230W poly solar panel specification:
Module type Pm(W) Number of cell Max System Voltage(V) Vm(V) Im(A) Voc(V) Isc(A)
TS-S230P 230W 60 1000 30.2 7.56 36.7 8.18
Parameter:
Maximum system voltage (V) 1000
Temperature coefficients of Isc (%) +0.1%/
Temperature coefficients of Voc (%) -0.38%/
Temperature coefficients of Pm (%) -0.47%/
Temperature coefficients of Im (%) +0.1%/
Temperature coefficients of Vm (%) -0.38%/
Temperature Range -40 ---85
Tolerance Wattage (e.g. +/-5%) 3%
Surface Maximum Load Capacity 60m/s (200kg/sq.m)
Junction Box Type PPO, black
Connectors and Cables Type 4mm2
Length of Cables (mm) 900
Cell Efficiency (%) 16%
Output tolerance (%) 3%
Frame (Material, Corners, etc.)
Anodized Aluminum Alloy
Standard Test Conditions AM1.5 1000W/m2 25
Guarantee of power 5 years for the whole product, 90% power for 10years, 80% power for 25 years.
FF (%) 73.3%
Solar modules is well designed with good quality and high efficiency.We adopt 17-18% efficiency crystalline solar cell.We offter any size solar modules according with customer requirement. It is your best choice for telecommunications, traffic sign etc.
The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tubes vacuum has been compromised.
An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them. A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the thermos effect¡± created by having a vacuum between the layers of glass.
Type Multi crystalline silicon wafer ( B grade)
Size(mm) 156.6 (+0.0 to -0.5).
P/N type P
Do pant Boron
Resistivity(ohmcm) 0.5 û 5.0
Carbon Content 5.0x1017 atoms per cm3
Oxygen Content 3.0x1017 atoms per cm3
Life Time > 1.5 microsecond.
T T V less than or equal 50 microm.
Thickness 200 microm(+/- 30 microm)
Production(Casting) method EMC
Diffusion length greater than or equal to 50 micrometer
Conner angle(degree) 90.0 +/- 0.3
Beveled edge width 0.5 - 2 mm
Appearance Chip ( Width 0.8 mm, less than or equal 4 points.
9787 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
Micromorph Solar Modules-besides an amorphous silicon layer, the micromorph cell has a tandem structure with a additional microcrystalline bottom cell which can absorb red and near infrared spectrum, allowing an efficiency increase by approximately 30%, Achieving the breakthrough of conversion efficiency more than 9%.
Item NO : BSK-100P
Maximum Power(Wp): 100W
Maximum Power Voltage(V): 17.635V
Maximum Power Current(A): 5.672A
Open Circuit Voltage(V): 21.88V
Short Circuit Current(A): 6.22A
Size of Module(mm): 1154mm X 676mm X 35mm
Size of Glass(mm): 1148mm X 670mm X 3.2mm
Size of solar cells(mm): 156mm X 120mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.06 %/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 44.42
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 11.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Item no : BSK-120P
Maximum Power(Wp): 120W
Maximum Power Voltage(V): 17.4V
Maximum Power Current(A): 6.89A
Open Circuit Voltage(V): 21.75V
Short Circuit Current(A): 7.63A
Size of Module(mm): 1482mm X 676mm X 34mm
Size of Glass(mm): 1476mm X 670mm X 3.2mm
Size of solar cells(mm): 156mm X 156mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.065 %/
Temperature Coefficients of Voc(%): 0.346%/
Temperature Coefficients of Pm(%): 0.488%/
Nominal operating cell temperature: 45.32
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 12.5kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Item NO : BSK-80W
Maximum Power(Wp): 80W
Maximum Power Voltage(V): 17.5V
Maximum Power Current(A): 4.57A
Open Circuit Voltage(V): 21.6V
Short Circuit Current(A): 4.81A
Size of Module(mm): 1196mm X 556mm X 35mm
Size of Glass(mm): 1190mm X 550mm X 3.2mm
Size of solar cells(mm): 125mm X 125mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V
Temperature Coefficients of Isc(%): 0.06 %/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 44.42
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 8.5kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Item no : BSK-150W
Maximum Power(Wp): 150W
Maximum Power Voltage(V): 34.2V
Maximum Power Current(A): 4.36A
Open Circuit Voltage(V): 43.4V
Short Circuit Current(A): 4.94A
Size of Module(mm): 1580mm X 808mm X 35mm
Size of Glass(mm): 1574mm X 802mm X 3.2mm
Size of solar cells(mm): 125mm X 125mm
Number of cells(Pcs): 72pcs
Maximum System Voltage(V): 1000V/600V
Temperature Coefficients of Isc(%): 0.06%/
Temperature Coefficients of Voc(%): 0.397%/
Temperature Coefficients of Pm(%): 0.549%/
Nominal operating cell temperature: 45.32
Temperature Range: 40- +90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 15.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Packing: 728pcs/40¡± container , 14 pallets total per container
52pcs solar module per pallet
Packing size per pallet :1.65x1.12x1.85m.
