1 Stage Water Purifier 1.Effective in removing dirt, rust and sand particles 2.Takes out the chlorine and organic chemicals 3.Enhanced reduction of taste, odor, and color 4.Improving water quality to enjoy better tasting water 1 Stage Water Purifier. Model No.:FHE-1100 1 Stage Water Purifier Type:1 stage 1st Stage:Pre-filter 5 Micron PP filter Flow Rate:Max. 3L/minute Filter Lifetime:6000L Dimension:12x10x36cm
3 Stage 10'' Water Purifier 1.3 stage RO water filter cartridge 2.10â??â?? water filter Cartridge 3.The prodact are have liability insurance 4.Remove particles 5.Micron Rating (Nominal): 5 Micron 6.Filter Media: Polypropylene 7.Replaced every 3-6 months depends on water quality 8.Change when color darkens or water flow slows 9.Filter Media: Activated Carbon 10.Replaced every 6-9 months depends on water quality 11.Filter Media: Polypropylene 12.Replaced every 9~12months depends on water quality 3 Stage 10'' Water Purifier Model No.:10''-3 3 Stage 10'' Water Purifier Type:3stage 1stage:Pre-filter 5 Micron PP filter 2stage:CTO Carbon Block Filter 3stage:Pre-filter 1 Micron PP filter
3 stage Water Purifier with Faucet 1.Effective in removing dirt, rust and sand particles 2.Takes out the chlorine and organic chemicals 3.Enhanced reduction of taste, odor, and color 4.Improving water quality to enjoy better tasting water 3 stage Water Purifier with Faucet Model No.:DB-1055 3 stage Water Purifier with Faucet Type:3 stages 1st Stage:Pre-filter 5 Micron PP filter 2st Stage:UDF carbon filter 3st Stage:Sediment 1 Micron PP filter Flow Rate:Max. 3L/minute Filter Lifetime:7500L Dimension:23x10x36cm
1.High-Concentration Hydrogen Water Generator (Made in Japan by Victory Japan) 2.Simple Hydrogen mode 3.Convenient Ozone mode 4.Portable design 5.All-in-one No need to install Model No.:HS-72 Cup Capacity:1800ml Hydrogen Content:~1.2ppm Redox Potential:~-480mV Power:110V~240V Power Consumption:~24W Size:width 316 x deep 160 x high 270 (mm) Weight:1800g
Item No:CFE014 Material: Stainless Wireã?�SEBS Size:9.7cm(W)*13.2cm(D)*17cm(H) Max Load:5KG Made in Taiwan Products Descriptions 1.High quality with reasonable price 2.#304 Stainless Steel, Itâ??s quiet strong and durable 3.Easy to take in the hair dryer 4.No nails, easy to install, washable and reusable 5.Advanced Production machine
CSA & UL listed Festoon Cable (CSA C22.2 NO 96-09) Size :4/0~16 AWG Core :3C~24C Conductor : Soft Bare Copper Insulation : PVC Jacket : PVC Rated Temperature : -40~105C Rated Voltage :600V Standard : UL, CSA Application : Cranes, hoists or any equipment which travels with lateral traversing motion. We are the sole UL & CSA listed Festoon cable Manufacturer in Asia. Feel free to contact me anytime for any inquiry, thank you!
3D Dream Workshop makes SLA 3D printers which can adapt to alter operating conditions, such as different temperature, humidity…etc. by adjusting laser energy. Also, users are able to control the hardness of models through adjusting laser energy and exposure time. Compatible with 3rd party materials All FunPlay Series are compatible with any resin from other manufacturers. All users have to do is to adjust laser energy and exposure time. Meet Opal – create your own colors Opal is the best solution for resin colors. We enabled users to create any color by mixing Opal and our resin.
Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome ---
**ic socket** Trade term & delivery?: (1)quotes are based on f.O.B taiwan port us$. (2)payment term: t/t in advance. (3)delivery: within 2~3 weeks after receipt of t/t(wire transfer). --- o.E.M./o.D.M orders are welcome --- All the wish products are 100% made in taiwan. **registered trademarks ** Please purchase genuine product. Counterfeiting not allowed.
Features: (1) Delicate printed coordinates for easy recognition and calculation. (2) Board body made by advanced POM material to avoid static electricity and frequency interference. (3) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive, can stand operation more than 10, 000 times. (5) Max. allowable voltage/current:48Volts/5Amps. (6) WBU-2xx Series is a valuable tool.No signal interference caused screen white dot. Suitable to design high level prototypes whether in R&D application or university laboratories.
Features: (1)Advanced POM material make the insertion hole is hardly deformed when sustaining continuous Insert and pull out. Static electricity and frequency interference is precluded also. (2) Round pin jacks help component's pin to insert and fit perfectly. Components plug-in and replacement is easy and convenient with good conductive. (3) A landscape arrangement for easy of assembly operation. Conform the work flow of PC board. (4) The power distribution strip provide 4 sections of anode for using different voltages at the same time. 45 junctions provided for negative circuit. (5) Delicate printed coordinates for easy recognition and calculation. (6) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive ensuring reliable connections, it can stand operation more than 10, 000 times. (7) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (8) Design of protrusion tail and latch groove keep the two adjacent boards mating together tightly(A perfect distance from one board to another). A V-shape cross section groove allows DIP IC to insert which increase the rate of utilization. (9)Max. allowable voltage/current:48Volts/5Amps. Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome --- ALL THE WISH PRODUCTS ARE 100% MADE IN TAIWAN. **REGISTERED TRADEMARKS ** PLEASE PURCHASE GENUINE PRODUCT. COUNTERFEITING NOT ALLOWED.
Features: (1) Coordinates molded in convex character. The operator can recognize and calculate easily. (2) Board body made by advanced POM material preclude static electricity and frequency interference. (3) Square insertion hole design with straight arrangement. The insertion hole is hardly deformed when sustaining continuous Insert and pull out. (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive ensuring reliable connections, it can stand operation more than 10, 000 times. (5) Durable aluminum base plate treated with a special coating to avoid static electricity. (6) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (7) Allowed more application of DIP IC pins insertion. The pin of DIP chips can be crossed without interfere with each other when proceeding test. (8) Max. allowable voltage/current:48Volts/5Amps. (9) Reliableconnection of Mini Self-Adhesive Round hole Breadboard ensure trustworthy of test and building small electronics design project. Multipack includes the basic needs and can be transferred to a circuit board quickly and easily. Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome --- ALL THE WISH PRODUCTS ARE 100% MADE IN TAIWAN. **REGISTERED TRADEMARKS ** PLEASE PURCHASE GENUINE PRODUCT. COUNTERFEITING NOT ALLOWED.
Trade term & delivery?: (1)quotes are based on f.O.B taiwan port us$. (2)payment term: t/t in advance. (3)delivery: within 2~3 weeks after receipt of t/t(wire transfer). --- o.E.M./o.D.M orders are welcome --- All the wish products are 100% made in taiwan. **registered trademarks ** Please purchase genuine product. Counterfeiting not allowed.
