Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note. Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note. Apart from being a very reputable oil in the field of aromatherapy, it has plenty of medicinal uses too. Letâ??s look at the most common health benefits it has in stock for us. Inhibits Microbial Growth.Myrrh essential oil does not allow microbes to grow or infect your system Product Description Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note. Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note. Apart from being a very reputable oil in the field of aromatherapy, it has plenty of medicinal uses too. Letâ??s look at the most common health benefits it has in stock for us. Inhibits Microbial Growth Myrrh essential oil does not allow microbes to grow or infect your system. It can be used to prevent many problems occurring due to microbial infections such as fever, food poisoning, cough and cold, mumps, measles, pox, and infection of wounds. It has no adverse side effects, unlike other antibiotics, such as weakening of liver or digestive malfunction. Astringent Properties Myrrh essential oil is an astringent, which means that it strengthens the gums and muscles, intestines, and other internal organs, and smoothens the skin. It also strengthens the grip of hair roots, thereby preventing hair loss. One more serious aspect of this astringent property is that it stops hemorrhaging in wounds. When this astringency makes the blood vessels contract and checks the flow of blood, it can stop you from losing too much blood when wounded. Relieves Cough Myrrh essential oil is good for cold and cough. It fights the viral infections that can cause them, as well as relieves congestion, and reduces the deposition of phlegm in the lungs and respiratory tracts.
TC100 / copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive C5 hydrocarbon resin in hot melt adhesive and rubber tire fields. In rubber tires, TC100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.TC100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, TC100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive durability and bonding strength. Product Specification: Item Test Method Unit Specification Range Softening Point ASTM-E28-58 95-105 Color ASTM-D-1544 GC 4Max Insoluble ETM-E-99 Vol% 0.05Max Acid Value ASTM-D-974 Vol% 0.2Max Specific Gravity ASTM-D-71-72A g/ 0.99-1.03 Features of TC100 C5/C9 Copolymerized Hydrocarbon Resin: Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with EVA,SIS and SBS etc. Applications:Hot melt adhesive,Synthetic rubber
WQ-869 Specification of Water Based Solid Acrylic Resin Confidential It is recommended that WQ-869 and Joncryl@HPD696 are replaceable to each other as they have the same performances (Joncryl @HPD696) WQ-869 is a high molecular composition acrylic resin which can improve pigment dispersition, maintain a fine gloss and sustain paint stability. The combination of high pigment loading and low viscosity will allow the manufacturers to strength color settlement with delicate gloss finish, meanwhile, the formulating flexibility will not be decreased in one way or another. Paint made from WangQin acrylic polymers and resins is superior to any traditional resins with regard to liquid flow, stability, gloss finish and solubility. The paint processing control and stringent quality assurance have guaranteed a consistent and reliable product quality. Whether applied to screen printing, flexo printing or gravure printing, WangQin acrylic resin is capable of ensuring superior adhesion, sharpness and color rich diversity. Those benefits are well competing with brands such as BASF, HANWHA but also providing significantly and enhanced performances and improved adds-on value for investment from cost point of view. Considering similar product performances and much more cost-effective factors, it is recommended to use WangQin Water based HANWHA: S-70, S-120, S-820, S-20 WQ-869 Key Features & Benefits: Excellent Pigment Dispersition High Transparency and Super gloss efficiency Long-life Color Endurance High Molecular Weight General Information: Classic Physical Characteristics Appearance Transparent Solid Solid Content >99% Acid Value 215 Softening Point() 155 Average Molecular Weight 16500 Tg ( 102
Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120 150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110. 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
One-part Waterborne Epoxy Ester Resin WL-172 epoxy coating contains the following added features: Extremely Long Lasting Flexible & Durable Water resistant High-Gloss Heat Resistant Economical Reduces Maintenance Costs Lead-free Nontoxic Rustproof One Application Only Acid & Saltwater Resistant Protects Against Environmental Hazards High Adhesion 1,Product Composition: Waterborne Epoxy Ester Resin, Cosolvent, Neutralizing Agent, Water 2,Typical Date Type of polymer Waterborne epoxy ester resin Non-volatile(%) 70�±2 Viscosity( 25â??, mpa*s) â?¤200* PH ---- Neutral.agent DMEA OH value on solids (mgKOH/g) ---- Air dry Applicable (Oxidation Cross-linking) Cross-Linking with amino resin Inapplicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3,Product Properties: Excellent anticorrosion performance, especially for the preparation of anti-rust base coating; Fast drying speed, good hardness; Excellent salt fog-spray resistance and early water resistance: Good storage stability; Excellent shear stability, can be grinded with dispersions directly. 4,Instructions: WL-172 can be diluted with deionized water or lower alcohol or alcohol ether to white emulsion. It can be dried by oxidation cross-linking addingoily/water driers at normal temperature or low-temperature baking. The oily driers need to be diluted by the solvent such as butyl alcohol or ethanolfor use. The water dispersion of WL-172 is stable at neutral or slight alkaline conditions pH value has to be carefully observed in coating production sinceprecipitation may occur if acidic pigments like carbon black are used in the system. PH value of the coating system can always be adjusted triethylamine or N, N-dimthylethanolamine. Viscosity of the dispersion will increase as the PH value increases. 5,Applications: Air-drying or low temperature baking antirust coatings. 6,Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Rider Vivan Brand New Dark Cherry Rawhide Hand-Braided Romal Reins. Specially Hand-Crafted by Our Braiding Experts. Reins Are 16 Plaits & Romal Is 16 Plaits. Rein Part Is 55" Long Which Includes 3" Bit Loops. Romel Is 55" Which Includes The 10" Leather Popper. An Overall Length Of Product is 9' 4". These Reins Are Firm And Will Hold A Nice Drape In The Reins.
PL Series are polyester resin based thermoplastic pigments used for Plastic coloring / Masterbatch applications and are compatible with most polymers except PVC. The recommended usage temperature ranges from 130-240 °C. HTR Series are polyamide resin based thermoplastic pigments which offer improved properties as compared to PL series especially, very low mould plate out, heat resistance (up to 280 C brilliance etc.)
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric â?¥2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
Supplier in Bengbu, China D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
Product Name Weak acid cation exchange resin (Macroporous) Sanxing Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g)
A type of basic liquid epoxy resin. It is colorless and light yellow viscous liquid with low toxicity. It is mainly used in coating,adhesive,antisepticising,electric insulation.Laminated plates and potting fields as well as the raw material for high-grade epoxy resin processing. Brand : CYD-128 Epoxy eqiovalent(g/eq) :184~194 Hydrolysable chlorine,wt% : 0.1 Viscosity (mPa2C) :11000~14000 Volatile,wt% : 0.2 Color(Gardner) : 0.1 Brand : CYD-127 Epoxy eqiovalent(g/eq) :180~190 Hydrolysable chlorine,wt% : 0.1 Viscosity (mPa2C) :8000~11000 Volatile,wt% : 0.2 Color(Gardner) : 0.1 Brand : E-44 Epoxy eqiovalent(g/eq) :210~240 Hydrolysable chlorine,wt% : 0.3 Viscosity (mPa2C) :11000~14000 Soften-ing point(C) :12-20 Volatile,wt% : 0.2 Color(Gardner) : 0.1
1. Description D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
