TeSys D contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3/3e (4kW@400V). It provides a 220V 50/60Hz AC coil and 1NO+1NC built-in auxiliary contacts. Multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh)
CJX7/A Types 3 Phase Electrical Contactor is mainly used in power system with AC 50Hz(or 60Hz), the rated working voltage up to 660V, under the application category of AC-3, when the rated working voltage 380V, the rated operating current to 300A electrical, for the long-distance range making and breaking the electric circuit, and combines the electromagnetism starter with the suitable thermal overload relay or the electronic protector to protect against the possible overload electric circuit during operation(running).
1. GMC electrical magnetic ac contactor is suitable for using in the circuits up to the rated voltage 660V AC 50HZ or 60HZ, rated current up to 95A, for making frequently starting & controlling the AC motor. 2. 09-220A GMC AC Contactor can be Combined with the auxiliary contact block, thermal relay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. 3. With the thermal relay, it is combined into the electromagnetic starter.
CJ19 electrical Switch-over Capacitor Contactor is mainly applicable to a power line of AC 50Hz or 60Hz, rated working voltage up to 380V. It is used to put a low voltage parallel connected capacitor in operation or switch it off in a low voltage reactive power compensation device. The contactor is equipped with a surge suppressor, which can effectively reduce the surge current passing through the capacitor at switching on and suppress the over-voltage at switching off.The product is in conformity with the standards IEC947-4-1.
LP1-D series DC operated AC contactor is suitable for use in the circuits up to rated voltage 660V AC 50Hz or 60Hz,and in rated current 9-95A in AC-3/380V load circuits It for remote controlling circuit making,breaking and frequent starting AC motors It can also combine with the auxiliary contact group,air delayer,thermal relay devices etc
Agni /cu bimetal contact rivet: in low voltage engineering, this contact is widely used in ac switches & contactors as an electrical contact. Inner package: vaccum plastic bag; outside package:carton 28cmx14cmx22cm
* 200 Amps Normally Open 24VDC with auxiliary switch * Double coils * Customized available
4P 60kA AC surge protector This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system, it protect to indirect and direct lightning effect or other transient over voltage SPD design according with GB18802.1/IEC61643-1 standard. Specification details: Model PQ1-60 Poles 4P Max. continious working voltage(Uc) 420V AC(can customized) Nominal discharge current(In) 30kA Max.discharge current(In) 60kA Voltage protection level(Up) 2.0kV Matched circuit breaker/Fuse 32A Response time
2P 80kA AC surge protector This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system, it protect to indirect and direct lightning effect or other transient over voltage SPD design according with GB18802.1/IEC61643-1 standard. Specification details: Model PQ1-80 Poles 2P Max. continious working voltage(Uc) 420V AC(can customized) Nominal discharge current(In) 40kA Max.discharge current(In) 80kA Voltage protection level(Up) 2.5kV Matched circuit breaker/Fuse 32A Response time
Power Contactor Range Rating: 9A~200A Poles: 3Pole & 4Pole Available Brands : Scheneider, Siemens, ABB, Larsen & Toubro, Eaton, C&S, Legrand, Havells, BCH
