The scales may also be fitted to co-ordinate measurement or other measurement equipment used for high accuracy inspection & measurement
Our scales has the below specialities,
1. Quick speed of movement, above 60m per minute
2. bearings are adopted for the sliding part to provide easy movement and excellent repeated positioning function
3. Multi-layer isolating wire mesh and metal soft shell protection is adopted for signal cable to provide excellent water-proof and anti-interruption performance
4. Aluminum alloy material with anodic disposal is adopted for scale body and scale head is cast with hard chrome-plating alloy of wearing resistance
5. Special rubber is adopted for dust proof cover, which is of good scraping and corrosion resistance and small friction
6. Individualized components makes it very easy to install, maintain and repair the linear Encoder, and it is of Anti-water dust-proof and long life
7 .Glass precision measuring grating is adopted for the Linear Encoder as measuring benchmark to ensure high precision
8. Single light source illumination is adopted for good integration
The meter is designed according to measuring (Buick method) of GB/T456-1989 paper and cardboard smoothness and it is applied to measure smoothness of paper and cardboard, but not proper to measure the sheet above 0.5mm or with freer air permeability.
The meter borrows high accuracy vacuum sensor to test the vacuum, replace the mercury compression, so it is the flatness meter with no mercury. The meter use German vacuum equipment to vacuumize the container in a short time, which is controlled by microprocessor. It has powerful data processing, not only can test a sample and automatically store the result, but also analyze group of specimens to show the average, maximum, minimum, standard drift and variation ratio. All the results can be stored and displayed by LCD. In addition, it can print out the data in the requirement of experiment report according to GB/T456-1989.
Main technical character:
1.Glass board: donut, dimension: Big diameter 37.4+/-0.05mm, small diameter 11.3+/-0.05mm, valid dimensions 10+/-0.05cmª
2.Compression board: flat circle board with diameter 45mm, touching specimen with pressure (100+/-2Kpa)
3.Rubber pad: thickness 4+/-0.2mm, maximum variation of thickness+/-0.05mm, hardness 40+/-5 IRHD(International Rubber Hardness)
The tester is the basic instrument for testing the anti-bursting degree of paper and cardboard. It conforms to the standards of ISO2758 ,ISO2759 (standard testing for cardboard bursting strength) and GB1539 (method for testing cardboard bursting strength). It adopts signal transmitting press. When the specimen is burst, the tester stores the maximum of bursting strength automatically.
Characters:
1.Micro-computer control, use hydraulic oil as the driving force to break the specimen.
2.When the specimen is broken, it stores the maximum automatically.
3.LCD displays, the unit of kg, g and MPa in option.
It is applicable in testing the compression endurance and stacking strength of corrugated carton. Its every parameters and performance conform to the standards of ISO2872, ISO2874 and GB4857.4.
Technical characters:
Adopt advanced accurate sensor and foreign high capable motor, unite advanced measurement and control technology to get speed accuracy and precision measurement.
Gentle mechanical transmission, multi-level security protection function.
Large screen diagram display, print out quietly.
This meter is applying to do the ring crush test, the adhesive strength test, the flat crush test, the edge crush test and paper-tube strength test . It is the ideal testing equipment for papermaking, packaging, quality inspection department and so on.
Characters
Microprocessor control, automaticlly carry the test according to testing requests. Protect press sensor through the protection switch for over- loading. Analyzing the group of testing data and to show the maximum, minimum, average, standard deviation and coefficient of variation by lcd, print out the data.
Technical parameter:
1.Press measuring range: 0-5000n, resolution: 1n.
2.Accuracy: +/-1%
3.Speed: 12.5+/-2.5mm/min
4.Platen distance from top to bottom: 75mm (customized for special dimension)
Inserting and pulling force for all kinds of components such as switches, connectors, pcb, and etc. Window software operation and general tension and compression tests and analysis.
