NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the worldâ??s best reserves in India. Talc is the worldâ??s softest and most hydrophobic mineral â?? insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications .under brand name â??NANOTALâ?? having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. NANOTAL also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. Itâ??s us use in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
We offer to the customers Talc Powder, also known as Soapstone, is a hydrous of Magnesium Silicate. Our Talc Powder is processed using latest techniques. It also undergoes stringent checking to ensure its quality. We deliver Talc Powder in safe packaging like plastic bags and also in customized packing materials. Avail from us high quality Talc Powder at cost-effective rates. Attributes Pearly lustre Has lamellar structure Highly oil absorbent Low specific gravity Easily dispersed Resistant to thermal shocks Applications Used to give smoothness and whiteness to paper Ideal partial replacement of Titanium Dioxide Suitable as a pitch absorber Provides good sanding, bending and holding properties to paints Suitable for improving drying pressing resistance of ceramics Used to lend superior electrical properties and toughness to switch boards and spark plugs Utilized in foundry for molding Used as a filler in plastics, asbestos products and polishes Suitable to be used as finishing of certain textiles Demanded by plastic industries to be used as filler and dusting agent
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 3000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.00 microns and Top Cut D-97 : 5.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 530 is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 1000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 2.50 microns and Top Cut D-97 : 9.50 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 2000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.80 microns and Top Cut D-97 : 7.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
Purest, brightest and Lamellar talc (Hydrated Magnesium Silicate) from particle size 75 to 2 micron (D98) for application into PP Compounding, Engineering Plastic, masterbatches, Cosmetics, Paper, Paints, Agriculture, Rubber, Ceramic, Pharmaceutical & Water Proofing.
We have food grade talc/soapstone available in 200-1500 mesh size at the best possible prices fob Karachi
HTMC Group is a leading manufacturer of talc powder in India, renowned for its high quality products and exceptional customer service. We specialize in manufacturing premium grade talc powder for various industries including cosmetics, pharmaceuticals, paints, plastics and others. Our state-of-the-art manufacturing facilities and stringent quality control measures ensure that our talc powder meets the highest industry standards. Trust HTMC Group for reliable and efficient solutions tailored to your specific needs. Choose us for superior quality talc powder that enhances the performance and attractiveness of your products.
Pakistani talc powder is a high-purity, finely milled mineral with a smooth, soft texture, ideal for applications in cosmetics, pharmaceuticals, ceramics, paints, and plastics. Sourced from quality deposits in Pakistan, this talc powder boasts 95-99% purity, high whiteness, and excellent absorbency, making it suitable for industries that require top-grade ingredients. Known for its chemical inertness and natural smoothness, Pakistani talc powder provides a versatile, safe, and high-performance solution that meets international quality standards.
Pakistani talc mineral is a premium, naturally occurring Magnesium Silicate known for its high purity, softness, and smooth texture. With a purity level of 95-99%, it is ideal for applications in cosmetics, pharmaceuticals, ceramics, paints, and plastics. Extracted from rich deposits in Pakistan, this talc is prized for its high whiteness, low impurities, and excellent absorbency, making it versatile and safe for both industrial and personal care uses. Pakistani talc offers industries a top-quality mineral solution, meeting stringent global standards for purity and performance.
WHITENESS : 92% +/-2 SILICA SiO2 : 50 - 52% MAGNESIA MgO : 26 - 28% ALUMINA AI2O3 : 0.50 - 1.50% IRON Fe2O3 : 0.5 - 0.8% CALCIUM OXIDE CaO : 8 - 10% LOSS ON IGNITION : 10 - 12% BULK DENSITY (gm/ml) : 0.45 - 0.55% Ph : 8-9 MOISTURE : 0.4 - 0.6% SPECIFIC GRAVITY : 2.7 - 2.8% RETENTION ON 500 MESH : 1.0%
