MBT, MBTS, ZMBT, MDB.CBS, TBBS, NOBS, DCBS.DPG, DOTG.TMTD, TMTM, TETD, TBZTD, TiBTD, DPTT.ZDMC, ZDEC, ZDBC,, ZEPC, ZBEC, TDEC, ZBPD.ETU, DETU, DBTU, DPTU.DTDM, TCY.PVI, TMQ, 6PPD, IPPD, D, A, DTPD, NDBC, BLE(BLE-C, BLE-65, BLE-75).MB, MBZ, MMB.
Natural rubber such as: SVR3L, SVR5, RSS3, SVR10, SVR20, SVR CV50, SVR CV60, RSS1, off grades.
Product : Aromatic rubber process oil ( Light & Heavy grade ) Description : Aromatic rubber process oil has the first characteristics of aromatic hydrocarbons & are having the presence of the double guaranteed combine ring carbon structure. Aromatic extracts procured from chosen refineries and appropriately homogenized to satisfy tight specifications, are used for combination batches to manufacture Tyres, calendared and moulded sheets, Tread rubber etc. Aromatic grade of rubber process oil, dark in colour. it's a primary aromatic hydrocarbon, blended with carefully selected aromatic extracts. Rubber process oil (RPO) are used during mix of rubber compounds. These help in improving the dispersion of fillers and flow characteristics of the compound during any processing. Application: It is used in the manufacture of automobile tyres, beltings, mats, shaped rubber components Etc. it's good solvency & is compatible with wide range of rubbers like NR, SBR and PBR. Packing : 20 MT flexi bags , New steel drums & Reconditioned steel drums Minimum ordered quantity : 100 MT Price offered in : FOB / CFR / CIF basis Payment terms : 30 % advance & balance against draft BL copy
Mixed rubber, modified rubber, rubber compound and rubber products.
Natural rubber raw materials: latex concentrate 60% drc (ha/ma/la), rss1, rss3, svr3l.
All types of natural rubber ), synthetic rubber (epdm, sbr, nbr, cr,), carbon black, resin, accelerators, antioxidant, retarder, t102, zno, caco3, sulphur, stearic acid, process oil, silica filler, processing additives, lubricants,gum rosin, peptizing agents, homogenizing agents, tackifiers, plasticizers, activators, sulphur preparations, metal oxide preparations, mould release agents, reclaiming agent, .
Off spec rubbers. sbr, ssbr, nbr, iir, br, epdm, cr.
cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide. Packing Size: 9 kgs. Available Forms: Powder Technical Data Sheet Product Name : JC EG - 81 Function : Filler and Acid scavenger in FKM and other rubber and plastics. Technical Name : Calcium Hydroxide CAS No : 1305-62-0 Appearance : White Powder Calcium Hydroxide % ; 97.0 Min Sieve Residue (325 Mesh)% : 0.5 Max Moisture Content % : 1 Max Mode of action : JC EG - 81 is a cross-linking activator, particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with fine particle-size magnesium oxide. Processing : It is advisable to add JC EG - 81 together with the fillers or straight afterward, As JC EG - 81 is very hygroscopic therefore should, not be weighed until just before the incorporation in the mix Dosage : Normally 6-7 PHR JC EG - 81 in combination with 3PHR Magnesium oxide Packing : 9X1Kg EVA/PP Packet per box Storage : Stored in cool and dry atmosphere Advantages cross-linking activator particularly for fluoro elastomers used to achieve optimal compression set values at higher temperatures. It is normally used in combination with a fine particle size magnesium oxide.
All Types of Rubber compounds,requiring a quick incorporation in the mix and an excellent dispersion, avoid fly loss. Packing Size: 25 kgs. Available Forms: Powder Technical Data Sheet Product Name : JAYSULF - 54 Function : Curing agent for all natural and syntheticrubbers Appearance : Light Yellow Powder (low dust) Composition : 99% Sulfur (Micronized to uniform particle size of 325 mesh), 1% Additive for low dust Mode of action : Sulfur is a curing agent for all natural and synthetic rubbers, requiring quick incorporation in the mix and an excellent dispersion, the homogeneous dispersion in the rubber avoids the occurrence of localized over-cured zones. In this way, optimal activity of the effective substance is assured. Coating of Sulfur avoids fly loss helps in keeping the environment clean. Dosage : The dosage is the same as normal sulfur Material Properties Ref to : COA Advantages Coated Sulfur will give the folowing benefits Shorter mixing time Better dispersion Reduced batch-to-batch variation Reduced Fly loss (Environment friendly)
JC CB is a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking in a limited supply of air. Carbon black is a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon Packing Size: 20 kgs. Available Form: Paste Technical Data Sheet Product Name : JC CB-D3028 Carbon Black : 28% Advantages For easy handling , Dustfree environment ,aesthetic appeal such as uniform color tone or high black jetness , or blue undertone and conductivity to improve functionality of the end-use article.
