Commodity : Bitumen 50- 70 Type : Eastern European Penetration : at 25°C (50-70) Softening Point : at 0°C (46-54) Resistance to Hardening : at 1630c Change of Mass % : Max -0.5 Retained Penetration : Min -50 Softening Point After Hardening : Minimum Deg. C-48 Flash Point Minimum : Deg. C230 Solubility Minimum : %99 Kinematic Viscosity : at 135 Deg. C, Minimum mm2/s 295 Delivery : CIF Paranagua Port Quantity : 200 Metric Ton (MT) Spot for Test Extension 2000 MT Contract for 12 mos.
Bitumen 80/100 Test method Unit Specification Specific gravity @ 25 ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25 ASTM D5 mm/10 80/100 Softening point ASTM D36 42/50 Ductility @25 ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point ASTM D92 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Bitumen 40/50 Test method Unit Specification Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°c ASTM D5 mm/10 40/50 Softening point °c ASTM D36 °C 52/60 Ductility @25 °c ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point °c ASTM D92 °C 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
Bitumen 10/20 Test method Unit Specification Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°c ASTM D5 Mm/10 10/20 Softening point °c ASTM D36 °C 58/66 Ductility @25 °c ASTM D113 Cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint c ASTM D92 °C 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 max Spot test A.a.s.h.o.t102 Negative
Bitumen 30/40 Test method Unit Specification Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°c ASTM D5 mm/10 30/40 Softening point °c ASTM D36 °C 55/63 Ductility @25 °c ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point °c ASTM D92 °C 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Bitumen 120/150 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/m3 1000-1050 Penetration @ 25°C ASTM D5 mm/10 120/150 Softening point °C ASTM D36 °C 38 min Ductility @25 °C ASTM D113 Cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.5 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 218 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test â?? Negative
Bitumen 80/100 Test method Unit Specification Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°c ASTM D5 mm/10 80/100 Softening point °c ASTM D36 °C 42/50 Ductility @25 °c ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point °c ASTM D92 °C 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Dear Sir/Mdm, We would like to offer our BI Product from Tank Cleaning - Sludge Oil. Monthly Supply: 2 Million Liter. If you interest, You can email me Regards Danny
we are the prime intermediary for Eastern SiberiaPacific Ocean oil pipeline , confirm delivery to 100000 mtons to major port. All inquiries welcome.
We supplies different types of paraffin waxes that can be used in Personal Care, Adhesives, Candles, Inks and Coatings, Textiles and Polishes, Wax Compounding and other specialty applications. They function as lubricants, base materials, viscosity modifiers, etc, ensuring excellent performance at a competitive price. We offers a range of fully refined paraffin covering a wide range of melting points from 52°C to 68°C. Our general purpose paraffin waxes cover EPIWAX, Sasolwax, Renox and Woodshield brands. Specialty Blends: We has a comprehensive range of pharmaceutical grade waxes, specially formulated for use in personal care products like lipsticks, creams, lotions, depilatory products and color cosmetics, etc. Our Sasolwax grades display excellent performance, and exhibits consistently high quality products. In terms of standards, Sasolwax products are GMP, ISO and HACCP certified., for your peace of mind. We offer a comprehensive range of pharmaceutical grade paraffin waxes ranging from soft (Sasolwax 4608) to hard paraffin waxes (Sasolwax 5105, Sasolwax 5803 and Sasolwax 6203). Candle: We also supply specially formulated waxes for various targeted applications like wick coating waxes (Sasolwax 8204, Sasolwax 6301, etc) and candle extrusion (Sasolwax 0716, etc). In addition, we provide a unique range of specially formulated waxes, EPIWAX A10, A11 and A12, for use in crystal-effect candles. Additives: We also has a range of specialty wax additive, EPIWAX EM11 and EM12, for the manufacture of mottle-effect candles. For use in gel candles, we recommend Kraton G1650 for a transparent effect.
We supply a wide range of technical, cosmetic and pharmaceutical grade liquid paraffins, for use in the area of personal care, adhesives and polymer modification. N-Paraffin Our EPISOL range of n-paraffins, are fully synthetic, and are produced by a unique technology involving the direct synthesis of CO and H2. Being synthetic, it is ultra-pure, water-white and characterized by the absence of nitrogen compounds, sulphur, aromatics and other impurities. Applications for this product range from the area of metal working to part of hot melt pressure sensitive adhesives (HMPSA) formulation. Overall, our EPISOL range of n-paraffins cover a range of viscosities, are of low toxicity and are readily biodegradable, specially suited for the environmentally conscious producer. White Oils: Sasol Wax’s Merkur and our in house EPOIL brands of pharmaceutical, cosmetic and technical grade white oils are available in various viscosities. These Merkur and EPOIL grades are suitable for use in personal care products, pharmaceutical balms and ointments, etc. Polymerisation Solvents: Our EPOIL range of hydrocarbon oils are highly pure, and can be used as diluents for catalysts in various industrial applications. They are inert and free of catalyst poisons like sulphur compounds, carbonyls, oxygenates, cyclic compounds, etc. Solvent-Solvent Extraction: Our range of EPOIL and EPISOL liquid paraffins are suitable for use as metal extraction diluents, especially in the area of solvent-solvent extraction. Chlorinated Paraffin: EPChem provides chlorinated paraffin products by NCP Chlorchem, which is a South African-based manufacturer. The products have chlorine content ranging from 45-55% under the brand of PLASTICLOR e.g. CP52. It is commonly used in PVC compounding to produce flexible PVC as well as in paints. They act as an effective plasticizer and flame retardant additive in paints.
Crude palm kernel oil.
Mazut M100 Russian origin Mazut M100 miniumum 30 000 mts
Russian crude oil 30 000 barrels / 60 000 barrels
Air filter media, synthetic pocket media roll, triboelectric media roll, activated carbon media roll, plastic frames for air filters.
We are able to supply multiple kind of petroleum product. Please read the procedure before you have send any inquiry. Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund. Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately. Buyer triggers Proof of Fund (MT199) to Seller's fiduciary bank which shall be acknowledged by return SWIFT (MT199). Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification; a) Product Passport (dip test report) b) Authorisation-to-Sell & Collect (ATSC) c) Statement of Product Availability d) Refinery Commitment to Supply Product e) Certificate of Product Origin Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s). Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Seller's name to Buyer's name as legal title-holder of the product with the Ministry of Energy. Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank; a) Approval to Export (issued by the Ministry of Justice) b) Tank Storage Receipt c) Certificate of Conformity d) Full set of Bill of Lading (03 original copies) e) Vessel Notice of Readiness (NOR) f) Vessel Estimated Time of Arrival (ETA) g) Marine Insurance Certificate h) Material Safety Data Sheet (MSDS) i) Vessel Q88 Document j) Vessel details k) Ullage Report l) Cargo Manifest m) Corporate Invoice Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Seller's Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours. Seller pays commission to intermediaries as per MFPA within 50 hours.
Base Oil SN150 Available From Australia Regularly In Flexi Packing
Base Oil Sn300 Available In Flexi Bag From Australia
Base Oil Sn150 Available In Flexi Bag From Australia
