Item: Sawing wire for multi-wire sawing Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available INTRODUCTION:Hengxing Cutting Ceramic and SiliconHigh Strength Ultra Fine Diamond Cutting Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology INTRODUCTION:115UM/120UM/ 0.16mm Silicon Wafer Cutting Ultra Fine Sawing Auto Glass Cut Out Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Henan Hengxing Science&Technology Co.,Ltd was founded in 1995 which is a large-scale key enterprises in Henan province, National Torch Technology enterprise which focus on high-tech, Chinas largest manufacturer of saw wire,galvanized steel wire, steel strand, the biggest radial tire with cord manufacturer in Henan province, the domestic A-share listed company with stock code of 002132. It has two wholly owned subsidiaries and 3 subsidiaries, the existing staff of more than 2200 people. Company's total assets of 3.3 billion yuan with sales income of 1.95 billion yuan and tax of 150 million yuan during the year of 2012. Ultra fine wire is high carbon, cold drawing of brass plated of high strength steel wire, it can be used for cutting high hardness of monocrystalline silicon, polycrystalline silicon and quartz material etc. Henan Hengxing Science&Technology Co.,Ltd can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size h wheel.
Item: Sawing wire for multi-wire sawing Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.
Advantage of Sawing Wire for Solar Wafer Cutiing Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Sawing wire for multi sawing solar wfter cutting Item: Sawing wire for multi-wire sawing Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 wire Other Name: Solar Wafer Cutting wire Silicon Cutting Sawing Wire Diameter:65um-350um available
Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology
Steel Cord for Radial Tire 3*7*0.2HE Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safetyLower costs, lower weight and higher fuel savings Steel Cord for Radial Tire 3*7*0.2HE Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord.
Steel Cord for Radial Tire 3*4*0.22HE Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings. 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Steel Cord for Radial Tire 3*0.2+6*0.35HT Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings Steel Cord for Radial Tire 3*0.2+6*0.35HT Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings.
Steel Cord for Radial Tire 0.25+6+12*0.225HT Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings Steel Cord for Radial Tire 0.25+6+12*0.225HT INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Steel Cord for Radial Tire 3+9+15*0.22+0.15HT Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings. 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings. Steel Cord for Radial Tire 0.25+6+12*0.225HT INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Henan Hengxing Science&Technology Co.,Ltd was founded in 1995 which is a large-scale key enterprises in Henan province, National Torch Technology enterprise which focus on high-tech, Chinas largest manufacturer of saw wire,galvanized steel wire, steel strand, the biggest radial tire with cord manufacturer in Henan province, the domestic A-share listed company with stock code of 002132. It has two wholly owned subsidiaries and 3 subsidiaries, the existing staff of more than 2200 people. Company's total assets of 3.3 billion yuan with sales income of 1.95 billion yuan and tax of 150 million yuan during the year of 2012. Ultra fine wire is high carbon, cold drawing of brass plated of high strength steel wire, it can be used for cutting high hardness of monocrystalline silicon, polycrystalline silicon and quartz material etc. Henan Hengxing Science&Technology Co.,Ltd can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size h wheel
Brass coated steel sawing wire for cutting glass with below features: Brass coated steel sawing wire for cutting glass with high carbon; Brass coated steel sawing wire is cold drawing of brass plated of high strength steel wire; Brass coated steel sawing wire for cutting glass with below application: Brass coated steel sawing wire can be used for cutting high hardness of monocrystalline silicon; Brass coated steel sawing wire can be used for cutting silicon and quartz material etc Brass coated steel sawing wire can be used for cutting glass, magnet
Hengxing Brand new products on china market ultra fine 0.17mm brass coated steel wire Sawing wire for multi sawing solar wfter cutting Item: Sawing wire for multi-wire sawing Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available Hengxing Brand new products on china market ultra fine 0.17mm brass coated steel wire INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Steel Cord for Radial Tire 3*0.2+6*0.35NT Hengxing is a trusted partner of steel cord solutions. (1)Meets the highest performance, safety, environment and cost criteria. (2)Not easily be punctured, Extends tire life. (3)Strong wear resistance and long service life. (4)Strong safety, low noise and good absorption. (5)High strength and heavy load, Lower costs, lower weight and higher fuel savings. Steel Cord for Radial Tire 3*0.2+6*0.35NT INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Steel Cord for Radial Tire 3+8+0.33HT Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings Steel Cord for Radial Tire 3+8+0.33HT INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Post Tensioning ASTM Standard 12.7mm Steel PC Strand Good Performance Characteris (1)high tensile strength and elongation; (2)low relaxation value; (3)small stress losing; (4)excellent durable anti-fatigue performance. INTRODUCTION A branch factory of HENGXING group (listed in 2007) Professional on PC Steel Strand manufacturing An annual output of 300,000 tons ISO management certificated China National construction steel quality supervision and test center certificated Cooperated with National railway for many years
Copper Coated Tire Bead Wire Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord Advantage of Copper Coated Tire Bead Wire Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings INTRODUCTION: Copper Coated Tire Bead Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
