High temperature polyester tape, high temperature tapes are made from PET as backing material, then coated with high temperature resistance of silica gel, the overall heat resistance can reach 220�¢?? Celsius for 30 minutes, has good high temperature resistance, electrical insulation, chemical resistance, high adhesion, soft break and no residue leaving again to tear away from features such as widely used in circuit board dipping process, protection of circuit board, to prevent the plating solution and pollution, easy tear up, no adhesive residue, good ductility, friction resistance, good adhesive tape is the PCB protection.
SRST-151 Electrical Tape is a high quality insulation tape produced from a polyester film that is coated on one side with a Acrylic adhesive. The result is a 0.058mm tape which exhibits excellent conformability and good electrical strength. Polyester Film tape is typically used as layer or coil cover insulation in applications where temperatures will not exceed 130 C. This tape is varnish resistant
Polyimide Film is produced by cast method, which has high temperature resistance, resistance to
radiation and excellent dielectric properties. It is applicable to electrical insulating of the class H electric
motor and other electrical equipments, and other use electrical insulating materials.
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Product Description
"RT-101 is a light strength fiberglass reinforced biaxially-oriented polyester film tape with a aggressive solventless pressure sensitive hot melt adhesive. Exhibits
high impact strength excellent adhesion to kraft cartons and bundling applications."
Main Application
* Unitizing
* Strapping
* Packaging
* Transport securing
* Bundling and palletzing
Construction
*Backing:25 mic Polyester film*Adhesive:Pressure sensitive hot melt
*Backing Color:Transparent*Reinforcement:Mono-directional glass yarn
Typical Physical Properties
Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Test before massive using is recommended.
Typical Physical Properties
Total Thickness:0.13 mmASTM D-3652
Adhesion to Steel:75 oz / in20 N / 25mm2.0kg/25mmASTM D-3330
Tensile strength:138 lbs./ in600 N/25mm61kg/25mmASTM D-3759
Elongation at Break:3~5%ASTM D-3759
Service Tem recommended:0 ~70 ( 32 ~158°F)
Storage Conditions
Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80°F) and 40~50% relative humidity are recommended. Rotate your stock.
Brown Economy Grade Water Activated Gummed Kraft sealing tape
Kraft Paper Tape is naturally a more eco-friendly choice in carton sealing. We start with a renewable paper backing, add interwoven fiberglass threads and finish it off with a water-activated, high-performing corn starch adhesive. Best of all, Eco Enclose Kraft Paper Tape will not only out-perform your plastic tape, but it is actually more affordable per carton seal in comparison to your standard plastic tapes. Plastic tape may require several strips over the same seal to provide the same holding power of just one strip of paper tape.
Technical Datas
Adhesive Starch Glue
Backing Whole wood pulp kraft paper
Rubber surface quantitative >=32 gsm
Bursting strength 28 N/CM²
Tensile (lengthways) >=200 N/25mm
Tebsile (horizontal) >=80 N/25mm
Release force >=0.85 KGF
Space between string(horizontal) 1cm ±1mm
Jumbo Roll Size 960mm x 2000m/3000m/4000m
ANTI-SPLASH TAPE USED IN MARINE & OFFSHORE
Anti-Splash tape is constructed of an aluminum or glass cloth laminate coated with a high temperature silicone adhesive.
Anti-Splash tape is enhanced with a fire retardant (self-extinguishing) adhesive layer. At the same time, it is also water resistant. In addition, the maximum working temperature of tape is up to 150 °C.
It is designed to prevent hazardous liquids (oil/fuel) spraying outs or leaking from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations.
Anti-Splash tape is widely used to wrap around tubing, hoses, fittings, flanges, and valves in the marine and offshore industry.
Total thickness 9.5 mils
Colour Silver
Max. temperature Up to 150 °C (300 °F)
Pressure 300 psi
Tensile strength 93.2 lbs. per inch (ASTM-882)
Adhesion Above 1000 grams, 25 mm g/f
Adhesion to steel 5.8 lbs. per inch (ASTM-33330)
Aging properties Indefinite shelf life when properly stored
INSTALLATION STEPS
Three steps to install anti-splash tape on the flange.
Steps for installing anti-splash tape on the flange
Three steps to install anti-splash tape at the junction of the two pipes.
Steps for installing anti-splash tape on pipes
This picture shows the different conditions before and after using anti-splash tapes.
Different conditions before and after using anti-splash tapes
PTFE adhesive tape
We selected fine imported fiberglass, wove it as the basic cloth and coat it with PTFE resin, proceed under high temperature condition, the product is called PTFE adhesive tape.
Thickness(mm),width(mm),length(mm),Temperature(ºC)
0.08,10-1200,10-50,-70-260
0.13,10-1200,10-50,-70-260
0.18,10-2000,10-50,-70-260
0.25,10-2000,10-50,-70-260
Pure polytef adhesive tape: made of superior pure PTFE (polytef).
Thickness(mm),width(mm),length (mm),Temperature(ºC)
0.08,10-400,10-50,-70-230
0.13,10-400,10-50,-70-230
0.18,10-400,10-50,-70-230
0.25,10-400,10-50,-70-230
Securitypack is a professional manufacturer of tamper evident label material (total transfer tamper evident printing material;partial transfer tamper evident printing material; non-transfer tamper evident printing material).
We are company located in latvia and we manufacture flax fiber tape. Flax tape is made from a natural product - flax fiber. It is an perfect eco material for log builds embedding between logs and sealing of slits.
Flax tape also can be used for:
· wall, ceiling, roof, and underfloor insulation
· window and door frames insulation
· sound isolation
· upholstered furniture making
· door insulation
· floors under the parquet and laminate
Flax tape is easy to use and is completely safe, ecological material with good air and gas diffusion options, as well as keeps a steady level of humidity. It has a very high thermal insulation capability and soundproofing. The material does not create static electricity and does not conduct electricity. Can be cut to a width of 3 cm to 170 cm. Thickness 6, 8, 10, 15, 20 mm.
