500MHz Timing-Mode (Internal Clock)
200MHz State-Mode (External Clock)
Advanced Multi-Level Triggering
Real-Time Sample Compression
+6V to -6V Adjustable Logic Threshold
I2C, SPI and RS232 Interpreters
Built-in 300MHz Frequency Counter
Specifications:
Sampled Channels 34
Timing Mode Sample Rate 1KHz to 500MHz
Sample Buffer 34x2048 samples
Maximum Time in compression mode: 10 hours(100MHz sample rates)
Trigger sequencer: 120MHz max, 6ns minimum pulse width
Trigger event counters: 20 bits, range 1 to 1,048,576 for each trigger level
Input impedance: 180K Ohms, paralleled by <5pF
Frequency counter range : 120MHz with 10Hz resolution, 4 channels
Threshold range : adjustable +6 to -6 volts with 50mv resolution
Threshold accuracy: +/-(100mV + 5% of setting)
Channel to channel skew: 0.6ns typical, 1.0ns max
State mode Setup/Hold times: 2.0/0ns, window adjustable +/-2.5ns
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @120MHz
Input dynamic range: 10 volts peak-peak
Maximum input: +/-40 volts DC, 15 volts peak-peak pulse amplitude
Timebase accuracy: +/-0.005% over full temperature range
Input Probe: Teflon insulated leads terminated with female contacts
compatible with 0.025"-0.030" round or square pins.
Power supply current: 200 milliamps max (supplied by USB)
Temperature range: operating +5 to +50C, storage -10 to +65C
Port: USB1.1 or 2.0
Operating systems: Win98/ME/2000/XP/Vista
Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Supplier: Pc-based oscilloscope, arbitrary waveform generator, logic analyzer, oscilloscope, function generator, usb, signal generator, dds, digital storage oscillscope, tese & measuing, frequency counter, spectrum analyzer, data acquistion card
Two input channels. External Trigger input. Probe calibrator: 1kHz, 2Vpp. Resolution 8 or 9 bit. Vertical deflection: 10mV/div-5V/div in 9 steps or 10mV/div-10V/div in 10 steps. Horizontal deflection 4ns/div-1h/div in 38 steps. Input Coupling AC/DC/GND. X-Y mode, Storage depth 32kB~512kB/channel. Comprehensive range of trigger functions. Auto-set Measurement. Max. Input Voltage 35V DSO-2090 USB: Bandwidth 40MHz (-3dB), Max. Sampling Rate 100MS/s DSO-2150 USB: Bandwidth 60MHz (-3dB), Max. Sampling Rate 150MS/s DSO-2250 USB: Bandwidth 100MHz (-3dB), Max. Sampling Rate 250MS/s DSO-2500 USB: Bandwidth 200MHz (-3db), Max. Sampling Rate 500MS/s DSO-5200 USB: Bandwidth 200MHz (-3dB), Max. Sampling Rate 200MS/s, Equivalent Sampling Rate 50GS/s DSO-5200A USB: Bandwidth 200MHz (-3dB), Max. Sampling Rate 250MS/s, Equivalent Sampling Rate 50GS/s Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Features: 1.Signal Frequency Range: 0-5MHz ; Frequency Counter range: 0~2.7GHz 2.Outputs: One channel of Arbitrary Waveform ; 8 Bits signal; Synchronized signal 3.Inputs: Two channels of Frequency counter; 8 Bits signal; External Trigger 4.Arbitrary Waveform edited by mouse 5.General waveforms: Sine, Square, Triangle, Saw-tooth, TTL, White Noise, Gauss noise, Exponent, AM, FM 6.Settable Parameters: Amplitude, Frequency, Offset 7.The data fileí»s format is completely compatible with Tektronixí»s products and software. It can read directly the data files from and be edited by Tektronixí»s software. 8.DDS technology, High accuracy and resolution, wide software supporting, Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
The 2-channel digital storage oscilloscope at an outstanding price! When connected to PC with USB2.0 interface, you get a fully-featured storage oscilloscope with the extra advantage of being able to easily store data for later processing. Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
The 2-channel digital storage oscilloscope at an outstanding price! When connected to PC with USB2.0 interface, you get a fully-featured storage oscilloscope with the extra advantage of being able to easily store data for later processing. Small size(mm):190(L)x100(W)x40(H) , light weight: 380g , easy to carry.
