With 2-color printing device, auto-stop function, accurate automatic counting, print, filling and packing are done at one time, packing speed can be adjusted freely. G.W.: 600kgs, packing size: 74" x 46" x 69".
Positive-working offset plate with electrochemically grained anodized base light blue-green colored diazoic coating. Excellent quality light aluminum base. Unsurpassed technology matt surface treatment to improve film contact. Perform well on press and deliver excellent dot reproduction, with both AM/FM screening capabilities. Wide dampening latitude and good resistance to most pressroom. Excellent dot reproduction, water/ink balance and high printing quality. Aluminum: Thickness: 0.15 , 0.20 , 0.25 , 0.30 , 0.40 (mm) Maximum width: 1280mm Surface treatment: Electrochemical graining & anodizing Exposure: Light Source: Metal halogen lamp , ultraviolet light Exposure energy: 80 ( mj/c ) Dot reproductive range: 1~99 ( % ) ( at 200lpi ) Wavelength peak output: 360~420 ( nm ) (Peak : 405m) Vacuum contact larger: Micro Particles Recommended tonal wedge: UGRA Minimum clear step 2~3 Recommended micron lines: UGRA 8~10um Resolution power microlines200 LPI Print-out: Blackish blue to olive green Processing: Developer: MAX-6 Developer dilution: 1:6 (water) (ml) Processing temperature: 25í+ 2 (C) Processing time: 20~40 (secs) Replenishment Rate: 50~60 Photosensitive layer color: blue-green Working environment: Daylight Press room: Run length (Normal status) Unbaked: 200000 impressions Baked: above 1000000 impressions Static: 5~10 minutes at 200¬.
Artyong thermal 830 ctp, the advanced thermal ctp plate with great compatibility is specially designed for making plates in various platesetters, suitable for newspaper and commercial printing. Together with the great compatibilities, there are friendly plate-making, faster adaptations and more chemical alternatives. It will truly save your operation time as well as your plate cost. Artyong thermal 830 ctp, it needs less adjustment than the other thermal ctp plates that you are using now. By checking few factors and adjusting the linearity, you can use the artyong thermal 830 ctp with your existing systems freely. If you are tired of dealing with the sole supplier on pricing, service or stock issues, or you are not satisfied of being constrained by the vendors bundling strategy, why don't you just replace them by an advanced new plate? artyoong thermal 830 ctp will not only bring you freedom but also push you to move forward faster than ever. Artyong thermal 830 ctp, the new technology applied to the artyong thermal 830 ctp will generate the fine resolution as well as the good reproduction through various plate-setters. Moreover, the great cost-saving by using artyong thermal 830 ctp will advance you more room to compete against other competitors in both quality and pricing. You will enjoy the new experience...Gain more, pay less! Aluminum Thickness:0.15 , 0.20 , 0.25 , 0.30 , 0.40 (mm)( 0.20 & 0.40 only for quantity orders) Exposure Light source: infrared diode laser Exposure energy: 100 ~ 120( mj/c ) Dot reproductive range: 1~99 ( % ) ( at 450lpi ) Wavelength peak output: 800~850 ( nm ) (peak : 830m) Processing Developer: max dp-2 Replenisher: max dp-2r Processing temperature: 24í= 1 () Processing time: 30 (secs) Replenishment rate: 90 ( ml/ ) Working environment: daylight Press room Run length (normal status) baking condition Unbaked: 150000 impressions Baked: above 1000000 impressions Static: 5 minutes at 240
Consistent performance: A combination of state of the art production technology and strict quality control procedures throughout the production process combine to provide out customers with stable and repeatable performance guaranteeing superior finished results. Fast imaging: Fast exposure to maximize the output of CTcP devices and increase efficiency. Precise dot reproduction: Excellent performance in linearity of dot recovery. The dot proportion tolerance is less than 1% without calibration providing perfect image colout reproduction. Performance: Because of the unique device and artwork, the wide-range adaptability of UpLux can always be kept for PS; besides, the efficiency and tolerance prevail. Aluminum Thickness: 0.15 , 0.20 , 0.25 , 0.30 , 0.40 (mm) ( 0.20 & 0.40 only for quantity orders) Exposure Light Source: UV Light Exposure energy: 50 ( mj/c) Dot reproductive range: 1~99 ( % ) ( at 425lpi ) Wavelenght peak output: 360~420 ( nm ) (Peak : 405m) Prcessing Developer: UpLux DP-A Replenisher: UpLux DP-2A Processing temperature: 26í+ 1(C) Processing time: 30 (secs) Replenishment Rate: 50 ( ml/m^2 ) Working environment: Daylight Press room Run length (Normal status) Unbaked: 150000 impressions Baked: above 1000000 impressions Static: 5 minutes at 240(C)
Print sizes: 1220x2440 with UV curing.