Effective as a desiccant in both plastic as well as rubber applications. Packing Size: Customized as per requirement. Available Forms: Powder Technical Data Sheet Product Name: JC CaO - T Chemical Name : Calcium Oxide (treated with1% Organic Compound) Appearance : Fine white/off whitepowder. Solubility : Insoluble in water and soluble in mineral acids Special features : JC CaO T is made from soft stone with advance calcination technology which is resulting with high surface area, high activity and low Iron content. Special surface coating enhances the dispersion in rubber and plastic applications. There will be not any unintended reaction with humidity. Mode of action : calcium Oxide binds the moisture by the formation of calcium hydroxide, hence used as a desiccant to remove excessive moisture from rubber compounds CaO is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (microwave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials. Calcium Oxide : 94% Min. So. Gr. at 25oC 3.3 + 0.1 Bulk Density (gm/ml) : 0.65 + 0.1 Al2O3 : < 1.0 % SiO2 : < 2.0 % Fe2O3 : < 0.025 % Sieve residue 325 mesh < 1.0 % Sieve residue 200 mesh : Nil Mean Parcle Size Micron (D50%) : 4.5 - 6.5 Packing : Customize packing with EVA/PP Bag.(Normally 1 Kg Pack X20 Kg or 10 KgX2 Pack /Bag) Storage : Stored in cool and dry place, moisture strictly avoided Advantages CaOT is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (micro wave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials.
Effective as a desiccant in both plastic as well as rubber applications. Packing Size: Customized as per requirement. Available Forms: Powder Technical Data Sheet Product Name : JC CaO - T Chemical Name : Calcium Oxide (treated with1% Organic Compound) Appearance : Fine white/off whitepowder. Solubility : Insoluble in water and soluble in mineral acids Special features : JC CaO T is made from soft stone with advance calcination technology which is resulting with high surface area, high activity and low Iron content. Special surface coating enhances the dispersion in rubber and plastic applications. There will be not any unintended reaction with humidity. Mode of action : Calcium Oxide binds the moisture by the formation of calcium hydroxide, hence used as a desiccant to remove excessive moisture from rubber compounds CaO is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (microwave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials. Calcium Oxide : 94% Min. So. Gr. at 25oC : 3.3 + 0.1 Bulk Density (gm/ml) : 0.65 + 0.1 Al2O3 : < 1.0 % SiO2 : < 2.0 % Fe2O3 : < 0.025 % Sieve residue 325 mesh : < 1.0 % Sieve residue 200 mesh : Nil Mean Parcle Size Micron (D50%) : 4.5 - 6.5 Packing : Customize packing with EVA/PP Bag.(Normally 1 Kg Pack X20 Kg or 10 KgX2 Pack /Bag) Storage : Stored in cool and dry place, moisture strictly avoided Advantages CaOT is preferably used in extrusion compounds which have to be cured continuously either in open air, like (fluid beds, salt baths) or in UHF curing process like (micro wave units, and hot air channels), also used in the foamed compounds to improve the cell structure and surface finish of the end product. It can be effectively used in reprocessing of thermoplastic materials
JC CURE ZBP non Staining nitrosamine-free accelerator for EPDM and other diene elastomers, used as a Secondary accelerator in the efficient vulcanization of NR and other rubbers, such as IR, SBR, NBR, and IIR, EPDM. It is used in conjunction with sulfenamide, thiazole, thiuram and carbamate. It offers very good processing safety and does not bloom, for NR demonstrates excellent reversion and heat aging resistance. Packing Size: 25 kgs Available Form: Powder Technical Data Sheet Product Name : JC CURE ZBP Chemical Name : Zinc Dialkyldithiophosphate Composition : 70 % zinc dialkyldithiophosphate and 30% silica Appearance : White Powder Storage : Store in a cool dry place away from moisture and sunlight Stability : 24 Months from date of manufacture Advantages Due to excellent dispersion and solubility a constantly high quality is achieved. Cycle times can be shortened by high crosslinking rates. Faster extrusion speeds are also achievable. Lifetimes increased due to resistance to thermal ageing. Freedom from nitrosamines and poisonous substances, solve occupational health problems.
All Types of Rubber compounds,requiring a quick incorporation in the mix and an excellent dispersion, avoid fly loss. Packing Size: 25 kgs. Available Forms: Powder Technical Data Sheet Product Name : JAYSULF-96 Chemical Composition : 96%Sulphur, 2% MgCO3 and 2 % dispersing and wetting agents Appearance : Free Flowing Yellow Powder Product Description : 1305-62-0 Appearance : 96% Sulfur (Micronized to uniform particle size of 325 mesh) is conditioned with MgCO3 and dispersing and wetting agents to produce easy and uniform dispersion of Sulfur in natural rubber and synthetic rubber and especially in Nitrile Rubber.
Latex And Rubber.
Crumb rubber and reclaim rubber.
We have Rubber Chemical Oil for machine use. Change used for solar, gas and etc. RCO is no reduced.
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Powdered styrene-butadiene rubber (SBR) is widely used as polymer modified material in road asphalt modification, asphalt ductilizer, high viscosity asphalt, hydraulic asphalt and waterproof membrane. The modified styrene-butadiene rubber powder has more special functions, besides excellent low temperature performance, it also has excellent high temperature performance and elastic recovery ability. Appearance White powder Particle size (mesh) 40 Moisture content (%) 3 Molecular content (%) 200 thousand-300 thousand Bound styrene (%) 22.5-24.5 Mooney Viscosity (ML+4) 38-68 300% Elongation (Mpa) 10-15 Tensile strength (Mpa) 21 Elongation at break (%) 320
