Specifications: Total Moisture 10 % max, Ash (db) 11 % max, Volatile matter (db) 3 % max, Total Sulphur (db) 1 % max, Calorific Value (db) 7300 kcal/kg, Net Calorific Value (db) 7000 kcal/kg, Fixed Carbon 88 % min. Size: 6-13 mm
Specifications: Moisture 2 % max, Ash 6 % max, Volatile matter 3.5 % max, Total Sulphur 1 % max, Calorific Value 6500 kcal/kg, Fixed Carbon 90 % min. Packing: in big bags, with PE inlay of 10 kg, 500 kg or 1000 kg as per customer request Size: 0-3 mm, 1-3 mm, 3-8 mm
Non-LME Registered Electrolytic Copper Cathode Grade A Cu purity: 99.99% minimum Size: 914mm X 914mm X 12mm / (36â?? X 36â?? X 0.5) Weight of each sheet: 125kgs +/- 2% Net weight of each pallet: 2M/T +/- 2% Minimum weight of each container: �± 20 M/T Gross weight of each container: �± 22.2 M/T ELEMENTS VALUE ELEMENTS VALUE COPPER Cu (min %) 99.99% SILICA (SI/ppm) 0.3 IRON (Fe/ppm) 2 COBALT (CO/ppm) 0.2 SULPHUR (S/ppm) 4 ARSENIC (AS/ppm) 0.1 OXYGEN (O2/ppm) Nil BISMUTH (BI/ppm) 0.1 ARGENT (AG/ppm) 10 MANGANESE (MN/ppm) 0.1 LEAD (PB/ppm) 0.2 TELEURIUM (TE/ppm) 0.05 NICKEL (NI/ppm) 0.2 ALUMINIUM (AL/ppm) 0.5 SELENIUM (SE/ppm) 0.3 MAGNESIUM (MG/ppm) 0.4 ANTIMONY (SB/ppm) 0.1
PP Corrugated sheets. Customized packaging from PP corrugated plastic, alveoplast, coroplast, layer pads, set inserts, foam packaging.
pure lead ingots any quantity at customer's request. 30% advance on the value of the goods, the difference will be paid upon loading. we do not provide transportation.
we can supply on monthly continous base rubber compounds all grades nylon /steel friction cord green tires new rejected tires -all more than 1000 to produced in premium tire factories michelin continental pirelli
We provide genuine and original power steering rack end bushing products. These are manufactured to the highest quality and standards in our purpose built workshops and then tested using our hi-tech equipment to ensure we provide the very best products the manufactured steering industry has to offer, as we believe nothing less will do. We are committed to your full satisfaction and strive to provide our customers with a easy and carefree shopping experience. So if you have any questions or special requests don't hesitate to contact us. Feel free to browse through our webstore items or use the search window to search for what you've been looking for. This bush is a wear item a it is the cause for many steering rack replacements but now Dabstercar Ltd. is offering a low cost solution to restore your rack to its former self. You may have replaced tie rod ends and tie rods with inner axial joints but still feeling a knocking or play in the steering, well this is likely the answer! The nearside tie rod must be removed to access this bush. The old one is simply pulled and replaced with the TFD bush. Specifications: Brand name: OMSSINI One bush required per car; New not remanufactured; Built to strict quality control standards; 100% factory tested; Extreme resistance to abrasion; Low compression set; High tear strength; Resistance to oils and solvents. Standard size - Is the factory steering rack ax. The ax should be very clean, no dust, no rust. Repair size - If your ax is damaged or presets deep rust damages, it's better to order a tighter size of the end bushing. In stock & ready to ship to you fast!
We provide genuine and original power steering rack end bushing products. These are manufactured to the highest quality and standards in our purpose built workshops and then tested using our hi-tech equipment to ensure we provide the very best products the manufactured steering industry has to offer, as we believe nothing less will do. We are committed to your full satisfaction and strive to provide our customers with a easy and carefree shopping experience. So if you have any questions or special requests don't hesitate to contact us. Feel free to browse through our webstore items or use the search window to search for what you've been looking for. This bush is a wear item a it is the cause for many steering rack replacements but now Dabstercar Ltd. is offering a low cost solution to restore your rack to its former self. You may have replaced tie rod ends and tie rods with inner axial joints but still feeling a knocking or play in the steering, well this is likely the answer! The nearside tie rod must be removed to access this bush. The old one is simply pulled and replaced with the TFD bush. Specifications: Brand name: OMSSINI One bush required per car; New not remanufactured; Built to strict quality control standards; 100% factory tested; Extreme resistance to abrasion; Low compression set; High tear strength; Resistance to oils and solvents. Standard size - Is the factory steering rack ax. The ax should be very clean, no dust, no rust. Repair size - If your ax is damaged or presets deep rust damages, it's better to order a tighter size of the end bushing. In stock & ready to ship to you fast!
We provide genuine and original power steering rack end bushing products. These are manufactured to the highest quality and standards in our purpose built workshops and then tested using our hi-tech equipment to ensure we provide the very best products the manufactured steering industry has to offer, as we believe nothing less will do. We are committed to your full satisfaction and strive to provide our customers with a easy and carefree shopping experience. So if you have any questions or special requests don't hesitate to contact us. Feel free to browse through our webstore items or use the search window to search for what you've been looking for. This bush is a wear item a it is the cause for many steering rack replacements but now Dabstercar Ltd. is offering a low cost solution to restore your rack to its former self. You may have replaced tie rod ends and tie rods with inner axial joints but still feeling a knocking or play in the steering, well this is likely the answer! The nearside tie rod must be removed to access this bush. The old one is simply pulled and replaced with the TFD bush. Specifications: Brand name: OMSSINI One bush required per car; New not remanufactured; Built to strict quality control standards; 100% factory tested; Extreme resistance to abrasion; Low compression set; High tear strength; Resistance to oils and solvents. Standard size - Is the factory steering rack ax. The ax should be very clean, no dust, no rust. Repair size - If your ax is damaged or presets deep rust damages, it's better to order a tighter size of the end bushing. In stock & ready to ship to you fast!
Titanium grade 2 ingots.
Diesel fuel injection spare parts.
Non- ferrous ingots (aluminium, brass, bronze).
Benzoic acid, salicylic acid, sodium benzoate.
Dacia logan body parts, exhaust systems, towing hooks, engine shields.
Paper cups, pizza boxes, packaging materials for food, stretch films, aluminum foils, paper towels, toilet papers, tissues, cleaning materials, trash bags.
Physical state: liquid Color: orange Odor: not available. Ph: not available. Vapor pressure: 1.6mmhg @20 deg c Viscosity: 1.50-1.90 mpa.S @25 deg c Boiling point: 232 - 233 deg c @760mmhg Freezing/melting point: -22deg c ( 30.20°f) Autoignition temperature: not available. Flash point: 96 deg c ( 204.80 deg f) Explosion limits:lower: not available. Explosion limits upper: not available. Decomposition temperature: not available. Solubility in water: 70 ppm (25°c) Molecular formula: c9h7mno3 Molecular weight: 218.1
Ceramic tiles, natural stones, marble, granite, composite..
Fibc or flexible intermediate bulk containers, PP fabric, PP bags, yarn, multifillament, loops.
Isotopic Cooper Powder 99,9999 IGAS Certified Germany Ultrafine Cooper Powder For more details contact US Europe Located
We offer 0.025 nickel wire x two reels of 25000 ml each. The price is 25 eur/ml easily negotiable. We have the possibility to increase the quantity to 1 - 3 - 6 kg depending on your requirement. We start selling with the 200g. For sale we need LOI from the buyer to complete the FCO from the seller.