Printing size: 1050x750 mm.
2/4/6/8/10 colors Closed chamber doctor blade system 40' hq
2/4/6/8/10 colors Closed chamber doctor blade system 40' hq
Presensitized plate JPC: high quality, high impression color printing JPN: high quality color printing in newspaper JPS: high quality fine printing JPF: high quality light printing
Rotogravure printing machine, Flexo printing machine, Laminating machine
3d flock heat transfer printing with iron on New products: 3d flock transfers with embroideries are our new devoloping products, it looks terrific luxury, more high solid feel & high value comparing nomal flock transfers, suitable for most of promotional clothing/ sports wear badging /headgear----decoration. Samples with customers' registered trademarks, logos and diagrams are for demonstration only and not available for sale
Solar Plus company would like to help the world fight against Coronavirus pandemic. We like to provide "NON thermal melting tape samples" for protective suit seam sealing. We understand there are material shortage in this Coronavirus crisis worldwide. For protective suit manufacturer willing to try out new tape for seam sealing, please feel free to contact us. We'll send out free sample for lab experiment. Hopefully we could make it through this tough time together. Yours sincerely Solar Plus company crew
Auto CPAP Machine Unit Pressure Range: 4-20cm H2O Pressure Accuracy: �±0.5 cm H2O * with humidifier & heater * with one PP tubing * with carry bag * without CPAP mask & SD card Made in Taiwan
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone release paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
1. Main applications are for protection,carrier use. 2. Provides enough holding adhesion during dicing operation at regular temperature, objects are not moved, nor flying. Easily released after heating. 3. Single sided or double sided. 4. Thermal release temperature: 95ºC,120ºC,150ºC,180ºC . 5. For:Wafer Dicing,Chip Dicing, MLCC Dicing,LED or Semiconductor Industry Wafer, Chip Dicing.
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone release paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
1.Used in masking operation during wave solder process on PCB, prevent electroplating liquid immersion and polluting. 2.Insulation and high heat dissipation. 3.High temperature fixing / holding. 4.Wiring in heater,power supply and flexible printed circuit board. 5.High temperature resistant,good insulation,Used in capacitor,solder mask, motor,wiring,wave solder. 6.Printable, for use in bicycle rim - tubeless system. 7.Optional with release liner, good for die cut into shape.
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
Description Self-adhesive membrane is high-strength PE based,combined with bitumen layers, forming rigid copolymer waterproofing sheets with high endurance. Use 1.Foundation and basement waterproofing 2.Flooring,roof deck waterproofing 3.Interior and exterior walls 4.Tunnels,reservoirs,sewage treatment tanks Feature 1.Easy apply, no torch equipment required 2.Self-adhesive,fast and easy application 3.Can combine with the structure as a whole, therefore prevent vapor transmission and expansion Series Product CP-107/Gravel,PE/Thickness : 2/3/4/5mm CP-108/Sandstone/Thickness : 2/3/4/5mm OP2100/PE/Thickness : 1.5mm XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm
Good quality washi tapes with variety designs and material: PP PVC paper washi
