, and other needs of anti interference shielding. Electronic equipment shield FPC Electric wire shield
Descriptions: Double Copper Foil Tape is as a smooth copper (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is also conductive. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
Single Sided Conductive Adhesive Copper Foil Acrylic Adhesive Tape Descriptions: Single Copper Foil Tape is as a smooth copper (purity is 99.95%) foil backing with a not conductive acrylic pressure-sensitive adhesive and liner. The unplated copper with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Dead soft copper foil backing for good shielding effectiveness, soldering and converting (slitting and die cutting). Acrylic pressure-sensitive adhesive has good resistance to heat, oxidation, solvents and oils. Removable liner on adhesive side makes it easy to handle, protect the adhesive prior to application and die cut complex shapes. Applications: Commonly used for RFI/EMI (radio-frequency interference or electromagnetic interference) shielding and ESD (electrostatic discharge) grounding for components, integrated circuits, connectors, cables, motors, equipment enclosures/cabinets and shielded rooms. Conductive circuit or bus bar for low voltage applications Used in jobs requiring high conductivity or shielding effectiveness for a given thickness. Best used in non-corrosive environments.
Descriptions: Double aluminum foil tape is as a smooth aluminum (purity is 99.95%) foil that also has an adhesive coating, but this adhesive coating is conductive. The unplated aluminum foil with conductive adhesive is a common EMI shielding tape for non-corrosive conditions. Features: Good viscosity, Cold resistance Mechanical resistance, Moisture resistant High heat and electric conductivity Excellent ductility and corrosion resistance Flame retardant Easy to tear apart Applications: Electric and electric springs, switches Lead frames Connectors and oscillation reeds Battery Communication cable Cable armoring Mobile phone main board Ion battery production lamination with PI film PCB collector (electrode backing) materials
PET Laminate Mylar Aluminum Foil Tape For FFC Descriptions: Mylar aluminum foil tape is composite material consisting of aluminum foil laminated on to a polyester film base, and this is suited to fields which demand electrical characteristics. Then aluminum foil side coated with conductive or not conductive acrylic adhesive. Features: The PET film can protective the aluminum foil from damaged and oxidized. The aluminum foil is conductive. the PET film is Insulation effect. Applications: Computer peripheral wire EMI shielding Used in coaxial cable, local area network wire and electronic communications cable and other needs of anti interference shielding. Electronic equipment shield Soft FFC of TV Electric wire shield
Descriptions: Thermal conductive glue is made of an advanced thermal conductive pressure sensitive adhesive.Xinst-P80XXN series provides a better way for applications requiring good adhesion strength and superior thermal conductive efficiency. Xinst-P80XXN series is suitable to apply to electronic mechanical components assembly such as the heat sink module and LED light bar module to provide a better heat-transfer path between heat-generating components and heat sink or other cooling devices. Features: Complete thickness standard is available. Various structures are for different applications. Stable and economic. Superior adhesion strength and thermal conductive efficiency. Applications: Assembly of the heat sink and DDR-RAM module. Assembly of the LED light bar module and metal frame bezel. Die-cut piece and Laminate. Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.
Descriptions: Fiberglass thermal conductive tape is made of glass fabric, double sided coated advanced thermal conductive pressure sensitive adhesive.Xinst-P80XXC series provides a better way for applications requiring good adhesion strength and superior thermal conductive efficiency. Xinst-P series is suitable to apply to electronic mechanical components assembly such as the heat sink module and LED light bar module to provide a better heat-transfer path between heat-generating components and heat sink or other cooling devices Features: Complete thickness standard is available. Various structures are for different applications. Stable and economic. Superior adhesion strength and thermal conductive efficiency. Applications: Assembly of the heat sink and DDR-RAM module. Assembly of the LED light bar module and metal frame bezel. Die-cut piece and Laminate. Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.
Descriptions: Rubber Thermal Conductive Silicone Pad is a kind of thermal interface with high performance. It is soft, self-sticky and elastic. It can fill the gap between heat-generating components and heat sink, metal mechanism and shell or other cooling devices. The heat can be transferred out speedily so as to improve the electronic components' working efficiency and prolong the life-span of equipments. Features: Excellent thermal conductivity and electrical insulation. Soft, self-sticky and elastic. Can be used as buffer absorber. Multiple thicknesses, hardness, and thermal conductivities. Meet the environmental requirements of ROHS and UL. Applications: High Power products like LED lights, LED TV, etc. PDP, LCD, Laptop, PC, Communication hardware equipments, Routers, etc. IC, CPU, COP, Capacitance, MOS, Power Supply Module, Server, Player, Mobile Phone, etc.
