Probe card - For IC,TFT-LCD cell testing
Special Features: 1.Displays the calories burnt. 2.Displays the number of turns. 3.Displays the amount of time used. 4.Instantly giving loops and timer of rotation during shaking by synthetic speech.
DIN Rail Industrial Powerline Ethernet BridgeMaster Brief introduction DIN Rail Industrial PLC Ethernet Bridge Master is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. Can be used in one phase or 3 phases ,The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc.. 1.1 Highlight 1.1.1 Technical parameters Support G.hn. Industrial DIN rail style installation Actual bandwidth up to 400Mbps The maximum transfer distance up to 1000 meters Self-adapt the rate Compatible with all G.hn devices One Domain Master can manage 15pcs End Point There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit 1.1.2 Manageability Support Remote Firmware update(TR069) 802.3D Ethernet Bridge 802.1Q VLAN Quality of Service(QoS) IGMO(IPv4)Snooping&MLD(IPv6)Snooping Support local web management 1.1.3Operating environment Working temperature: -40-80 Operating humidity: 10%-85% no condense Storage humidity:5%-90% no condense 1.1.4Design standards ITU-T G.9960 IEC 60529 IEC 50022 IEC 60068-2-6 MIL-STD-810G 1.2 Features Packet loss.1%?100M,load 70% Support 7*24 hours all weather operation hardware watch dog function PING2MS The quantity of the group 16pcs 1.3 Immunity of ESD The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
Compatible for any audio sources such as tv dvd/hi-fi player, computers, etc Ultra high frequency wireless headphone No limitation to the location of earphones within the effective range of the system No cable connection between transmitter and headphones is required as radio frequency signal can pass through wall, floor, ceiling or partitions Transmits 863mhz stereo signal up to 100 meter Unimited number of headphones of the same frequency can be used with this system 3 channels selection for better reception Auto power cut off the transmitter when there is no signal received Phase-locked loop (pll) technology
The transmitter transmit stereo signal in 86 mhz to wireless headphone in the scope of 20 meters with interference free. While the single headphone operating, it becomes fm radio receiver between 83.5-108mhz. Connect headphone to computer with attached cable as for net icq purpose. Inspecting the voice around transmitter in scope of 5 meter to receiver as an inspector. Specification: Transmits frequency: 86mhz Maximum transmit distance: 20m Inspecting scope: 5 m (around transmitter) Fm radio frequency: 83.5-108mhz 5Snr: >35db 6Sensitivity: >22uv Maximum output power: 0.5w
CPM-80 multifunction power analyzer is a competitive product for power monitoring with following key features: - High Accuracy: 0.2S - Ethernet communication (Modbus TCP/IP) - Swell/ Sag - Waveform Capture - 3.5'' TFT LCD Full color screen It provides high accuracy single phase and three-phase energy measuring and displaying, energy accumulating, power quality analysis, data logging and data communication. CPM-80 series multifunction power analyzer are able to measure bi-directional, four quadrants kWh and kVarh. It provides maximum/minimum records for power usage and power demand parameters. Hardware standard built in 1 RS485 Modbus communication port , 4 Digital inputs, 2 Relay outputs, LCM and 2MB flash for data-logging. In addition , also provide TOU , voltage and current THD, harmonics up to the 63rd and auto wiring change via software .
3.579545mhz~ 100mhz. 1000pcs, max. Weight: 1kpcs.
