Our galvanized steel & strand products have excellent mechanical properties. The vertical hot-dip galvanized technology ensures coating thickness. We employ the most experienced, talented, licensed engineers in the industry to design solutions for your application. 20 production lines for zinc coating and 34 lines for stranding wire ,with Independent test and research center, plus manufacturing facilities in Germany, Poland and Japan, give our customers unparalleled support and global reach. Galvanized steel strand is used for prestressed concrete structure reinforced, such as large-span bridges on railway and highway, overhead crane beam, rock-soil anchoring Project, multi- storey industrial buildings, stadiums, coal mines and etc. Available size and type (1)Galvanized steel :Φ1.44-4.77 mm (2)Galvanized strand:3 wires,4wires,5wires,7wires,19wires,37wires (3)Armoring steel wire 0.9mm and above
Henan Hengxing PC Steel Product Co.,Ltd was founded in 1995, has 24 years of experience in the production and manufacture of steel wire. The main products are galvanized steel wire, steel stranded wire, PC steel stranded wire, steel radial tire and so on. Listed on Shenzhen A stock market in 2007,we have independent R&D center, passed the ISO, SGS,BV certification and so on. As the biggest galavanized steel wire and srand manufacture in China, and the biggest steel cord for radial tire, with high quality and performance, our product widely used in the industries as electric cable, suspension construction, radial tire and hydrolic hose, and sawing.
This production is based on the standard of ISO 6892-1:2009,MOD or GB/T228.1-2010. The Zinc coat of it can reach to 12-20 gram per square metre.The diameter of it is from 0.5mm to 4.0mm. The packing is plastic inside and woven bags outside.
Standard:astm b415, astm b416, din48201 etc Capacity:2000ton/month Corrosion resistant in industrial, semi-industrial and marine environments Superior to aluminized steel Lightweight Same tensile strength as extra high strength steel but weighs 15 percent less Excellent conductivity much more conductive than galvanized steel and aluminum Wider variety of properties and size of steel wire, thickness of aluminum cladding, and quality of aluminum (cross sectional area ratio of the aluminum in as wire covers approximately 13% to 85% while that designated in astm b415-92 is fixed at 25%) Wider range of combinations of tensile strength and conductivity Sufficiently strong bonding strength at the boundary between aluminum layer and steel core Lighter in weight than galvanized and aluminized steel wire Excellent thermal stability for continuous operation in high temperature
Standard:astm a475, astm a 363 standard, bs 183 etc Capacity:2000ton/month Zinc coated carbon steel offers some corrosion resistance. G1070 is the most common grade used in aircraft cable and wire rope. It remains ductile over long periods of working. Usually higher break strengths than stainless steels. Utilities are all available It forms a coating of corrosion-resistant zinc which prevents corrosive substances from reaching the more delicate part of the metal It forms a coating of corrosion-resistant zinc which prevents corrosive substances from reaching the more Single galvanized steel wire is mild steel with a zinc surface layer. The zinc prevents rust even if the metal is scratched, however a powdery white corrosion will appear if it gets wet. The metal will turn from a shiny silver to a dull gray over time. Galvanized steel is magnetic.
Drawn low carbon steel wire for making steel wool and Nails Dim form 2.50 mm up to 6.00 mm , steel specification are according to AISI 1010 stendered
Diam: 1.06mm?1.18mm? 1.17mm?1.19mm?1.47mm Feature:Corrosion-resistant, delivery in specific length after alignment according to the requirements of customers, height not over 20mm(for steel wire of 36m), also processing according to the requirement of customers.
Galvanized steel wire factory, diameter:0.8-4.8mm, coil weight:50kg-800kg, coated thickness:15-35g.
