Rudder(Xiamen) Industrial Co., Ltd.

Code RT-021D Specification Tape Double sided Butyl Tape with carrier Adhesive color Black Butyl Thickness 2.0 mm Carrier Mesh Fiberglass Liner color White release paper Items Standard Date Test Date "Holding Power (mins) Top face 20 22 Bottom face 22 Heat resistance "80°C, 2 hoursNo dripping, No chap No deformation""No dripping, No chap No deformation" Cold resistance -40°C No deformation No deformation "Peel adhesion to (N/mm)" waterproof roll 0.4 0.53 Cement mortar board0.6 0.70 Steel plate 0.75 "Peel strength retention rate (%)""Heat treatment 80°C, 168 hours"waterproof roll 80 108 Cement mortar board 83 Steel plate 105 "Alkali / Saturated calcium hydroxide solution treatment 168 hours" waterproof roll 884 Cement mortar board 104 Steel plate 99 "Soaking treatment (water) 168 hours "waterproof roll 80-97 Cement mortar board 114 Steel plate 89 Note Waterproof roll is EPDM Summary Date reach standard data, qualified product, Butyl Tape Butyl Tape also know as sealing butyl (sealant) tape, used as waterproofing material in constrcution, Automobile industry and so forth. Its performence wins lots of trusts from market. Rudder TapesButyl Tape quality equivalent to Japanese, Korean, and enter into markts contains the USA, Australia, Germany, Malaysia, Japan, Russia, India, Korea and so on locate across the 5 continents. We are quite flexible to make custom-made product, based on precise demand from every single customer. For example: thickness includes 0.6 mm, 0.8 mm, 1.0 mm, 2.0 mm, 3.0 mm and so on. Glue color available: black, gray, white, etc. Learn more please click below 1) Single-sided Butyl Tape 2) Double-sided Butyl Tape without Carrier 3) Double-sided Butyl Tape with Carrier Rudder TapesWaterproof Tape coated with butyl rudder and aluminum foil or non-woven, release paper/film as liners. Features: Eco-friendly, non-toxic, Good viscosity (to a varity of surface), waterproof, Heat & Cold resistant, (Tem range (- 40~100 ) High tensile, Flexible, good enlogation, Corrasion,acid and alkali resistant Easy to handle. Application for review: Adhesive performs aggressive to metal, plastic, timber and even concrete floor & wall. Note: please clean subject surface ensure no dusty or sands before sticking. Applications pictures below for reference.

We offer printing service for water activated tape equivalent to ipg 235, ipg 240, ipg 233, ipg 260 etc grade gummed paper tape. for example RT-2WR13 can be printed. RT-2WR13 Reinforced Water Activated Tape Product Description "Ligth duty grade. Reinforced by 3-way fiberglass and manufactured with water activated adhesive for kraft carton sealing. The fiberglass yarn provide consistent performance in carton sealing applications where durability, extra strength and reliability are required. " Application Used for two strip sealing cartons top and bottom. Works well on recycled cartons, and non-unitized loads. Using on the light weight carton is recommended. Physical Properties Thickness 0.145±0.01mm "ASTM D-3652 ""GB/T7125 " MD Tensile 65 lbs/in (283 N/25mm)"ASTM D-3759 ""GB/T7753 " CD Tensile 19 lbs/in (93 N/25mm)"ASTM D-3759 ""GB/T7753 " Construction Top Plyï¼?25 lb Virgin Natural Kraft Paper and virgin fibers Bottom Plyï¼?25 lb Virgin Natural Kraft Paper and virgin fibers MD Reinforcement:(1-1-1-1-1) 110 Fiberglass per 72mm CD Reinforcement:(1-1-1-1) 150 Fiberglass, 1 spacing, at 45° angle Laminating Adhesive:Hot melt adhesive Water-Activated Adhesive:"Modified Starch Based Adhesive " Storage Conditions Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80 ) and 40~50% relative humidity are recommended is recommended.

RT-2WR14 Reinforced Natural Water Activated Tape Product Description "Medium duty grade. Reinforced by 3-way fiberglass and manufactured with water activated adhesive for kraft carton sealing. The fiberglass yarn provide consistent performance in carton sealing applications where durability, extra strength and reliability are required. " Application Used for two strip sealing cartons top and bottom. Works well on recycled cartons, and non-unitized loads. Using on the heavy weight carton is recommended. Physical Properties Thickness 0.15 mm "ASTM D-3652 ""GB/T7125 " MD Tensile â?¥ 72 lbs/in (311 N/25mm)"ASTM D-3759 ""GB/T7753 " CD Tensile â?¥ 19 lbs/in (96 N/25mm)"ASTM D-3759 ""GB/T7753 " Construction Top Plyï¼?25 lb Virgin Natural Kraft Paper and virgin fibers Bottom Plyï¼?25 lb Virgin Natural Kraft Paper and virgin fibers MD Reinforcement:(1-1-1-1-1) 75 Fiberglass per 72mm CD Reinforcement:(1-1-1-1) 150 Fiberglass, 1 spacing, at 45° angle Laminating Adhesive:Hot melt adhesive Water-Activated Adhesive:"Modified Starch Based Adhesive " Storage Conditions Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80 ) and 40~50% relative humidity are recommended is recommended.