Silicon cz/mcz/fz/ntd substrate Dia : 2"~ 8" Dopant : arsenic, (red) phosphorus, antimony, boron. Orientation : , , Resistivity : 0.001~20, 000 ohm-cm
Modulator
Electronic check writer Detail: Power: as your local demand. (11ov,50hz/60hz) (220c, 50hz) This innovative check writer feature"zero-error typing" as it starts. It is added with "break-down can celing function." Power consumption: 1.5w (22w max) Up to 10 digit lcd display & width printed. Void check digit, and % for percentage calculating. Print displayed amount deeply embossing for forgery prevention on check. Patent applied. Black ink or red ink. Currency by your demand. (us$, nt$,....) Size: 118(w) x 114(h) x 245(d)mm Weight: 1.8kgs/set Cuft: 0.24"/set Packing: 6 sets/carton N.W./ctn: 10.8 kgs/ctn G.W./ctn:12.16kgs/ctn Cuft: 1.84"/ctn
Designed with advance uv detecting technology according to who standard Uv mode: displays uv index from 0 to 18 Adjustable skin tone setting: allows user to select skin type from 1 to 4 Adjustable spf setting: allows user to input spf protection level from 0 to 99 Exposure mode: after personal skin type & spf selection is made, sensor will Indicate How much sun exposure is acceptable Temperature mode: gives ambient temperature, °c / °f switchable Sunburn alarm: will alert user through beeping that reapplication of Sunscreen is Necessary Sporty design with 14cm strap in pink, blue, yellow, orange for selection, Easy to carry & use Low power cosuption: stand-by 10ua working 1ma Application: Good for skiing, water skiing, swimming sunbathing, camping, bicyling & outdoor activities
Super mini size: pen style design in compact size, easy to carry and use Dual display: lcd with show relative humidity and temperature simultaneously Fast response time: within 120~150 seconds & auto power off in 10 minutes Delta function: to tell plus or minus relative humidity from certain place Max and min mmory: to show the max and min humidity °c / °f switchable Measurement range: humidity: 20%to 95%, temperature: -20 to 60°c (-4 to 140°f) Application: professional-grade instruments fo hvacr, wine cellar greenhouse, warehouse, lab and so on
Quickly measure relative humidity, dew point and dry bulb temperatures Dual display: lcd with back light to show both relative humidity and temperature Fast response tie: within 60 seconds Apo function: auto power off in 10 minutes by manual setting Dew point Max/min/hold °c / °f switchable Measurement range: humidity: 10%to 95%, temperature: -20 to 60°c (-4 to 140°f) Pen type: easy to carry and use Application: professional-grade instruments for hvacr, wine cellar, greenhouse, warehouse, lab and so on
TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) * RF Cable : RG174, 2.7 ±0.3mm, Black * Cable Length : 5M ±5cm * RF Connector : SMA (M) * Frequency Range : 1575.42 �± 1.023MHz * Gain : At Zenith : Typ 35 dBi (cable loss) Note:1 mounted on the the 70mm*70m ground plane * Output Impedance : 50
* Frequency Range : 1575.42 +- 1.023 MHz * Gain : At 90 deg 14.5 +- 4dBi * Output Impedance : 50 * Operation Temperature : - 20 deg C to + 65 deg C * Storage Temperature : - 30 deg C to + 75 deg C * RF Coaxial Cable : 1.13 +- 0.1mm, L =60+/- 2 mm * RF Connector : I- PEX ( F ) * Patch Antenna size : 15 x 15 mm * Dimension: 15 x 15 x 7.2 mm
2.4GHz/5.8GHz WIFI Antenna Ct-W03 wireless antenna Specification * Frequency : 2400-2500/4900-5800 MHz * Antenna Type : Rectangle Patch antenna * Mounting : Double side tape * Antenna Gain : 2400-2500MHz 2 dBi / 4900-5800MHz 3dBi * VSWR : 1.7 * Power : 10 Watts * Impedance : 50 ohms * Polarization : Vertical * Antenna Connector : SMA PLUG RP (Option) * Cable Length : RG174 Length=3Meter (Option) * Dimensions : L132xW22.5xH7mm * Antenna Color : black
Frequency Range1575.42 ± 10 MHz. 1602 ± 8MHz Gain1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith Output Impedance50 Output VSWR2.0 Max RF CableRG174 , 2.7 �± 0.2mm , Black Cable Length1M/3M/5M �± 5cm RF Connector SMA 180 (M)
Features : This antenna is designed for LTE/GSM/UMTS/3G/WiFi wireless Specification * Operating Frequency : 700-960/1700-2700 MHz * Antenna Type : Rectangle Patch antenna * Mounting : Double-side tape * Gain : 1-3 dBi * VSWR : �?�¢?�?�¦1.9 * Power : 10 Watts * Impedance : 50 ohms * Polarization : Vertical * Antenna Connector : SMA PLUG (Option) * Cable Length : RG174 Length=3M * Dimensions : L132xW22.5xH7mm * Antenna color : Black
Features : Antenna, swivel with SMA(M)st.(Nickel), Black 746 & 824-960 & 1710-2170, 2300-2500 & 2700MHz Electrical Properties * Frequency Range : 699-960MHz VSWR : 3.5 Max Gain : 1.0 dBi * Frequency Range : 1710-2700MHz VSWR : 3.0 Max Gain : 2.5 dBi * Impedance : 50 * Radiation : Omni Mechanical Properties * Antenna Cover : ABS * Tube Color : Black * Operating Temperature : -20 deg C~+65 deg C * Connector Type : SMA(A) Plug * Cable Type : RG178 Cable
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40 to + 85 - Storage Temperature : -40 to + 85 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5 ) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
