Rounded Cut Wire

Rounding Cut Wire ball produced by sung kwang, which is accurately cutting high carborn steel and removing sharp edge, is suitable for shot peening for goods because of its high durability and uniform hardness and diameter

Rounding Cut Wire ball produced by sung kwang, which is accurately cutting high carborn steel and removing sharp edge, is suitable for shot peening for goods because of its high durability and uniform hardness and diameter

Special Use: Free Cutting Steel
Wire Gauge: 1.8-14mm
Standard: AISI,ASTM,BS,DIN,GB,JIS
Application: ACSR Core , pulling pole ,overhead conductor, Messenger wire ,Static
Type: Galvanized
Origin : India and China

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity

Wire blast carbon steel and wire blast stainless steel can be used in the following three areas :1)Cutting use(cylindrical shape with sharp edge) 2)Section state (comers are round) 3)Integral state (ball shape).

The Stainless steel of wire blast becomes toughter as it is used. Therefore, it can be used as an abradant for much longer time.

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Advantage of
Sawing Wire for Solar Wafer Cutiing
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
INTRODUCTION:
Solar Wafer Cutting wire Silicon Cutting Sawing Wire
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated
Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.

Sawing wire for multi sawing solar wfter cutting
Item: Sawing wire for multi-wire sawing
Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon
Shape:wire
Material: Imported C-steel
Coating:Brass,combinations
Number of wires:1 wire
Other Name: Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Diameter:65um-350um available
Advantage of
Sawing Wire for Solar Wafer Cutiing

Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance.

Specification
Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials.

Application of Wire Cut EDM:
The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc
EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance

Advantages of Wire Cut EDM:
* The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle.
* High Precision. It is capable of making cuts that match your designs within �± 0.0001â??.
* Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up.
* Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce.
* Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible.
* Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.