PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene . Unique feature as it can adhere the styrofoam material Strong grab on contact with higher green strength Excellent water resistance as it immersed in water for 3 months without adhesion failure. Very Low odor without toluene and MEK
Description CS-264 is the latest innovative Contact adhesive using our home-grown technology. This is the only Contact adhesives with 50% solid. It's cost effective with the highest active ingredients. Less solvent less health hazard. CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene. Features Faster sticking Contact Adhesive within 5 minute. Strong grab on contact with higher green strength. Paintable when dried. Easy to extrude even at -15 C , most suitable for all season. Very Low odour without toluene.
Descriptiion CS-500 is a sealant mainly made by specialized rubber polymer, compatible with surface of various materials. Especially suitable for architectural expansion joint and crack repairing applications. Use 1.Used for sealing joints in applications such as curtainwall joints, metal panel joining,bedding thresholds,secondary glazing seals. 2.Standing seam roofs, side walls, gutters and downspouts sealing. 3.Filling and caulking joints in heating and air conditioning ducts. 4.Joint sealing in sheet metal. Feature 1.Excellent thixotropy,non-sagging during vertical application. 2.Good durability and flexibility. 3.Compatible with various kinds of paint. Color grey Packaging 300ml cartridge
DESCRIPTION CC-301(54) is 1 K aromatic moisture curing PU adhesives, it can be used as a waterproof primer for cement. CC-301(54) has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing. (about 3 days. ) TECHNICAL DATA Appearance : light yellow transparent liquid Component PU : pre-polymer Viscosity : 700-900 cps Solid Content : 100% Shelf Time : 6 months OPERATION 1. Put CC 301(54) onto the cement, then used a roller to coat on the cement. 2. After first coating has already tack free (about 1 hour), the second coating can be applied immediately. 3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
Product Description Oxidized bitumen is high quality, general purpose oxidized bitumen for various applications. Uses Foundation damp-proofing Built-up roofing systems. Roll and pour application of bitumen felts. Bonding of SBS modified membranes by hot mop method. Sealing of laps and joints of various bituminous felts and membranes. Wet area waterproofing. Bonding of wooden boardsâ?? insulation panels. Road resurfacing and repair. Application Heat the drum until the oxidized bitumen starts melting at approximately 130Deg.C. Apply by roller. Squeegee or direct rolling to an average rate of 1Kg/sq.m. For hot mop application. The membrane should be applied while pouring to avoid re-cooling. Packing In steel drum(180KGS) In SEALEDBAGS(25KGS/40KGS)
Description OP-908 is solvent-based bituminous asphalt for cold application based on oxidized bitumen, inert fillers and additives. Application OP-908 is conceived for cold bonding of polymer bitumen membranes with finish of the lower face with sand or with mineral. It is also can be the bonding of waterproofing membranes to the vertical connections,exhaust outlets, skylights and aerators.
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
Description CS-266 is solvent-free moisture curing PU adhesive. CS-266 temperature for foam or plastic, and products have properties as mentioned below : 1. Great curing speed. 2. Great bonding strength. 3. Great hydrolysis resistance. 4. Great weather resistance. 5. Great chemical resistance. Operation 1. CS-266 can be used by roller or knife coating. 2. After coating on the foamâ??s surface, then lamination stick with rollers. 3. Pressing the foam/foam at room temperature about 180 mins approximately, and initial binding strength can be obtained.
Introduction Bentonite Mat are consisting of three different layers supported by geotextiles and/or geomembranes, mechanically held together by needling, stitching, or chemical adhesives. A Bentonite Mat construction would consist of two layers of Bentonite Mat stitched together enclosing a layer of natural or processed sodium bentonite. The engineering function of a Bentonite Mat is containment as a hydraulic barrier to water, leachate or other liquids and sometimes gases. Typical Applications Includes Ponds and stormwater impoundments: Bentonite Mat are widely implied in sewage reservoir, storage ponds, and regular reservoir. The Bentonite Mat does not require specialized machine nor skilled workers, which makes it a great material for ecological pool protection. Landfill liner : Bentonite Mat can replace the clay layer of geosynthetic membrane compound system, offering less systematic leakage rate. For a better result,combining with geosynthetic membrane is recommended. By doing so, when the geomembrane is compromised, the Bentonite Mat can still work for its purpose. Anti-leakage of gas or oil depot:Due to the ease of application and great toughness, it is the most economic and reliable choice of leakage protection for oil or gas depot. Landfill cap: Using the Bentonite Mat are widely adopted in different countries, for the damage and crack effect of uneven subsidence, desiccations, and dampness are drastically less than ordinary clay layer. Hence, the Bentonite Mat are extraordinary suitable for landfill cap. Underground project waterproofing: The protruding thin fibers of Bentonite Mat surface can lodge in concrete and served as an anchor. When the subsidence occurs, the small anchors would prevent the Bentonite Mat and structure from forming a water intrusion interface.
PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
DESCRIPTION AFTEK PU 25 is a one component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a tough and flexible seal joint with excellent movement performance. AFTEK PU25 performs excellent adhesion on most building materials with proven weather resistance against UV, Ozone etc. APPLICATIONS Precast façade unit sealing Light weight cladding panel Construction expansion joint Window, door flame perimeter joint Natural stone joint sealing Ceramic joint sealing Various building material joint sealing, ie. fiber glass, rigid plastic, etc FEATURES One component, ready to use High movement accommodation +/- 25% Can be over paint Non toxic, sag, staining One component ready to use Excellent weather resistance Prime less for most substrates
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
Our company has a mining site and production lines located in taiwan that can offer a long-term supply of high-quality silica (sio2). Will send you our business introductory upon contact, along with sgs reports and our mine status. Would like to know more details about your buying quantity, pricing, and delivery timelines. Welcome to contact us with business inquiries, we are delighted to serve worldwide partners!
Description CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. Itâ??s easy to mix even by hand due to our innovative water-based technology. Features / Benefits *Paintable easily with water-based coating; can be painted after 1 day without work delay hence reduce time and save money. * Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens. * Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling. * Stronger adhesion due to higher amount of binders used. * High solid by volume; 100% water resistant when cured. * Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.
Allow you to mount small lights and accessories from walls, floors, doors, ceilings, windows, mirrors or any other smooth surfaces where no other mount can work! Available material Nbr Hnbr Epdm Silicone Viton/fkm Neoprene(cr) Sbr Nr *available for rohs/reach compliant *for other specified materials, please ask for recommendation Tooling/production 100% custom molded Please send us drawings (prints) for tooling purpose. Please advise material requirements (astm callout) Initial samples will need to be approved prior mass production To be produced as per sample approval Isir, ppap level iii available Founded in 1973, techken industrial co., ltd. Is a taiwan-based professional manufacturer. Our 2 factory is located in thailand, there are occupies over 25, 000 square feet and more than 600 employees, including strong r&d team, qc, qa, and completed production lines. Also, we are ts16949 & nsf61 certified manufacturer specializing in kinds of rubber parts. We are committed to offer excellent product quality and competitive price to help our customerâ??s increase the competitiveness of enterprises!
Available material Nbr Hnbr Epdm Silicone Viton/fkm Neoprene(cr) Sbr Nr *available for rohs/reach compliant *for other specified materials, please ask for recommendation Tooling/production *existing tools for as568, metric & jis b 2240 standard sizes (tolerance according to standard specs.) *non-standard sizes are acceptable but need to build tooling(s) (tolerances according to specified or/and discussed) *please advise material requirements (astm callout) *isir, ppap level iii available Founded in 1973, techken industrial co., ltd. Is a taiwan-based professional manufacturer. Our 2 factory is located in thailand, there are occupies over 25, 000 square feet and more than 600 employees, including strong r&d team, qc, qa, and completed production lines. Also, we are ts16949 & nsf61 certified manufacturer specializing in kinds of rubber parts. We are committed to offer excellent product quality and competitive price to help our customerâ??s increase the competitiveness of enterprises! *we have iso/ts16949:2009 and nsf61 certified. *our materials have ul/wrc/nsf/fda approved, and available for rohs/reach compliant. *main product: various rubber parts--seals, gaskets, grommets, o-rings, bushings, diaphragms, rubber bundle metal.
Seals Gaskets, grommets, washers and various molded seals Available material Nbr Hnbr Epdm Silicone Viton/fkm Neoprene(cr) Sbr Nr *available for rohs/reach compliant *for other specified materials, please ask for recommendation *we have iso/ts16949:2009 and nsf61 certified. *our materials have ul/wrc/nsf/fda approved, and available for rohs/reach compliant. *main product: various rubber parts--seals, gaskets, grommets, o-rings, bushings, diaphrams, rubber bondle metal. ^tooling/production .100% custom molded .Please send us drawings (prints) for tooling purpose. .Please advise material requirements (astm callout) .Initial samples will need to be approved prior mass production .To be produced as per sample approval .Isir, ppap level iii available
Digital signage and HDMI extender, HDMI/DVI over IP extender, KVM extender and CAT5 KVM switches, audio & video distribution system.