Item NO : BSK-50W
Maximum Power(Wp): 50W
Maximum Power Voltage(V): 17.5V
Maximum Power Current(A): 2.86A
Open Circuit Voltage(V): 21.6V
Short Circuit Current(A): 3.5A
Size of Module(mm): 826mm X 556mm X 35mm
Size of Module(mm): 820mm X 550mm X 3.2mm
Size of solar cells(mm): 125mm X 83mm
Number of cells(Pcs): 36pcs
Maximum System Voltage(V): 1000V
Temperature Coefficients of Isc(%): 0.058 %/
Temperature Coefficients of Voc(%): 0.367%/
Temperature Coefficients of Pm(%): 0.485%/
Nominal operating cell temperature: 44.42
Temperature Range: 40 + 90
Surface Maximum Load Capacity: 200kgs/m2
Allowable Hail Load: 25mm@80km/h
Weight Per Piece (kg): 6.0kgs
Frame(Material,Corners,etc): Aluminum
Warranty : 5 years product warranty and 10 years 90% of power,25 years with 80% power.
Product Info:
Model No: SET-01
Diameter of Outer/Inner Tube: 47/37, 58/47
Length of Tube: 1500/1800, 1800
Thickness of Tube 1.60±0.15, 2.0±0.15 2.2±0.15
Technical Specifications:
Iten Specification: Three Targets (operation Temp. around 100°C)
Absorptance of Selective Coating (AM1.5): Alpha >= 92.5%
Emission of Selective Coating(80°C±5°C): sh <= 6.5%
Stagnation Parameter Y >= 240m²°C/kW
Emission of Selective Coating(80°C±5°C): sh <= 6.5%
Solar Radiance Exposure H <= 3.0MJ/m²
Average Heat Loss Coefficient ULT=0.65W/(m²•°C)
Selective Coating Material: SS-AL-N/Cu
Application field Hot water
Vacuum Quality P=3x10-3Pa
Pressure-proof: 0.6MPa
Impact Resistance Steel Ball Test: steel ball with diameter of 30mm fall on the evacuated tube vertically from 450mm height, the evacuated tube is not damaged.
Transmittance of GlassTube t=0.89 (AM1.5ISO9806-1:1994)
Material of GlassTube Borosilicate Glass 3.3
Knots of GlassTube Knots(Ø=1mm) =2 pieces in area of 10mmx10mm; Knots(Ø=, 2.5mm) = 5 pieces in the whole tube.
Specifications:
All glass evacuated tubes are the absorbing component of the solar water heater. They absorb solar energy and convert it into energy used for water heating. Each evacuated tube consists of two glass tubes which are made from extremely strong borosilicate glass. The outer tube is transparent, allowing light rays to pass through with minimal reflection. The inner tube is coated with a specially selected coating which features an excellent solar-radiation absorption rate and minimal reflection properties. The top of the two tubes are fused together and the air contained in the space between the two layers of glass is pumped out while exposing the tube to high temperatures. This "evacuation" of the gasses forms a vacuum, which is an important factor in the performance of the evacuated tubes.
Evacuated tube solar collectors still provide an excellent result on a cloudy day. This is because the tubes are able to absorb the energy from infrared rays, which can pass through clouds. Wind and low temperatures also have less effect on the function of the evacuated tubes when comparing them to the flat plate solar collectors. This comes due to the insulating properties of the vacuum.
As the key components of the solar collector, the evacuated tubes have a production that is optimized in geometry and performance.The tubes are composed of two concentric glass tubes with in each case are half spherically closed on one side and fused together on the other side.
In order to make the solar power usable, the internal glass tube is provided on its external surface with an environmentally friendly, highly selective layer and is thus designed as an absorber. This coating is thus protected within the vacuum gap. It is an aluminum nitrite sputter layer which is characterized by very low emission and very good absorption.
Application:
A. Solar cellphone charger compatible with most cellphone models
B. Solar charger for small digital electronics (PDA, MP3, CD player, digital camera etc.)
C. Solar battery charger
Specification:
a. Solar panel: 2.5w multi-crystalline silicon
b. Output: DC 5v 500mA
c. Material: ABS plastic
d. Battery Lithium battery, 1 pc 2400mAh
e. Temperature range: -40F to 176F /-40c to 80c.