500MHz Timing-Mode (Internal Clock)
200MHz State-Mode (External Clock)
Advanced Multi-Level Triggering
Real-Time Sample Compression
+6V to -6V Adjustable Logic Threshold
I2C, SPI and RS232 Interpreters
Built-in 300MHz Frequency Counter
Specifications:
Sampled Channels 34
Timing Mode Sample Rate 1KHz to 500MHz
Sample Buffer 34x2048 samples
Maximum Time in compression mode: 10 hours(100MHz sample rates)
Trigger sequencer: 120MHz max, 6ns minimum pulse width
Trigger event counters: 20 bits, range 1 to 1,048,576 for each trigger level
Input impedance: 180K Ohms, paralleled by <5pF
Frequency counter range : 120MHz with 10Hz resolution, 4 channels
Threshold range : adjustable +6 to -6 volts with 50mv resolution
Threshold accuracy: +/-(100mV + 5% of setting)
Channel to channel skew: 0.6ns typical, 1.0ns max
State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @120MHz
Input dynamic range: 10 volts peak-peak
Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude
Timebase accuracy: +/-0.005% over full temperature range
Input Probe: Teflon insulated leads terminated with female contacts
compatible with 0.025"-0.030" round or square pins.
Power supply current: 200 milliamps max (supplied by USB)
Temperature range: operating +5 to +50C, storage -10 to +65C
Port: USB1.1 or 2.0
Operating systems: Win98/ME/2000/XP/Vista
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Features:
1.Signal Frequency Range: 0-5MHz ; Frequency Counter range: 0~2.7GHz
2.Outputs: One channel of Arbitrary Waveform ; 8 Bits signal; Synchronized signal
3.Inputs: Two channels of Frequency counter; 8 Bits signal; External Trigger
4.Arbitrary Waveform edited by mouse
5.General waveforms: Sine, Square, Triangle, Saw-tooth, TTL, White Noise, Gauss noise, Exponent, AM, FM
6.Settable Parameters: Amplitude, Frequency, Offset
7.The data fileí»s format is completely compatible with Tektronixí»s products and software. It can read directly the data files from and be edited by Tektronixí»s software.
8.DDS technology, High accuracy and resolution, wide software supporting,
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Nutra-dip continuous tri meter
Specifications ym-2006
The ym mounts to the wall while the wands are always immersed in your hydroponics reservoir for constant readouts.
This meter features three screens that read ph from 0-14,
Tds from 0-9990 ppm, ec from 0.00-19.99ec, cf from 0.0-199cf,
And water temp from -58-158 degrees f, -5070 degrees c,
BaiXin Automatic Civil Static Discharger ó=,it can eliminate the daily static full-automatically.
Wear it on the wrist, just like wearing the wrist-watch. It can survey and dispel the static automatically, that on user's body and on the object in range of 30cm.
So, while wearing it, it will dispel the static that the human body produced at any time. Keep the static in the human body within a level harmless to health.And before you touch objects, dispel the static on those objects in order to prevent you from being hit to by the static.(Its speed of dispelling the static is enough to dispel the static of both sides before your hands meet the other side.)
It has many kinds of ways of wearing, you can choose according to the need.
Using it, you can totally get rid of the interference of the static.
Function
Wide range: FA service range covers an area within a 30cm radius from this product which can be used for human body, vehicle, electronic product, hardware, etc. (The actual service range depends on the environment of use)
Fast: Static electricity can be eliminated within 0.2 second.
Good effect: completely clear up the static hazard.
Safety: This product is absolutely safe without any poison and hazard.
Usage
Just wearing the discharger, it will automatically eliminate static. There are many wearing ways:
ó+ Wear on the wrist (recommended wearing way);
ó+ Hang on body;
ó¦ Put into pockets;
When meeting static, the static indicator light will show, then static hazard has been eliminated.
The Detail Specificationú¦
Product specificationú¦4.5cm*3cm*1.5cm
Model numberú¦BX--42
Color ú¦(shell+face) silver+blickíówhite+redíówhite+whiteíówhite+orangeíópink+pink
Customized Productú¦ Negotiation
OEM: 10,000 more
Silkscreen: Yes (above 1000)
Quality / Safety Certification: CE ROHS
Pack the way ú¦B=B Corrugated Carton
PS:
The static hazard
Ø Static may cause all kinds of cardiovascular disease (arrhythmia, tachycardia,etc.);
Ø Static may cause myocardial infarction or cerebral thrombosis for the elderly;
Ø Static may cause pregnant women in progesterone levels dropped to abortion or premature, or even to fetal deformity;
Ø Static may inhibit male hormones of the elderly, and cause the sex dysfunction;
Ø Static may cause premature senility;
Ø Static may cause headache, insomnia, palpitation, nausea heart, psychological
Ø Static may cause skin dryness, allergies, itch,erythema and pigmentation.