Tungstencarbidecoldrollsisthemainproductsofuko,ourcoldrollsisusedinreinforcementwirecoldrollingandforming,wehadmorethan15yearsexperiencetoprocessingcoldrolls,andexportedto21countriesformorethan5years,tillnow,0complainofthequality. Thematerialofrollsblanksweusedaresinteredinhipfurnace,100%virginmaterial. Tungstencarbidecoldrolls/tcroll/tcrollingring/tcribbingroll/tungstencarbideroller(fo,ca/rt/ro,prtypes) 123x82x15mm 123x82x20mm 125x82x15mm 125x82x20mm 140x90x15mm 140x90x20mm 150x90x15mm 150x90x20mm 160x90x15mm 160x90x20mm Repairingserviceoftungstencarbiderollisoffered.
Confirming To ISI Specification HS Code 7217 engineering and Drawing Purpose Seaworth
Hot Dipped Galvanized Wire For Stay Wire Diameter: 1.80mm, 2.65mm, 3.25mm, 4.00mm Min. Tensile strength: 450Mpa or 700Mpa or 1100Mpa or 1570Mpa or 1770Mpa Zinc Coating: according to BS443( BS EN 10244-2:2001) Material: carbon steel Standard:IS: 2141, BS:183 Packing: coils or reels
We are an ISO 9001 certificated manufacturer of Galvanized(Zinc-Coated)steel wire & Strand, for Power & Communication cables materials, Static(Overhead Earth) wire, Guy(Stay) wire , Steel structural, Agricultural & fence usage. We can provide below quality goods: 1)Messenger wire Size: 7×1.4mm to 7×4.19mm ( 3/16inch, 1/4inch, 5/16inch, 3/8inch, 1/2inch) Standard: ASTM A 475-98 2)Galvanized steel core wires for Aluminum conductor ( ACSR) Size: 1.44mm to 4.77mm , 7×1.44mm to 7×4.25mm , 19×1.6mm to 19×4.0mm Standard: ASTM B 498, BS 4546, IEC 60888, EN 50189 3)Galvanized steel wires strand for poles or communication towers (Stay wire/guy wire of Poles or towers; Ground wire or Earth wire ) Size: 7×1.4mm to 7×4.25mm , 19×1.6mm to 19×3.8mm,3×2.64mm to 3×4.00mm Standard: ASTM A 363, ASTM A 475, BS 183... 4)Galvanized steel wires or strand for Cattle cable/Greenhouse/Fence Size: Plian wire 2.5, 2.8, 3.15, 4.0mm, 8.25mm with 7 wires, 10mm with 19 wires,7×1.57mm(3/16inch) With high quality, our goods have being expored to USA, Bahrain, Mexico, Chile, Peru, France, Vietnam, Phillippines over 25 countries.
l Low Relaxation Strand is made up of seven plain wires - six outer wires twisted around a central wire We,gives special emphasis to quality control in the production of LR Strand, not only of the final product, but throughout processing to ensure compliance with the appropriate standard. 2.LR Strand is manufactured in accordance with Australian Standard AS/NZS 4672,ASTM A 416,GB/T5224 etc. "Steel Prestressing Materials". During manufacture the strand is subjected to an isothermal heat treatment to ensure correct relaxation properties. 3.Low Relaxation Strand is used where large spans are desirable such as in the Pre-stressed and Post-tensioned Concrete Market for the construction of bridge beams, shopping centres, car parks and high rise buildings.
ACSR Core Wire 1) Profile: High Tensile Galvanized Steel Wire or ACSR Core Wire may be supplied as single wire or also in seven strands. Manufactured conforming to various international standards to specify requirement of customers. 2) Application: Used for mechanical re-inforcement in the manufacture of aluminum conductor steel reinforced (ACSR) Cable & Conductor ACSR Core wire is used in reinforcement of aluminium conductors used in distribution and transmission of electricity. 3) Material: high carbon steel 4) Diameter: 1.25-4.77mm 5) Technical Info: as below table 6) Packing: in coils, on spool 7) Standard: ASTM B498, IEC60888, IS 398 - Part II etc 8) All can be produced according to customers’ actual requirement.
Wire blast carbon steel and wire blast stainless steel can be used in the following three areas :1)Cutting use(cylindrical shape with sharp edge) 2)Section state (comers are round) 3)Integral state (ball shape). The Stainless steel of wire blast becomes toughter as it is used. Therefore, it can be used as an abradant for much longer time.
