Please click here to check who's online and chat with them.

Steering Rack End Bushing - Toyota Rav 4 (Left)

Supplier From Romania
Oct-15-18

We provide genuine and original power steering rack end bushing products. These are manufactured to the highest quality and standards in our purpose built workshops and then tested using our hi-tech equipment to ensure we provide the very best products the manufactured steering industry has to offer, as we believe nothing less will do.

We are committed to your full satisfaction and strive to provide our customers with a easy and carefree shopping experience. So if you have any questions or special requests don't hesitate to contact us. Feel free to browse through our webstore items or use the search window to search for what you've been looking for.

This bush is a wear item a it is the cause for many steering rack replacements but now Dabstercar Ltd. is offering a low cost solution to restore your rack to its former self. You may have replaced tie rod ends and tie rods with inner axial joints but still feeling a knocking or play in the steering, well this is likely the answer! The nearside tie rod must be removed to access this bush. The old one is simply pulled and replaced with the TFD bush.

Specifications:

Brand name: OMSSINI
One bush required per car;
New not remanufactured;
Built to strict quality control standards;
100% factory tested;
Extreme resistance to abrasion;
Low compression set;
High tear strength;
Resistance to oils and solvents.
Standard size - Is the factory steering rack ax. The ax should be very clean, no dust, no rust.

Repair size - If your ax is damaged or presets deep rust damages, it's better to order a tighter size of the end bushing.

In stock & ready to ship to you fast!


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Steering Rack End Bushing - Toyota Rav 4 (Left)

Oct-15-18
Supplier From Campina, Ph, Romania
 
We provide genuine and original power steering rack end bushing products. These are manufactured to the highest quality and standards in our purpose built workshops and then tested using our hi-tech equipment to ensure we provide the very best products the manufactured steering industry has to offer, as we believe nothing less will do.

We are committed to your full satisfaction and strive to provide our customers with a easy and carefree shopping experience. So if you have any questions or special requests don't hesitate to contact us. Feel free to browse through our webstore items or use the search window to search for what you've been looking for.

This bush is a wear item a it is the cause for many steering rack replacements but now Dabstercar Ltd. is offering a low cost solution to restore your rack to its former self. You may have replaced tie rod ends and tie rods with inner axial joints but still feeling a knocking or play in the steering, well this is likely the answer! The nearside tie rod must be removed to access this bush. The old one is simply pulled and replaced with the TFD bush.

Specifications:

Brand name: OMSSINI
One bush required per car;
New not remanufactured;
Built to strict quality control standards;
100% factory tested;
Extreme resistance to abrasion;
Low compression set;
High tear strength;
Resistance to oils and solvents.
Standard size - Is the factory steering rack ax. The ax should be very clean, no dust, no rust.

Repair size - If your ax is damaged or presets deep rust damages, it's better to order a tighter size of the end bushing.

In stock & ready to ship to you fast!
GOLD Member
Nov-20-20

New And Used Car Engines

$500.00
MOQ: Not Specified
Supplier From Saint-Paul, France
 
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc.
DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc.
HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc.
MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc.
NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc.

SUBARU: EJ20 2000cc AT etc.
SUZUKI: M13A 1300cc AT etc.
TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc.


TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI
TOYOTA LITEACE : 7KE 1800CC
TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI
: 2NZFE 1300CC 16VALVE DOHC EFI
TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI
TOYOTA CORONA : 2YPU 1800CC
GOLD Member
Nov-20-20

Cheap Used Car Engines

$500.00
MOQ: Not Specified
Supplier From Saint-Paul, France
 
TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc.
DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc.
HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc.
MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc.
NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc.

SUBARU: EJ20 2000cc AT etc.
SUZUKI: M13A 1300cc AT etc.
TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc.


TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI
TOYOTA LITEACE : 7KE 1800CC
TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI
: 2NZFE 1300CC 16VALVE DOHC EFI
TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI
TOYOTA CORONA : 2YPU 1800CC
GOLD Member
Feb-25-25
Supplier From Busan, South Korea (Republic Of Korea)
 
Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications:
Lifting Capacity: 10,000 lbs (4,536 kg)
Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage
Maximum Reach: Approximately 24 ft (7.4 m)
Dimensions:
Height: 102 inches (259 cm)
Width: 100 inches (254 cm)
Turning Radius: 13.5 ft (4.1 m)
Frame Tilt: 9 degrees each way
Hydraulic Reservoir Capacity: 55.6 gallons (214 liters)
Fuel Tank Capacity: 44 gallons (167 liters)
Boom: Telescopic 3-stage
Steering Modes: 2-wheel, 4-wheel, and crab steering
Fording Depth: Up to 36 inches (91 cm)
Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft
GOLD Member
Mar-24-22
Supplier From Singapore, Singapore
GOLD Member
Jan-04-24
Buyer From Yeonsu-gu, Incheon, South Korea (Republic Of Korea)
GOLD Member
Feb-17-23
 
Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.

SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................
GOLD Member
VERIFIED
Jul-11-24

Full Car Cover Outdoor Waterproof

$8.50
MOQ: 500  Pieces
Sample Available
Supplier From Ontario, Canada
 
Car cover

Material: 150D oxford fabric

Size: S-XXL or customized

With strap, mirror pockets, zipper, and reflective strip

Company overview

Huaqi industrial(Member of Anma Group) is professional in the manufacture and sale of automotive supplies, automotive modified parts, auto parts. Products are exported to Europe and the United States, the Middle East, Southeast Asia, more than 40 countries and regions, currently has more than 350 agents and co-clients, mainly supply include AUTOZONE, TESCO, K-MART, ALDI, BDK, SUPERCHEAP and other internationally renowned chain stores, export business is growing. 2019 the company's total export business amount over $86 million(about RMB650million).

4 WAYS TO BUILT "ONE-STOP" SERVICE

1) Our Group company has owned 4 factories in Zhejiang to produce 30% of Car Accessories including car mats, seat covers, steering wheel covers, car covers, sunshade, booster cable, etc

2) Over 300+ high quality factories cooperated with Anma Group over 10 years relationship to provide 25% of rest car accessories.

3) Our Group company has invested over 28 factories as a shareholder to control another 30% key products of car accessories.

4) We work for factories as the exclusive export agent to help them sell and develop their products. At the same time, those factories ' products built 15% of Our Car Accessories.LE REASONS
GOLD Member
VERIFIED
Aug-21-24
Buyer From Abuja, FCT, Nigeria

Verification Status