1.The pressure-bearing components are forged, so it has better strength and impact toughness;
2.Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;
3.The auxiliary oil cylinder affords a smaller volume with same function; double ram Cameron U BOP
4.The ram rubber has massive storage volume, and it adopts self-contained sealing;
5.The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;
6.Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.
Dredging projects can be divided into several types, including capital construction dredging project for port and shipping lane construction, maintenance dredging to the operated port and shipping lane to guarantee enough navigation dimensions, environmental dredging for the silt cleaning of river, lake and sea, dredger filling projects to strength the coast protection or land reclamation. So silt dredge hose is need in these projects, which is mainly used for the suction and discharge of silt.
Silt dredge hoses, also called slurry dredge hose, are usually installed on the two sides of the dredge pump to suck and discharge silt. They are easy to install and remove due to the unique construction of flanges on the each end of hose. Silt dredge hose is very flexible and stable, and it can reduce the vibration caused by storm and water movement. It is highly resistant to abrasion and aging.
Silt dredge hose consists of tube, reinforcement and cover. The tube is made from the mixture of natural rubber and synthetic rubber, mainly EPDM, making the silt dredge hose resistant to abrasion, corrosion and aging. Reinforcement of silt dredge hose is made from multiple synthetic fabrics with spring helix steel w ire, making the hose have very high tensile strength and have the ability of absorbing shock and vibration. The cover is made from SBR, which makes silt dredge hose resistant to cut, abrasion, corrosion, weather, ozone, sunlight and aging.
Many silt dredge hoses are on the ground
Silt dredge hose.
A silt dredge hose with black flanges.
Silt dredge hose with black flanges.
Details of silt dredge hose:
Structure: silt dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the silt dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of silt dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SFH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SFH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SFH-03 10 254 11-1/5 284 1 10 2 20 10
SFH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SFH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SFH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SFH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SFH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SFH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SFH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SFH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SFH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SFH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
Dredge hose can be used to handle many types of media such as slurry, silt and sand for its excellent abrasion resistance. And it is also used to handle seawater. This is seawater dredge hose. It is mainly used for the suction and discharge of seawater.
Our seawater dredge hose is composed of three parts: tube, reinforcement and cover. The tube is made from the blend of EPDM and natural rubber, which makes the seawater dredge hose highly resistant to abrasion, corrosion, aging and weather. So it can transport the corrosive medium - seawater. The reinforcement is made from spring helix steel wire with multiple synthetic textile, making the seawater dredge hose resistant to kink. And the reinforcement provides full vibration dampening. The cover is made from super high quality neoprene, which makes the seawater dredge hose resistant to corrosive salt water, cut, abrasion, weather, ozone and aging.
Our seawater dredge hose is designed specially to handle seawater, so our engineers choose appropriate materials for the hose. Therefore, it can be competent the job well. Besides, the diameter, length and tube thickness of our seawater dredge hose can be customized according to your requirements.
A seawater dredge hose with red flanges.
Seawater dredge hose.
Many seawater dredge hoses are on the ground.
Seawater dredge hose cross section.
Details of seawater dredge hose:
Structure: seawater dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the seawater dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20 ¡ãC to +40 ¡ãC.
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 MPa - 1.2 MPa.
Burst pressure: 1 MPa - 2.4 MPa.
The specification of seawater dredge hose
Hose code ID OD Working pressure Burst pressure Length
inch mm inch mm MPa bar MPa bar m
SWDH-01 6 152 7-1/4 182 1.2 12 2.4 24 20
SWDH-02 8 203 9-1/5 233 1.2 12 2.4 24 20
SWDH-03 10 254 11-1/5 284 1 10 2 20 10
SWDH-04 12 304 13-2/5 340 1 10 2 20 6 - 10
SWDH-05 14 350 15-2/5 390 1 10 2 20 6 - 10
SWDH-06 18 450 19-1/5 486 0.7 7 1.5 15 6 - 10
SWDH-07 22 550 23-3/5 590 0.7 7 1.5 15 6 - 10
SWDH-08 24 600 25-3/5 640 0.7 7 1.5 15 6 - 10
SWDH-09 28 700 29-3/5 750 0.7 7 1.5 15 6 - 10
SWDH-10 32 800 33-1/2 850 0.5 5 1 10 6 - 10
SWDH-11 40 1000 41-1/2 1050 0.5 5 1 10 6
SWDH-12 48 1200 49-1/5 1250 0.5 5 1 10 6
SWDH-13 52 1300 53-1/5 1350 0.5 5 1 10 6
Details of dredge hose:
Structure: dredge hose is composed of three parts: tube, reinforcement and cover.
