Double load output series (SR-2L) 1. Individual control. 2. Five kinds of load working mode. 3. Adopts double MOS series circuit. 4. PWM charging mode. 5. Double digital LED display. 6. Use industry-specific chip and precision components. Parameter: Model: SR-L series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage:12V ,24V ,12V/24V Auto No load losses:
1. Built-in LED constant current source. 2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%) 3. IP68 waterproof degree. 4. The max output voltage is 70V, which can drive 20 LED lamps installed in series 5. Various protections. Specification: System voltage: 12V/24V Auto Output current: 330mA ¨C 2310mA No-load loss: 5mA/12V;7mA/24V Solar input voltage: < 55V The Max. charging current: 8A Overvoltage protection: 17.0V; 2/24V Equal charging voltage: 14.6V; 2/24V(25), duration:1h Ascending charging voltage:14.4V; 2/24V(25), duration:2h Float charging voltage: 13.8V; 2/24V (25) Return voltage during charging:13.2V; 2/24V (25) Return voltage for over-discharging:12.5V; 2/24V Over-discharging voltage:11.1V; 2/24V Temperature compensation :-4.0mv//2V; Light-control voltage :Light-control open 5V; light-control close 6V Efficiency of constant current:90% - 96% Current accuracy:+/-2% Light-control judgment time :10min The Max. output voltage:70V Working temperature:-40 to +70; Protection level:IP68 Weight :160g Dimensions ; 825820(mm)(LWH). Package:1pc/box;54pcs/ctn Size: 280*280*220mm.
PWM dimming series (SR-LP) 1. PWM digital dimming technology. 2. Can support 8 sessions dimming. 3. Double digital LED display and key. 4. PWM dimming indication. 5. Use combine with the constant current source. 6. The full power and half power working time can be set separately. 7. Various protections Parameter: Model: SR-LP series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage: 12V ,24V ,12V/24V Auto No load losses:
Dual load output and double timeframe series (SR-2LT) 1. Various choices for storage battery. 2. Dual time period function. 3. Various choices for the data of controller. 4. Automatically recognize the period of night to keep the lighting time accurate. Parameter: Model: SR-2LT series rated charging current: 5A ,10A ,15A ,20A Rated discharging current: 5A ,10A ,15A ,20A Working Voltage: 12V ,24V ,12V/24V Auto No load losses:
Single-output series (SR-L) 1. PWM charging mode. 2. Five load working mode. 3. Digital LED display. 3. Over charging protection, over discharging protection, over load, short circuit protection, reverse polarity protection and TVS lightning protection. 5. Temperature compensation function. Parameter: Model:SR-L series rated charging current: 5A 10A 15A 20A 30A 40A Rated discharging current: 5A 10A 15A 20A 30A 40A Working Voltage:12V , 24V , 12V/24V Auto No load losses:
Power (W): 2/3; CCT (K): 3000/6500; IP65; Solar Panel: Mono Crystalline Technology, Voltage (V): 5 Battery: Lithium LiFePO4 Technology, Capacity (Ah): 2/2.6, Voltage (V): 3.2/ 3.7; Smart charge, discharge control enable battery protection and longer lighting time; Auto turning on/ off with light sensor or auto change brightness/CCT with sound sensor when someone is near; Flickerfree; CE, KC certified can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Solar panels harness sunlight to generate electricity, offering a sustainable and cost-effective energy solution. Made from photovoltaic cells, they reduce reliance on fossil fuels and lower greenhouse gas emissions. With minimal maintenance and a long lifespan, solar panels provide significant energy savings and contribute to a cleaner environment