RT-1C02 Bi-Directional Filament Tape Product Description RT-1C02 is coated by 28um polypropylene film woven with cross fiberglass reinforcements with a pressure-sensitive hot melt adhesive. Balanced machine direction and cross direction tensile strength, high adhesion and medium impact strength. Bi-directional filaments provide resistance to delamination for improved one piece removability and increased boardiness for automatic application. Main Application * Unitizing * Strapping * Bundling * Transport securing * Packaging and palletzing Construction *Backing:Polypropylene film*Adhesive:Pressure sensitive hot melt *Backing Color:Transparent*Reinforcement:2-ways continuous glass yarn Typical Physical Properties Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Typical Physical Properties Total Thickness:0.12 ± 0.005mmASTM D-3652 Adhesion to Steel81 oz / inASTM D-3330 Tensile strength:93 lbs./ in(160.5N /cm)ASTM D-3759 Elongation at Break:3ï½?5%ASTM D-3759 Service Tem recommended-7 ~75 ( 20 ~167°F) Storage Conditions Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80 ) and 40~50% relative humidity are recommended. Rotate your stock.

RT-1C08 Bi-Directional Filament Tape (Cross weave filament tape) Product Description RT-1C08 is coated by polyester film woven with cross fiberglass reinforcements with a pressure-sensitive hot melt adhesive. Balanced machine direction and cross direction tensile strength, high adhesion and medium impact strength. Bi-directional filaments provide resistance to delamination for improved one piece removability and increased boardiness for automatic application. Main Application * Unitizing * Strapping * Bundling * Transport securing * Packaging and palletzing Construction *Backing:Polyester film*Adhesive:Pressure sensitive hot melt *Backing Color:Transparent*Reinforcement:Cross weaven glass yarn Typical Physical Properties Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Typical Physical Properties Total Thickness:0.16 mmASTM D-3652 Adhesion to Steel35 N/25mmASTM D-3330 Tensile strength:800 N/25mmASTM D-3759 Elongation at Break:3ï½?5%ASTM D-3759 Service Tem recommended-7 ~75 ( 20 ~167°F) Storage Conditions Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80 ) and 40~50% relative humidity are recommended. Rotate your stock.

Code RT-020 Test report Tape Single-sided Butyl Tape Carrier Non-carrier Items Standard Date Test Date "Holding Power (mins)" Top face 20 22 Bottom face 22 Heat resistance"80°C, 2 hours""No dripping, No chap No deformation""No dripping, No chap No deformation" Cold resistance -40°C No deformation No deformation "Peel adhesion to (N/mm)" waterproof roll 0.4 0.53 Cement mortar board 0.6 0.70 Steel plate 0.75 "Peel strength retention rate (%)" "Heat treatment 80°C, 168 hours" waterproof roll 80108 Cement mortar board 83 Steel plate 105 "Alkali / Saturated calcium hydroxide solution treatment 168 hours"waterproof roll 80-84 Cement mortar board 104 Steel plate 99 Soaking treatment (water) 168 hours "waterproof roll 80 97 Cement mortar board 114 Steel plate 89 Note Waterproof roll is EPDM Summary Date reach standard data, qualified product, Butyl Tape Butyl Tape also know as sealing butyl (sealant) tape, used as waterproofing material in constrcution, Automobile industry and so forth. Its performence wins lots of trusts from market. Rudder TapesButyl Tape quality equivalent to Japanese, Korean, and enter into markts contains the USA, Australia, Germany, Malaysia, Japan, Russia, India, Korea and so on locate across the 5 continents. We are quite flexible to make custom-made product, based on precise demand from every single customer. For example: thickness includes 0.6 mm, 0.8 mm, 1.0 mm, 2.0 mm, 3.0 mm and so on. Glue color available: black, gray, white, etc. Learn more please click below 1) Single-sided Butyl Tape 2) Double-sided Butyl Tape without Carrier 3) Double-sided Butyl Tape with Carrier Rudder TapesWaterproof Tape coated with butyl rudder and aluminum foil or non-woven, release paper/film as liners. Features: Eco-friendly, non-toxic, Good viscosity (to a varity of surface), waterproof, Heat & Cold resistant, (Tem range (- 40~100 ) High tensile, Flexible, good enlogation, Corrasion,acid and alkali resistant Easy to handle. Application for review: Adhesive performs aggressive to metal, plastic, timber and even concrete floor & wall. Note: please clean subject surface ensure no dusty or sands before sticking. Applications pictures below for reference.

RT-105 Mono-directional Filament Tape Product Description "RT-105 is a heavy grade fiberglass reinforced biaxially-oriented polyester film tape with a aggressive solventless pressure sensitive hot melt adhesive. Exhibits Steady strength excellent adhesion to kraft cartons and bundling applications, etc." Main Application * Unitizing * Strapping * Packaging * Transport securing, * Bundling and palletzing, etc Construction *Backing:Polyester film*Adhesive:Pressure sensitive hot melt *Backing Color:Clear *Reinforcement:Mono-directional continuous glass yarn Typical Physical Properties Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Typical Physical Properties Total Thickness:"0.18 mm "ASTM D-3652 Adhesion to Steel: 30 N / inchASTM D-3330 Tensile strength: 1,700 N/cm ASTM D-3759 Elongation at Break:3~5%ASTM D-3759 Service Tem recommended:-7 ~75 ( 20 ~167°F) Storage Conditions Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80 ) and 40~50% relative humidity are recommended. Rotate your stock.