Mx-1004vw is a high-performance with seamless switching output and mixed input 4x4 matrix switcher, 4 mixed input to support digital video signals and analog video signal, and 4 outputs with seamless switching function, seamless switching mode: fast switching, fade in/fade out, blinds and so on. The mixing matrix switcher adopts the advanced digital technology, with scaler function, and achieves a variety of formats to achieve a unified output signal, switching seamlessly perfect visual effects. At the same time it with infrared matrix function, analog video signal input with embedded audio function. Flexible control mode can be operated through the front panel button, remote control, and rs-232 and tcp/ip control.
16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional) * Fully photo-isolation 3750Vrms * Wide supply voltages (10~30V)
EDAM-9050 12 DI and 6 DO channels Digital I/O Module * Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP * Ethernet 10/100 Based-T Communication * Support 6 Isolated digital output channels (NPN). * Provide Pulsed/delay Output Mode * Support 12 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry Contact Inputs * Fully Photo-Isolation 3750Vrms * Status LED indicator
The SIM7600CE is Multi-Band LTE-TDD/LTE-FDD/HSPA+/TD-SCDMA/EVDO and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT4up to 150Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,GPIOetc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module providesmuch flexibility and ease of integration for customer's application. General features * Quad-Band TDD-LTE B38/B39/B40/B41 * Tri-Band FDD-LTE B1/B3/B8 * Dual-Band TD-SCDMA B34/B39 * Dual-Band UMTS/HSDPA/HSPA+ B1/B8 * CDMA 1X/EVDO BC0 * GSM/GPRS/EDGE900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V * Operation temperature: -40�¢??to +85�¢?? * Dimension: 50.80*31*5.35mm * Weight: 5.5g * GNSS gpsOneGen 8B;standalone;assisted,XTRA; Specifications for Data transfer * LTE CAT4-Uplink up to 50Mbps, -Downlink up to 150Mbps * TD-SCDMA-Uplink up to 128Kbps, -Downlink up to 384Kbps * TD-HSDPA/HSUPA -Uplink up to 2.2 Mbps, -Downlink up to 2.8 Mbps * HSPA+ -Uplink up to 5.76Mbps, -Downlink up to 42 Mbps * UMTS-Uplink/Downlink up to 384Kbps * EDGE Class-Uplink/Downlink up to 236.8Kbps * GPRS -Uplink/Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/Windows CE/Mobile * Automatic installationfor windows * Linux API SDK * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS * DTMF * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * SPI * I2C * Constant current sink * GPIO * ADC * PCM * SDIO
The SIM7500SA is Multi-Band LTE-FDD/HSPA module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application. General features * FDD-LTE B1/B3/B5/B7/B8/B28 * Dual-Band UMTS/HSDPA/HSPA+ B1/B5 * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V * Operation temperature: -40�¢?? to +85�¢?? * Dimension: 24*27*2.75mm * Weight: 4.0g Specifications for Data transfer * LTE CAT1 - Uplink up to 5Mbps, - Downlink up to 10Mbps * HSPA+ - Uplink up to 5.76 Mbps, - Downlink up to 42 Mbps * WCDMA - Uplink/Downlink up to 384Kbps * CSD - WCDMA data rate 57.6Kbps - WCDMA 64kbps CSD for Video call Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/Windows CE/Mobile * Automatic installation for windows * Linux API SDK * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS * DTMF * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * I2C * GPIO * ADC * PCM
Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel
Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR
Features - Compliant with SFP+ MSA - Compliant with SFP MSA (INF-8074i) - Support for multi-gigabit data rates up to 10.5Gbps - Support for 1x, 2x, 4x and 8x Fiber Channel data rates - Hot Pluggable SFP 20PIN footprint - Serial ID module on MOD(0-2) - AC coupling of PECL signals - EMI/EMC performance - Low Power consumption
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-LW/LR - 1310nm DFB transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-SW/SR - 850nm VCSEL transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes - Inter Rack Connection