Spectrum Analyzer SA9130 Series The new high-performance Spectrum Analyzer SA9130 Series were developed with all-digital IF technology to meet demanding customer requirements, its professional bench type, compact size, elegant outlook to show our well design. We can also provide rf spectrum analyzer. Suin is a China supplier and manufacturer of 3 ghz Spectrum Analyzer,Rf Spectrum Analyzer, digital spectrum analyzer. Preamplifier and EMI filter are standardly configured. If you want to know more about cheap spectrum analyzer, welcome to contact us. Features *Frequency range from 9kHz to 3.0 GHz *-160dBm Display Average Noise Level (Min.) *< -100 dBc/Hz @10 kHz Offset Phase Noise (Typ.) *Total Amplitude Accuracy < 0.8 dB *Preamplifier and EMI filter are standardly configured. Specification SA9130 Frequency Range 9kHz to 3.0GHz Resolution 1Hz Frequency Span Frequency Span Range 0Hz, 100Hz to 3GHz Uncertainty ±span/(sweep points-1) SSB Phase Noise -80dBc/Hz (10 kHz offset, fc=1.0GHz) Bandwidth Resolution Bandwidth (-3dB) 10Hz ~ 1MHz, step 1-3-10, RBW Uncertainty 10%, nominal (RBW>1kHz) 20%, nominal(RBWâ?¥10Hz, sweep timeâ?¥5s) Video Bandwidth (-3dB) 1Hz to 1MHz, step 1-3-10 Amplitude Range DANL to +30dBm Maximum Input Level DC Voltage: 50V CW RF Power: +30dBm (1.0W) Max.Damage Level: +40dBm (10W) Displayed Average Noise Level (DANL) DANL (Preamplifier Off) typ. -125 dBm DANL (Preamplifier On) typ. -135 dBm Reference Level Range -100 dBm to +30 dBm, step 1 dB Sweep Sweep Time Range 10 ms to 3000 s (100Hzâ?¤Spanâ?¤3GHz) 20 μs to 3000 s (Span=0 Hz) Sweep Time Uncertainty 5%, nominal (100Hzâ?¤Spanâ?¤7.5GHz) 0.5%, nominal (Span=0 Hz) Sweep Mode Continuous, Single Trigger Trigger Source Free, Video, External External Trigger Level 5 V TTL level Advanced Measurement Channel Power, Adjacent Channel Power, N-dB bandwidth, Occupied Bandwidth EMI 200Hz, 9kHz, 120kHz Input/Output RF Input Impedance 50 Ω Standard frequency Frequency: 10MHz -3dBm to +3dBm (output) Interface Type USB Host & Device, LAN, VGA, RS-232 (only SA9100 series available) General Characteristic Power Supply Input Voltage: AC100V to 240V Frequency: 50/60Hz (1±10%) Power Consumption: 35W Dimension & Weight 363*154*327 mm, Approx. 6.0 kg
UNI-T UTD4000C Series: Digital Storage Oscilloscopes 2 Channels 100MHz / 200MHz / 300MHz 2GS/s Optional Type : Option 1: UTD4061C Option 2: UTD4102C Option 3: UTD4202C Option 4: UTD4302C Product Features : 2GS/s real-time sampling rate; Dual time base function; unrivaled waveform detail observation and analysis capabilities; 16-channel logic analyzer; 3�½ digital multimeter; Unique envelop sampling feature with direct visual display of carrier wave details after amplitude modulation; Quick waveform acquisition and color change function that visually describes the strength of waveform; Supports plug-and-play USB storage devices and capable of communicating with a computer; USB drive system software upgrade; Built-in FFT and Multiple waveform mathematics functions (including add, subtract, multiply and divide); Edge, Video, Pulse Slop and Alternate trigger functions. Product Specification : Model: UTD4302C Channels: 2 Bandwidth: 300MHz Sample Rate: 2GS/s Rise Time: â?¤1.2ns Memory Depth: 24kpts Waveform Acquisition Rate: â?¥2,000wfms/s Vertical Sensitivity: 1mV/div~10V/div Timebase Range: 5ns/div~50s/div Storage: Setup, Wave, Bitmap, CSV Trigger Modes: Edge, Plus, Video, Slope, Alternate, LA Interface: USB Device, USB Host, Pass/Fail, LA Interface, Multimeter Interface Model: UTD4062C Channels: 2 Bandwidth: 60MHz Sample Rate: 2GS/s Rise Time: â?¤5.8ns Memory Depth: 24kpts Waveform Acquisition Rate: â?¥2,000wfms/s Vertical Sensitivity: 1mV/div~10V/div Timebase Range: 5ns/div~50s/div Storage: Setup, Wave, Bitmap, CSV Trigger Modes: Edge, Plus, Video, Slope, Alternate, LA Interface: USB Device, USB Host, Pass/Fail, LA Interface, Multimeter Interface Model: UTD4102C Channels: 2 Bandwidth: 100MHz Sample Rate: 2GS/s Rise Time: â?¤3.5ns Memory Depth: 24kpts Waveform Acquisition Rate: â?¥2,000wfms/s Vertical Sensitivity: 1mV/div~10V/div Timebase Range: 5ns/div~50s/div Storage: Setup, Wave, Bitmap, CSV Trigger Modes: Edge, Plus, Video, Slope, Alternate, LA Interface: USB Device, USB Host, Pass/Fail, LA Interface, Multimeter Interface Model: UTD4202C Channels: 2 Bandwidth: 200MHz Sample Rate: 2GS/s Rise Time: â?¤1.8ns Memory Depth: 24kpts Waveform Acquisition Rate: â?¥2,000wfms/s Vertical Sensitivity: 1mV/div~10V/div Timebase Range: 5ns/div~50s/div Storage: Setup, Wave, Bitmap, CSV Trigger Modes: Edge, Plus, Video, Slope, Alternate, LA Interface: USB Device, USB Host, Pass/Fail, LA Interface, Multimeter Interface Characteristic : Power: 100-240VAC, 45-440Hz Display: 5.7 Inches 64K Color TFT LCD, 320�?240 Product Color: White and Gray
Supplier: Automatic weather station, water quality instruments, hydro logical instruments, meteorological instruments, air quality equipments, scientific instruments, smart grid automation, SCADA, protocol analyzer
PD282 Double Channel Vehicle Loop Detector Introduction PD282 double channel Vehicle Loop Detector allows for detection of metalic objects entering into the field formed around the detection loop. We have designed PD-182 with the following objectives in mind: 1. It can work as 1 single loop detector 2. It can work as two independent loops 3. It can work with direction logic 4. It can work as speed measurement (speed trap) 5. It can work as traffic analyzer 6. It detects if vehicle was bike, car or truck 7. Fail safe mode 8. Uart protocol 9. Detect stop. 10. Detect not-stop Technical data Operating voltages: 12V AC/DC ±5% 24V AC/DC ±5% 110V AC ±10% 220V AC ±10% Power consumption:
