CJX7/A Types 3 Phase Electrical Contactor is mainly used in power system with AC 50Hz(or 60Hz), the rated working voltage up to 660V, under the application category of AC-3, when the rated working voltage 380V, the rated operating current to 300A electrical, for the long-distance range making and breaking the electric circuit, and combines the electromagnetism starter with the suitable thermal overload relay or the electronic protector to protect against the possible overload electric circuit during operation(running).
1. GMC electrical magnetic ac contactor is suitable for using in the circuits up to the rated voltage 660V AC 50HZ or 60HZ, rated current up to 95A, for making frequently starting & controlling the AC motor. 2. 09-220A GMC AC Contactor can be Combined with the auxiliary contact block, thermal relay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. 3. With the thermal relay, it is combined into the electromagnetic starter.
CJ19 electrical Switch-over Capacitor Contactor is mainly applicable to a power line of AC 50Hz or 60Hz, rated working voltage up to 380V. It is used to put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at switching on and suppress the over-voltage at switching off.The product is in conformity with the standards IEC947-4-1.
CT single phase Household Contactor is suitable for using in the circuits up to the rated voltage 400V AC 50/60Hz rated current up to 63A,for making ,frequently starting and machine interlocking device,it becomes the delay the contactor,mechanical interlocking contactor star-delta starter,with the thermal relay , it is combined into the electromagnetic starter.the contactor is according to IEC61095, EN61095, GB17885.
CJ40 3P magnetic motor starter ac contactor is mainly used for AC 50Hz (or 60Hz), rated voltage to 660V (or 1140V, rated current of 1000A connected to power lines and breaking the circuit, and can with the appropriate thermal relay or electronic protection device combined into electromagnetic starter in order to protect the circuit overload that may occur. Products comply with GB14048.4, IEC 60947-4-1, and GB21518-2008 "AC contactor limit value of energy efficiency rating and energy efficiency rating.
CJT1 220V-380V air ac modular contactor is suitable for frequency 50HZ,rated insulation voltage up to 380V, rated operation current 10-150A. It is mainly used for making or breaking electric circuits at a long distance and for frequent starting and stopping and controlling AC motors. It is used in combination with thermal relay to compose a magnetic motor starter. The product accords with standard IEC 60947-4-1,GB14048.4
LP1-D series DC operated AC contactor is suitable for use in the circuits up to rated voltage 660V AC 50Hz or 60Hz,and in rated current 9-95A in AC-3/380V load circuits It for remote controlling circuit making,breaking and frequent starting AC motors It can also combine with the auxiliary contact group,air delayer,thermal relay devices etc
1. CJX2-K LC1-K Three Phase ac mini contactor is suitable for use in the circuit up to the rate and frequent starting, controlling the AC motor. 2. The addition of auxiliary contact group to the contactor, combined with the proper thermal relay, can act to protect the circuit bound to overload. 3. The LC1-K Series AC Contactor complies with IEC947-2,VDE0660 and BS5452 .
LC1-D 3p Ac magnetic power contactor is mainly used in 50/60Hz electrical lines of the rated voltage up to 660V AC and rated current up to 370A,are applicable for remote making and breaking of electrical lines or frequent control of AC motors, having no-voltage protection. Usually, it can be combined with JR29 series thermal relay to form electromagnetic starters which have overload and open-phase protection. It complies with IEC947-4-1
CJX2-N LC1-N ac mechanical interlock contactor is suitable for using in the circuits up to the rated voltage 660V AC 50/60Hz, current 620A, for convertible controlling the motor. This mechanical interlocking device ensures contact changeover of the two convertible contactors. It conforms to IEC60947-4-1
iCT DIN Rail Modular Contactor is a kind of control electric appliance which is used for long distance/remote switch on and break off a non-inductive load or low inductive load, such as electric resistance furnace, household appliances and similar low inductive load,motor and other household application.
CJ20 220v ac types of contactor is suitable for frequency 50Hz, rated voltage up to 660V, rated current up to 630A. It is mainly used foe making or breaking electric circuits at a long distance,and starting, stopping,controlling the AC motor frequently . It is used in combination with thermal relay to compose magnetic motor starter. The product conforms to IEC60947-4-1 and GB14048.4
3TF Series AC low voltage Contactor is suitable for frequency 50/60Hz, rated insulation voltage up to 1000V, rated operation current 9~475A under AC-3 duty. It is mainly used for making or breaking and frequent starting& stopping electric circuit at a long distance. It can combine with the thermal relay to compose a magnetic motor starter. The product conforms to IEC60947-4-1.
HLC series definite purpose contactors (1-pole, 2-pole, 3-poleand 4-pole , 20-40a ) are ideal for hvac, air conditioning, refrigeration, heating, data processing, welding, elevators, hoists & cranes, lighting, pools & spas and food service equipment.
Breaker (MCB, MCCB, RCCB, ELCB), Ac contactor, Relay, electrical accessories, Industry plug, socket & coupings, Bell, Surge protective device ( PD), Residual current device (RCD).
Contactor , mccb , mcbs.
Carbon brush, carbon vanes, carbon rings.
Electrical contactors.
Electrical contactor, contactors.
Power contactor 06 amp to 500 amp.Export