Specification of 2CP5 series pressure sensor (0.5~4.5Vsignal output) Pressure range!G 0-15psig ~ 0-650psig Performance!G Precision: !O 1.2% span (linearity, hysteresis, repeatability, and calibration). Temperature deviation!G!O0.013%FXC Operating temperature!G-40FXC to 135FXC Physical properties!G Pressure resistance!G5X15-75psi!F3X100-300psi!F2X500+psi!C Burst pressure!G2CP5 1500 psi (brass)!F2CP50 2500 psi (plated steel)!C Random vibration!G (50-2000 Hz)!G11g!C Cycle life!G10M F.S cycle!C Fall (in either axis)!G1.5m!C Electrical connection!GNema 4X, IP65!C Electrical characteristics!G Power voltage!G4.5 to 5.5 VDC!C Power current (Max@5.5Vdc no load)!G8 mA max!C Output load: 10K ohms typical. Overvoltage protection!G16 VDC!C Short-circuit protection!GYes!C EMC (10MHZ-512MHz)!G50 V/m The output voltage (Vout): 0.5 to 4.5 Vdc t typical. Output current (maximum decrease or source)!G2.5 mA!C Output response time!G10 mS!C Reverse voltage!G14 VDC!C EMC (512MHz-1GHz)!G25 V/m!C ESD (CDF-AEC-Q100-002)!G15k V!C
ACM Product Capability !¡¦ Based on TI ACM patent of active sensitivity skill, the sensor could detect 2 to 5 ppm CO concentration., which is the average CO concentration in the cities of western countries. Normally it is no necessary to detect low concentration of gas in cities. However it is expected to do so in the country sides. ACM would remind ECU the source of smell nearby. !¡¦ Based on TIACM patent of absolute concentration detect skill, 2 sensors separately exam the absolute concentration of NOx and CO. The advantage is to provide a report of air quality. It also applies to the condition when the gas exists longer time or increases its concentration, to even satisfy the demand of advanced loop circle control strategy. !¡¦ TI ACM favors customers to develop more advanced loop circle control strategy.
APT Key Features The sensor design is based on ceramic capacitor structure. All signal processing circuits are gathered together as one application-specific integrated circuit. Allowable for a wider temperature range (-40¢FXC to +135¢FXC ). Allowable pressure range is up to 3,000psi. Precise assembly process; no further adjustment is required after leaving factory. Absolute or relative pressure sensor. A reliable package type especially designed for engine and chassis installation. Accurate and stable output signal. Able to fit for all auto pressure liquids. Able to enhance the temperature output. APT Operation Principle
One ballast different lampa fluorescent or compact fluorescent lamps !E Reduction of inventory costs and flexible processes,since many ballasts that were suited for only one lamp,will no longer be many Automation identification of lamps !E All of these lamps are run optimally according to their specifications Warm start of lamp possible in every dimming position !E When switched on, the ballast will start the set light value without difficulty in every dimming position !E Especially for lighting systems in cinemas,theaters and concert halls this function is a major advantage Dimming range up to
Automatic identification of lamps All of these lamps are run optimally according to their specifications Warm start of lamps possible every dimming position When switched on, the ballast will stare the set light value without difficulty in every dimming position Especially for lighting systems in cinemas,theaters and concent halls this function is a major advantage Dimming range up to
Tem: water pitcher with cartridges unit: set (each set includes 1pc water pitcher and 3pcs cartridges) available color: green, white, black capacity: 3.5 liters material: as, abs, pp filter life: need to replace it per 2 months or 240 liters of water water temperature: around 1~40 degree c (around 34~104 degree f) advantage: - elegant and fashion design - soften water - reduce chlorine and heavy metals - restrain bacteria effectively - good taste - safe and economy - environmental friendly - available with sgs certificate Package: 1set/carton, n.W.: 1.5kgs, g.W.: 2.5kgs, meas.: 30 x 17 x 42 cm (around 0.023cbm)
JFMA - Box Type Metallized Polypropylene Film Capacitor For Capacitive Divider Specifications Operating Temperature -40 C +105 C JFMA-Box-Type -Metallized-Polypropylene-Film-Capacitor-For-Capacitive-Divider Rated Voltage 400V(230VAC) 630V(275VAC/305VAC/310VAC) Capacitance Range 0.0047 3.9F Capacitance Tolerance 5%, 10% Insulation Resistance C0.33 f ; IR 50000MOhm C 0.33 F ; IR 15000MOhm Dissipation Factor 0.1% max. at 1KHz, 20C Dielectric Strength 160% of rated voltage for 60 sec.
