We have food grade talc/soapstone available in 200-1500 mesh size at the best possible prices fob Karachi
Talc/ Soapstone -lumps & Fine Talc (Soap Stone ) whitness 85% to 98% lumps & fine powder export quality Talc is used in many industries, including paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, and ceramics. A coarse grayish-green high-talc rock is soapstone or steatite, used for stoves, sinks, electrical switchboards, etc.
As the name suggests DoloTalc is another form of Mineral which is mined from Soapstone Quarries and commonly referred as Bhuria in local parlance It is basically a blend of Talc and Dolomite in a rock It is available in many different Grades and Whiteness Apart from the naturally available DoloTalc Mineral we have indigenously developed various Grades with custom made blend of Talc and dolomite through our own self designed processing technique The resulting DoloTalc is white in color and possess a perfect blend of characteristics of both Talc and Dolomite Manufacturing process of Wall Putty requires ingredients which are rich in lime CaCO3 and also have high oil absorption capacity This requirement makes DoloTalc an ideal contender because of limerich Dolomite and oilabsorbing Talc in its composition This Grade has found wide acceptance in Paints Wall Putty Soap and Detergents Ceramics Glass and Plastic industries Physical Properties Brightness : 85 98 Whiteness : 87 99 Specific Gravity : 275 Moisture : 010 Max Bulk Density : 040 070 Depending on the Particle Size Oil Absorption : 19 23 Depending on the Particle Size LOI : 5 50 Chemical Properties CaO : 25 25 MgO : 20 29 Al2O3 : 050 Max Fe2O3 : 050 Max SiO2 : 10 55 Particle Size D97 : 30 10 D50 : 7 3
Soapstone powder is also written as H2Mg3(SiO3)4 or Magnesium Silicate, which corresponds to 4.8% H2O; 31.7% MgO and 63.5% SiO2. In pulverized form it is whiter in appearance. The compact variety of soapstone powder is called steatite or soapstone. The word soapstone powder has been named probably due to its soapy feel. French-chalk is the trade name of pulverized soapstone powder of pure white quality which forms the base for many cosmetics and toilet preparations. Talcum powder is valued for its extreme softness, smoothness, high lubricating and hiding power and ability to absorb oil and grease. It is chemically inert to Acids and Alkalies. It has been found to be an excellent filler. It can withstand temperatures up to 1300�ºC. It has low electrical and thermal conductivity. Above all it can be easily powdered, cut and sawn into any shape and size. These properties in Talc are of extreme value for various industrial applications. We offer high-quality Talc Powder that is a metamorphic hydrated magnesium silicate with a soapy feel and pearly luster. Its lamellar structure and the platy ness give excellent results to the products. Composites filled with Talc enhance the performance properties of the compound. It exhibits higher stiffness, creepsâ?? resistance at both ambient and elevated temperatures. It has a greasy feel. Hydrous Magnesium Silicate Powder is the basic raw material for PP, LD, HDPE compounding, paints industries, paper industries, Rubber, Pharmaceutical Industry, PVC, Cosmetic, Baby Talc powders, and many more. Talc is used in many industries such as Papermaking, Plastics, Paint and Coatings, Rubber, Food, Electric Cable, Pharmaceuticals, Cosmetics, Ceramics, etc. Talc finds use as a cosmetic (Talcum Powder), as a lubricant, and as a filler in paper manufacture.
Talc food grade and pharma grade available for sale
Supplier: Food grade talc for confectionery, talc ip, bp, ultra fine talc for automobiles, talc, soapstone, steatite for plastics and paint, calcium carbonate powder for food, confectionery and ultra fine calcite powder, dolomite powder, china clay powder, quartz lumps and powder, silica sand, river sand and mica
Buyer: Barytes powder, calcined clay, food chemicals
Low grade PP talc flakes (black , mix color) use for making pallets , planting pot , injection molding or mixing process etc. We can provide 100 tons + per month Price : as Agreement Quantity : as Agreement
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL is a high purity mineral composed of hydrated magnesium silicate originating with exceptional high brightness from the world best reserves in India. Talc is the world softest and most hydrophobic mineral insoluble and inert. It adds new features to products and makes processes more efficient. The performance of TALC products depends on its particle shape (aspect ratio) and particle size distribution. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, scrub property, gloss, non-yellowing property, corrosion and coverage. Ultrafine NANOTAL provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. AR Talc also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