Features:
a. No need to change the battery, 5 years lifetime
b. Two charging ways by sun and by AC charger
c. Charging equipment with 5V input such as Iphone, Ipad, camera, mobilephone,etc
d. Ligting and compass function for emergency.
Double load output series (SR-2L)
1. Individual control.
2. Five kinds of load working mode.
3. Adopts double MOS series circuit.
4. PWM charging mode.
5. Double digital LED display.
6. Use industry-specific chip and precision components.
Parameter:
Model: SR-L series
rated charging current: 5A ,10A ,15A ,20A
Rated discharging current: 5A ,10A ,15A ,20A
Working Voltage:12V ,24V ,12V/24V Auto
No load losses:<5mA
Charging circuit voltage drop: Less than or equal to 0.20V
Discharge circuit voltage drop: Less than or equal to 0.15V
Over voltage protection:17V,2/24V
boost charge voltage:14.6V; 2/24V (duration time: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage:14.4V,2/24V (duration time: 30 minutes)
Float charge voltage:13.6V,2/24V
Charge recover voltage:13.2V,2/24V
Over discharge recover voltage:12.5V,2/24V
Lower voltage indication:12.0V,2/24V
Over discharge voltage:11.1V,2/24V
Temperature compensation:-4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method:PWM Smart Charging
Working temperature:From -35 to +65
Over-load and short circuit protection:1.25 rated :loads current 30sec, 1.5 rated: loads current 5sec, over load protection action. ¡Ý3 Rated: load current short circuit protection action.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
PWM dimming series (SR-LP)
1. PWM digital dimming technology.
2. Can support 8 sessions dimming.
3. Double digital LED display and key.
4. PWM dimming indication.
5. Use combine with the constant current source.
6. The full power and half power working time can be set separately.
7. Various protections
Parameter:
Model: SR-LP series
rated charging current: 5A ,10A ,15A ,20A
Rated discharging current: 5A ,10A ,15A ,20A
Working Voltage: 12V ,24V ,12V/24V Auto
No load losses:<5mA,
Charging circuit voltage drop:Less than or equal to 0.20V
Discharge circuit voltage drop:Less than or equal to 0.15V
Over voltage protection:17V,2/24V,
boost charge voltage:14.6V; 2/24V (time of duration: 30 minutes) used every 7 days or when the battery is over discharged
Direct charge voltage:14.4V,2/24V (time of duration: 30 minutes)
Float charge voltage:13.6V,2/24V
Charge recover voltage:13.2V,2/24V
Over discharge recover voltage:12.5V,2/24V
Lower voltage indication:12.0V,2/24V
Over discharge voltage:11.1V,2/24V
Temperature compensation:-4.0mV//2V(boost voltage, direct charge, float charge and charge return voltage compensation)
Control method:PWM Smart Charging
Working temperature:From -35 to +65,
Over-load and short circuit protection:Over-load protection: when the current of controller is 1.25 times of the rated current, the controller works for 30 seconds; 1.5 times of rated current, works for 5 seconds Short circuit protection: when the current of controller is more than or equal to 3 times of rated current, the protection starts.
Circuit protection:
Over-charge, over-discharge, short circuit and over-load protection;
All the protections are harmless to any parts and fuse of controller;
Anti- connection-reverse protection for solar battery and storage battery.
1. Built-in LED constant current source.
2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%)
3. IP68 waterproof degree.
4. The max output voltage is 70V, which can drive 20 LED lamps installed in series
5. Various protections.
Specification:
System voltage: 12V/24V Auto
Output current: 330mA ¨C 2310mA
No-load loss: 5mA/12V;7mA/24V
Solar input voltage: < 55V
The Max. charging current: 8A
Overvoltage protection: 17.0V; 2/24V
Equal charging voltage: 14.6V; 2/24V(25), duration:1h
Ascending charging voltage:14.4V; 2/24V(25), duration:2h
Float charging voltage: 13.8V; 2/24V (25)
Return voltage during charging:13.2V; 2/24V (25)
Return voltage for over-discharging:12.5V; 2/24V
Over-discharging voltage:11.1V; 2/24V
Temperature compensation :-4.0mv//2V;
Light-control voltage :Light-control open 5V; light-control close 6V
Efficiency of constant current:90% - 96%
Current accuracy:+/-2%
Light-control judgment time :10min
The Max. output voltage:70V
Working temperature:-40 to +70;
Protection level:IP68
Weight :160g
Dimensions ; 825820(mm)(LWH).
Package:1pc/box;54pcs/ctn
Size: 280*280*220mm.
9787 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