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - Hot pluggable QSFP28 MSA form factor - Compliant to IEEE 802.3ba 100GBASE-LR4 - Supports 103.1Gb/s aggregate bit rate - Up to 10km reach for G.652 SMF - Single +3.3V power supply - Operating case temperature: 0~70â?? - Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) - Receiver: 4x25Gb/s PIN ROSA - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 4.0W - Duplex LC receptacle - RoHS-6 compliant Applications - 100GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Datacenter and Enterprise networking
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
The SIM7000C is Multi-Band LTE-TDD/LTE-FDD and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT M1(eMTC) and NB-IoT up to 375kbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. the module provides much flexibility and ease of integration for customer's application. The biggest advantage of the product is low power consumption. General features * Single-Band TDD-LTE B39 * Three-Band FDD-LTE B3/B5/B8 * GSM/GPRS/EDGE 900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V, Typ:3.8V * Operation temperature: -40â?? to +85â?? * Dimension: 24*24*2.6 mm * Weight: 3.0g * GNSS Specifications for Data transfer * LTE CAT M1 - Uplink up to 375kbps, - Downlink up to 375kbps * NB-IoT - Uplink up to 72kbps, - Downlink up to 32kbps * EDGE Class - Max. 236.8Kbps(DL/UL) * GPRS - Max. 85.6Kbps(DL/UL) Other features * USB Driver for Microsoft Windows2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/WindowsCE/Mobile * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * DTMF* * Gobi SDK to the Win7/Win8/Linux * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * GPIO * ADC * PCM*
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features * Tri-Band FDD-LTE B3/B8/B20 * GPRS/EDGE 900/1800Mhz * Output power - GSM900: 2W - DCS1800: 1W * Control Via AT Commands * Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V * Operation temperature: -40â?? to +85â?? * Dimensions: 24 X 24 X 2.6mm * Weight: 3.0g * GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer * LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps * NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps * EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps * GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows XP/Vista/7/8 * USB Driver for Windows CE/Mobile * USB Driver for Linux/Android * Firmware update via USB * TCP/IP * PPP * SMS * EMAIL * FTP/HTTP/SSL * VoLTE* * FOTA* Interfaces * USB2.0 x1 (high-speed) * UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) * SIM card x1 (1.8V and 3V) * I2C x1 * GPIO x5 * ADC x1 Consumption * Power off: 7uA * PSM: 9uA * Sleep: 1mA * Idle: 11mA
4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network. On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network. 4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc. General features: EDGE multi-slot class 33 GPRS multi-slot class 33 Compliant to GSM phase 2/2+ Output power: - Class 3 (0.25W) for LTE/UMTS - Class 4 (2 W) for GSM 900 - Class 1 (1 W) for GSM 1800 Control via AT commands (3GPP TS27.005/3GPP TS27.007 ) Supply voltage range 3.3V- 4.2V Low Power consumption - Sleep mode: 3mA - Power down: 16 �¼A Dimensions: 51.0�?30.0�?4.6mm Operation Temperature: -40�°C to +85�°C MSL : 3 Band Configuration LTE-FDD Band 1/3/5/7/8/20/28 LTE-TDD Band 38/40 UMTS Band 1/5/8 GSM Band 3/8 Specifications for GNSS GPS frequency: 1575.42MHz At least support 44 channels Sensitivity - Acquisition: -158dBm - Tracking: -162dBm TTFF - Cold Start: 28s - Warm Start: 18s - Hot Start: 1s Specifications for data Support Release 11 Category 4 LTE-FDD up to 150 Mbps DL,50 Mbps UL LTE-TDD up to 130 Mbps DL,35 Mbps UL DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL EDGE class 33: 296Kbps DL,236.8Kbps UL GPRS class 33: 107kbps DL,85.6kbps UL CSD up to 14.4 kbps Non transparent mode PBCCH support PPP-stack Coding schemes CS 1,2,3,4 FOTA TCP/IP NDIS Specifications for SMS Point-to-point Mo and MT SMS cell broadcast Text and PDU mode Protocols TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/ SMTP*/ SMTPS*/ MMS/ FTPS*/ NTP/ PING/ QMI/ SSL/ NITZ/ CMUX/ MQTT* Additional features VoLTE Phone book PCM DTMF Interfaces: RF connector PCI Express�® Mini Card Interface - Power supply - USB 2.0 high speed - UICC/SIM/UIM card interface 3V, 1.8V - UART - Analog Audio - PCM Antenna connector SIM Card Holder Approvals: RoHS / CE / GCF / RCM / NCC