Descriptions: Conductive Double Sided Tape is consists of a unique electrical conductive pressure-sensitive acrylic adhesive and a high quality release liner.Xinst411T provides a better way for applications requiring excellent conductivity.Besides,Xinst411 transfer tape is made of a unique PSA to assure the adhesion to many kinds of substrate such as conductive fabric, aluminum foil, copper foil and so forth. Features: Offer wide range of usage and service temperatures. Excellent electrically conductive performance Supplied on a removable liner for easy handling and die-cutting. Thinner for avoiding remaining adhesive residual after slitting. Applications: EMI shielding applications in mobile phone, notebook, PC and others electronic products. EMI shielding applications in connector, FFC and wire stock etc. Die cut pieces and laminate.
RFID EMI Blocking Nickel Copper Conductive Fabric Tape Descriptions: Conductive Fabric Tape is constis of a superior conductive fabric backing coated with a specific electrically conductive pressure-sensitive acrylic adhesive to one side or two side, then coated a excellent release liner. It is typically used for applications requiring good electrical conductivity to achieve the EMI shielding objective. Besided, high performance acrylic adhesive to assure its adhesion to many kinds of substrates such as metal, plastic and so forth. Features: Ideal solution for EMI and RF shielding To protect from electromagnetic radiation interference, and electronic attacks, to secure the normal operation of equipments. To protect information security from electromagnetic leakage To protect human body, high sensitive equipments, etc from electromagnetic radiation injury. Good thermal insulation property, and suitable for tropical and cold areas target. Applications: EMI shielding applications in mobile phone, notebook, PC and other electronic products. EMI shielding applications in connector, FFC and wire stock etc. Extra-work, Die cut pieces and laminate.
Descriptions: Acetate cloth rubber tape is a insulating tape made from acetate fabric coated with a rubber adhesive. Highly compatible with resins and varnish, this tape achieves stable adhesive property. As this tape is made from flexible acetate fabric, it works well on uneven surfaces and is optimal for use in binding harnesses, etc. Features: Easy to use. Working performance is good. Great flexibility to bumpy surface. Applications: For banding of wire harness. For electrical insulation and fixing electronic components.
Descriptions: Copper foil glass cloth tape is copper foil laminated to glass cloth with silicone adhesive can be use for EMI shielding. Features: Shield against EMI/RFI radiation The tape is conductive throughout, including the adhesive, and offers mechanical, electrical, and thermal values to meet shielding requirements Applications: mainly used in all kinds of electronic products, high frequency transformer transmission cover or isolate the interference with the electromagnetic wave or radio waves.
Descriptions: Glass cloth tape is use imported glass cloth coated with high-performance silicone the glass cloth tape is made, with strong paste, tough and resistant to tear and so on, the tape is of particularly high price, the tapecan completely replace the 3M-69 # \ P212 \ TESA4618 \GT-66\imported glass cloth tape in performance. Features: Good stability, can work under 260 â?? for a long time, can withstand 260â?? high temperature short time. Soft, tear resistance, adhesive power is strong, not easy to deformation, suitable for all kinds of special-shaped material surface paste protection. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue. High mechanical strength, suitable for coil are tightly wrapped; Product application: transformer (especially high frequency modulator, microwave Applications: Motor and transformer coil wrapping. For battery wrapping when assembling. High Temperature protection Sandblasting protection
Descriptions: Double sided glass cloth tape is with imported glass cloth as the basic carrier, and coated with the pressure-sensitive silicone adhesive on both sides, and combined with the fluorine release liner. It has excellent high temperature resistance, easy removal, and good adhesion. Especially because of it's excellent high tempearture resistance, it can also be. It features good temperature resistance, good tensile strength, good chemical resistance, no residue, in line with ROHS and halogen free etc. Features: Good stability, can work under 260 â?? for a long time, can withstand 260â?? high temperature short time. No adhesive residue, high temperature for a long time after curing tear tape, leaving no residue. Applications: Mostly applied in the fixation of the surface board and the other parts during the production process of the electrical parts of digital products. Used for the temporary fixation, masking and protection of the accessories under high temperature process
Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips Product Description PORON is a fine pitch open cell urethane foam produced by Rogers Corporation. The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns. Poron Foam tape Features: Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required. Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices. Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications. Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface. Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies. Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side. Poron Foam tape Applications: Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications. For Sealing, Gasketing, and Cushioning.