Tube is made from the mixture of high quality EPDM and natural rubber, making the dredge hose resistant to abrasion and corrosion.
Reinforcement is made from spring helix steel wire with multiple synthetic fabrics, providing full vacuum, kink resistance and vibration dampening.
Cover is made from high quality SBR for abrasion, weather, ozone, aging and cut resistance or high quality neoprene for seawater, ozone and sunlight resistance.
Temperature range: -20
Inner diameter: 6" - 50" (152 mm - 1300 mm).
Outside diameter: 7-1/4" to 53-1/5" (182 mm - 1350 mm).
Working pressure: 0.5 Mpa - 1.2 Mpa.
Burst pressure: 1 Mpa - 2.4 Mpa.
1>.Ceramic rubber liner description:
Ceramic rubber liner is compounded by rubber sheet, flat or spherical ceramic tiles and
Steel plate through hot vulcanizing process.It is fixed to equipment surface by means of bolts
Connection. There are two types of ceramic surface:flat and spherical.Ceramic rubber liner is
High wearable, high cut-resistant, and super impact-resistant.
2>.Features of ceramic rubber liner:
High wear and cut resistance
High impact resistance
3>.Technical parameters of ceramic rubber liner:
3.1.Aluminum oxide content of ceramic:92±1%;specific gravity of ceramic :3.6±0.1;hardness of ceramic:>mohs hardness 9;color: white.
3.2.Rubber:nr; peeling strength:=25 mpa
3.3.Steel plate:q235a
3.4.Selection principles:
11077 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
Shore scleroscope hardness A: 655
Application:
Entrances
reception area
doorways
corridors
Hallways
Features:
anti-slip design which reduces the chance of people falling over
impact absorbing and hardwearing which ensures cushioning under foot
available in long lengths which avoids joins and trip points
easy to clean patterns
open design pattern which provides a good grip and is easy to clean
available in long lengths for minimal joins
soft, yet hard wearing which provides both comfort and durability
non porous surface which is easy to clean and avoids a build up of bacteria
We produce rubber sheet flooring include stud round dot rubber roll, fine ribbed, checker plate, willow, board ribber rubber sheet with anti slip feature.
HNBR rubber bladder is composed of rubber pulsation bladder,rubber balance plate and pressure plate bolt, it can reduce the drilling pump pressure fluctuations of instantaneous displacement change;
Make the pump pressure smoothly, protect equipment from damage caused by severe vibration.
the product is also used as stabilizer and vibration absorber for air pump.
Filled with nitrogen in the air or inert gas, in the absence of them,air can replace.But oxygen or combustible gas is forbidden.
Inflation pressure is 20% ~ 30% of the maximum working pressure. The advanced filling pressure is 2.0-2.5 MPa.
LC120 thermal silicone pad is a very cost-effective general economic thermal gap filling gasket, soft with its own micro-stick, easy assembly. Under low compressing force to show good thermal conductivity and electrical insulation properties. Bedding on the gap between the heat device and the heat sink or the machine shell to extrude air to reach the full contact forming a continuous thermal conduction. Using heat sink or machine shell as a cooling device can effectively increase the cooling area to achieve a good cooling purposes.
Features & Benefits:
Low cost, high efficiency, cost-effective
Replace the volatile pollution of the thermal grease
Natural sticky, easy to install, can be reused
Wide range of thickness, can fill any uneven size gap
Electrical insulation
Typical Applications:
Communication equipment
New energy vehicles / power batteries
Computer
Car equipment / charger
Switching power supply
PC server / workstation
Flat-panel TV
Optical drive / COMBO
Security equipment
Notebook computers
Video equipment
Any heating element and radiator
All products will be made according to API and related international standard as per customers' requirements.
Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost.
Material:nature rubber+EPDM
Color:any color is available
Thickness:8-15mm
Width:1.22m
Length:15-30m
Warranty:5 years
Installation:by adhesive,easy to install
Features:Waterproof,UV resistance,aging resistance,eco-friendly,non-toxic,non-pollution...etc.
Certificate:IAAF,SGS,CE,ASTM,ISO9001,ISO14001,ISO45001
Application:stadium,sports center,sports court,gym,school playground...ect.
Ultra-high thermal conductive silicone sheet is a high-performance heat conducting interface material made of 100% imported materials for fillingthe air gaps between the heating device and the heat sink or metal base.Its softness and elasticity characteristics enable it to be used for coveringa very uneven surface. Heat is transferred from the separation device or the entire PCB to the metal casing or diffuser to improve heat dissipationand improve the efficiency of heating electronic components and service
Features & Benefits:
High thermal conductivity, low thermal resistance
Soft and flexible, reducing the interface thermal resistance
High electrical insulation to protect sensitive electronic devices
Natural sticky, easy assembly, re-workable
Meet ROHS and UL environmental requirements
Typical Applications:
CPU, memory module
Communication hardware equipment
High-speed hard disk drive
Automotive engine control module
Microprocessors, memory chips and graphics processors
Military electronic equipment
High thermal conductive silicone pad is a high thermal conductivity material. The raw material is made of Japan Electrochemical High Thermal Conductive Spherical Alumina Powder and Dow Corning Polymer. It is a cost-effective thermal gap filling material. The surface's natural micro-viscosity and softness can well fill the air gaps to transfer the heat between the heat source and the heat sink to improve heat dissipation and improve the efficiency of heating electro-nic components and service life. It is an ideal thermal interface material.
Benefits:
Cost-effective, high conductivity, low thermal resistance
Soft and flexible, reducing the interface thermal resistance
High electrical insulation to protect electronic devices
Natural sticky, easy application, reworkable
Meet ROHS and UL environmental requirements
Applications:
High thermal conductivity module
new energy vehicles
Microprocessors, memory chips and graphics processors
Network communication equipment
Car equipment, charger
High-speed hard disk drive
LCG is a kind of thermal interface material which coating thermal conductive polymer on a layer of fiberglass. The stickiness of the material is slightly weakness for easy procession. And insulation and tear resistance are also better. Its stickiness and flexibility, even in extremely rough and very uneven surface, also can bring a good thermal filling effect.
Features & Benefits:
Fiberglass substrate, anti-puncture, shear and tear resistance
Only the bottom with a sticky, slightly faint on the front, easy to install
High-load, low-hardness gap filling material
Strong electrical insulation
Typical Applications:
AC / DC power supply
Car equipment / charger
Between the motherboard and the chassis
Drive control any heating element
Uninterruptible power supply (UPS)
Power semiconductor-TO packaging products
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Floating pneumatic rubber fenders have been in use for around 50 years. It is the leading device for marine application in the world. This compressed air filled rubber fender is used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB).
Florescence Pneumatic Rubber Fender Construction:
Outer rubber: rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.
Inner rubber: liner of a rubber membrane that seals the pressurized air inside the fender.
Synthetic-tyre-cord layer for reinforcement: layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender.
Bead ring: steel ring which is placed at one end (or both ends) of the fender and holds the end of cord layers
Flange opening: steel flange, which is mounted on the fender, to which an air valve or safety valve can be adapted.
Florescence Pneumatic Rubber Fender Advantages:
1. High energy absorption and with a low reaction force
2. Light weight, portable and floatable, can be installed and replaced easily
3. Heavy duty and long service life-over 10 years
4. Supplied as sling type (body only) or with chain and tire net for protection of the fender body
5. Sizes from 0.5m diameter Ã? 1.0m length up to 4.5m diameter Ã? 12m length
6. Suitable for locations with large and small tidal differences
Classification of floating pneumatic fender:
Fender types:
1.Net-type fender: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without a protection net.
Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials.Resistance high temperature of 250, shrinkage rate lower than 0.1%.
11077 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