Ø Static can cause electronic products injury, shorten usage life and cause fires etc.
Product specificationú¦4.5cm*3cm*1.5cm
Pack the way ú¦B=B Corrugated Carton
CATIA V5 is the leading solution for product development success. It addresses all
manufacturing organizations, from OEMs through their supply chains, to small
independent producers. CATIA, for virtual product design, can be applied to a wide
variety of industries, from aerospace, automotive, and industrial machinery, to
electronics, shipbuilding, plant design, and consumer goods. Today, CATIA is used to
design anything from an airplane to jewelry and clothing. With the power and functional
range to address the complete product development process, CATIA supports product
engineering, from initial specification to product-in-service, in a fully-integrated manner. It
facilitates reuse of product design knowledge and shortens development cycles, helping
enterprises accelerate their response to market needs.
Empower end-to-end industry process coverage for composite design to
manufacturing, electrical harness design to documentation and printed circuit
board design.
Increase range of manufacturing part designed with Functional modeling
Superior productivity for powertrain and chassis designer with breakthrough
auto-draft
Extends the scope for multi-discipline 3D collaborative environment with
ENOVIA VPLM Navigator
Expands the reach of 3D to a wider community with CATIA 3DLive and 3D XML
BaiXin Automatic Civil Static Discharger ó=,it can eliminate the daily static full-automatically.
Wear it on the wrist, just like wearing the wrist-watch. It can survey and dispel the static automatically, that on user's body and on the object in range of 30cm.
So, while wearing it, it will dispel the static that the human body produced at any time. Keep the static in the human body within a level harmless to health.And before you touch objects, dispel the static on those objects in order to prevent you from being hit to by the static.(Its speed of dispelling the static is enough to dispel the static of both sides before your hands meet the other side.)
It has many kinds of ways of wearing, you can choose according to the need.
Using it, you can totally get rid of the interference of the static.
Function
Wide range: FA service range covers an area within a 30cm radius from this product which can be used for human body, vehicle, electronic product, hardware, etc. (The actual service range depends on the environment of use)
Fast: Static electricity can be eliminated within 0.2 second.
Good effect: completely clear up the static hazard.
Safety: This product is absolutely safe without any poison and hazard.
Usage
Just wearing the discharger, it will automatically eliminate static. There are many wearing ways:
ó+ Wear on the wrist (recommended wearing way);
ó+ Hang on body;
ó¦ Put into pockets;
When meeting static, the static indicator light will show, then static hazard has been eliminated.
The Detail Specificationú¦
Color ú¦(shell+face) silver+blickíówhite+redíówhite+whiteíówhite+orangeíópink+pink
Customized Productú¦ Negotiation
OEM: 10,000 more
Silkscreen: Yes (above 1000)
Quality / Safety Certification: CE ROHS
PS:
The static hazard
Ø Static may cause all kinds of cardiovascular disease (arrhythmia, tachycardia,etc.);
Ø Static may cause myocardial infarction or cerebral thrombosis for the elderly;
Ø Static may cause pregnant women in progesterone levels dropped to abortion or premature, or even to fetal deformity;
Ø Static may inhibit male hormones of the elderly, and cause the sex dysfunction;
Ø Static may cause premature senility;
Ø Static may cause headache, insomnia, palpitation, nausea heart, psychological
Ø Static may cause skin dryness, allergies, itch,erythema and pigmentation.
Ø Static can cause electronic products injury, shorten usage life and cause fires etc.
Product specificationú¦4.5cm*3cm*1.5cm
Pack the way ú¦B=B Corrugated Carton
The 2-channel digital storage oscilloscope at an outstanding price! When connected to PC with USB2.0 interface, you get a fully-featured storage oscilloscope with the extra advantage of being able to easily store data for later processing.
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
2160 Scientific Instruments Suppliers
Short on time? Let Scientific Instruments sellers contact you.