Die Cut Double Sided EVA Foam Tape Into Any Size Descriptions: The EVA foam tape is EVA foam coated with adhesive one sided or two sided.EVA (Ethyl Vinyl Acetate) foam is a closed cell, chemically cross linked, (and non-cross linked) foam, made from ethyl vinyl acetate copolymers. It is made in block (bun) form, or extruded and is available in a range of densities (molecular weights) and hardnesses. EVA foam tends to be a good thermal insulator, excellent shock absorber and is resistant to attack from chemicals and fuel based products. Its closed cell structure makes it impervious to water. EVA foam is an extremely versatile product suiting a broad range of different uses and applications. It is an effective replacement for many materials including felt, neoprene, natural rubber, polyurethane foam, pvc foam, wood composites, mineral wool and fibreglass. Features: Impact and vibration absorption. Weather and chemical resistance including splash resistance to oils and fuels. Acoustic and thermal insulation properties. Buoyancy with low water absorption. Suitability for thermo-forming and thermo-moulding. Applications: Health Care; Splinting, Cervical Collars, Orthopaedic Shoes, Insoles, Exercise Mats, Orthotic Supports, Packaging, Cushion Packaging. Foam; Corner Pads, Case Inserts, Display Packaging Foam. Sports & Leisure; Trampoline Pads, Buoyancy Aids, Kickboards, Sports Mats, Body Protection, Canoe Seats, Toys and Games, Camping Bedrolls. Footwear; Wedge Soles, Runner, Top Line Padding, Moulded Soles, Orthotics. Appliances; Gaskets, Vibration Pads. Automotive; Gaskets and Seats, Carpet Underlay, Headliners, Interior Padding. Building; Nail Washers, Expansion Joints, Glazing Seals, Eaves Fillers, Impact Sound Deflect, Insulation. Marine; Deck Tread, Life Jackets, Life Buoys, Fenders, Oil Boom Floats, Cockpit Cushions. Electronics; Work Station Mats, Shock Absorbing Pads. OEM Size:Special length, thickness or combinations can be supplied per customer's request.Products can be supplied in roll, tape,sheets or shapes per customer's request.Only you provide the CAD drawing,we can die cut any size for you. Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton
PE Foam Double Sided Tape For Mirror Mounting Descriptions: PE foam double sided tape is polyethylene foam double sided coated with acrylic adhesive, range provides solutions to practically every industry for bonding, mounting, fixing and joining applications. The products are economical, easy and quick to apply, clean to use, adaptable, versatile and consistent. Features: No residue, easy to control the interface Strong adhension, double-stick and anti-crack Good wather resisitance,heat resisitance and anti-chemicals ect Durable and accmodated irregular surface Good isolation and buffering Applications: Widely used for flexible conjunction of furniture, construction and decoration. Automobile foam tape usually used on rough and uneven surface: sticking signboard, mirror, map etc. Protecting the glass board and packing electric accessories for eliminating noise and reducing vibration function
No Residue Removable Foam Double Sided Tape Descriptions: Removable foam double sided tape is use imported PU glue raw materials, one side(Permanent sided) stick strong PET film double-sided adhesive for fixing paste, the other side(Removable sided) for attaching your phone, can repeatedly paste, without leaving any traces. Features: Water resistance: non-absorbent, moisture-proof, water-resistant Permanent sided works well with plastics. Removable sided leaves no residue, can reused more than 200 times. Removable side can be washing when it is dirty. Applications: Apply to plastic, wood, leather, glass, aluminum alloy, ceramic tile, marble, metal, cement and other materials Hook tape for use in the daily life, such as plastic, clothes hook in the bathroom, towel, PSP, tablet computer protection fixed, automobile anti-skid stop slippery mat, 3 d mouse pad, etc
OCA Optically Clear Double Sided Adhesive Tape For Touch Panel Descriptions: OCA(Optically Clear Adhesive) double sided tape are highly specialized optically clear free-film adhesives offering superior clarity and excellent adhesion to various types of transparent substrates. They are easy to convert and are contaminant-free, resulting in improved bubble resistance in laminations exposed to high temperature and high humidity. Common applications include displays, touch panels and others requiring an optically clear bond. Features: Superior transparency. Very little change in appearance even when exposed to light or in a hot and humid climate. Suitable for bonding materials such as glass and polycarbonate to plastics. Manufactured in a clean room. Outgassing of plastics such as polycarbonate controls bubble formation and allows ink to follow uneven surfaces. Applications: Touch screens- for bonding film and glass laminates. Avionics/military displays. Transparent graphic overlays. Optical management films for LCD. Projection screens.
Equal To 3M467 3m468 Descriptions: Equal To 3M467 3m468 Double sided transfer tape have a release liner designed for ease of application. The acrylic adhesive film is stabilized, even though the adhesive has no carrier. Transfer tapes exhibit very high quick stick and holding power, even at elevated temperatures. Adhesive transfer tapes are used for mounting, splicing, and for closure. Equal To 3M467 3m468 Features: Clarity virtually free of vapor inclusions that are commonly found in adhesives produced by the traditional solvent coating technique.â?¢ Provides some initial repositionability when bonding to plastic parts (not metal) which allows graphic parts to be lifted and repositioned if initial alignment is incorrect. Equal To 3M467 3m468 Applications: Long term bonding of graphic nameplates and overlays to metal and high surface energy plastics in the aerospace, medical and industrial equipment, automotive, appliance and electronic markets. Bonding metal nameplates and rating plates in the aerospace, medical and industrial equipment, automotive, appliance and electronic markets. Bonding graphic overlays for membrane switches and for bonding the completes witch to the equipment surface. High speed processing of parts in the medical, telecommunications and electronics markets (medical components, durable labels, flexible circuits). Lamination to industrial foams for rotary die-cutting of small gaskets for industrial and electronics markets.