Rounding Cut Wire ball produced by sung kwang, which is accurately cutting high carborn steel and removing sharp edge, is suitable for shot peening for goods because of its high durability and uniform hardness and diameter
Rounding Cut Wire ball produced by sung kwang, which is accurately cutting high carborn steel and removing sharp edge, is suitable for shot peening for goods because of its high durability and uniform hardness and diameter
Low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
Stainless Steel: ASTM A 409, A 182, A276 Grade: 304, 304L, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S Carbon Steel: A105, ISO 2062 Alloy Steel: A182, Gr. F1, F2, F11, F22, F5, F9, F91 Nickel Alloys: B162, B127, B463, B576, B168, B443 Copper Alloys: Aluminium, Copper, Brass & Gunmetal Size: 2 mm to 1000 mm Duplex Stainless Steel : Other Grades: 2507, 2205, 2304, 153MA, 253MA, 309, 904L, 2595MO. Nickel Other Grade: ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 127UNS 4400 (MONEL 400 ) ASTM / ASME SB 424 UNS 8825 (INCONEL 825) ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 443 UNS 6625 (INCONEL 625) ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
The Series of Stainless Steel Wires Stainless steel wire Materials: usually 304, 304L, 316, 316L, etc. Types: stainless steel spring wire, stainless steel wire hydrogen back, stainless steel cold drawn wire, stainless steel bright wire, stainless steel electrolysis wires. Features: anti-corrosion, wear resistant, high tensile strength, maintenance-free, clean and convenient. Wire diameter: 0.1 - 8mm. Or made by your orders. Applications: widely used in medical equipment, precision instruments, electronic products, chemical industry, mesh weaving, crafts making, clothes hangers, hardware tools, etc. Packing: in coils or spools, packed in plastic bags, cartons, etc. Stainless steel spring wire Materials: 302, 304H, 304L, 316, 316L, 310, 310S, 321. Wire diameter: 0.03 - 6.0mm. Features: good abrasion resistance and compression resistance, excellent elasticity, strong flexibility, high-ductility and toughness. Four coils of stainless steel spring wires on the ground. Stainless steel spring wires are widely used in electron, chemical and medical equipment, etc. Stainless steel bright wire Materials: 302, 304, 304L, 316, 316L, 310, 310S, 321. Wire diameter: 0.1 - 8mm. Features: bright appearance, excellent heat and corrosion resistance. There are three coils of stainless steel bright wires on the ground. Stainless steel bright wire is applied in petroleum, electronics, machinery and construction, etc. Stainless steel cold drawn wire Materials: 302, 304, 304L, 316, 316L, 310, 310S, 321. Wire diameter: 0.03 - 6.0mm. Features: smooth surface, durable, excellent elasticity. Many coils of stainless steel cold drawn wires on the ground. Stainless steel cold drawn wire is widely used in construction, industry, chemical products, etc. Stainless steel wire hydrogen back Stainless steel wire hydrogen back also called hydrogen back stainless steel wire . Materials: 301, 302, 304, 304L, 316, 316L, 310, 310S, 321. Wire diameter: 0.03 - 8mm. Features: shiny appearance, non-magnetic, anti-fatigue, good softness, great elongation. A coil of stainless steel wire hydrogen back on the ground. Hydrogen back stainless steel wire is commonly used in nuclear power, aerospace, machinery, etc. Stainless steel electrolysis wire Materials: 201, 202, 301, 304, 316, etc. Wire diameter: 0.1mm - 8mm. Technique: electrolysis. Features: bright surface, high hardness, excellent rust resistance. Applications: widely used in car baskets, vegetables baskets, faucets, fisheries, coat hangers, crafts, needles, cleaning balls. There are many spools of 201 stainless steel electrolysis wires arranged in tidy orders. Stainless steel electrolysis wires is widely applied in petroleum, electronics, machinery and construction, etc. There are several spools of stainless steel electrolysis wires. Stainless steel electrolysis wires is widely applied in petroleum and electronic field.
