ZL series of Single-stage Transformer Oil Treatment Equipment is case-hardened product of electric power industry. It is researched according to the newest drying theory and precisely filtering technology for disposing unqualified insulation oil of electric department and other enterprises. It is an ideal equipment used in drying and making vacuum oil injection. ---Usage: It is widely used in power plant, hydropower station, electric power company, metallurgy, petrifaction, railroad, etc. It can purify unqualified transformer oil, mutual-inductor oil, switch oil and capacitor oil, also rapidly dehydrate, degasify and purify oil. Meanwhile, it also has the function of drying electric machine and injecting oil to electric equipment. ---Characteristics: A: Super dehydration and degasification system. We adopt large cubage to rapidly separate water and gas from oil. B: Reliable heating system to ensure heating and stable oil temperature. C: Precise filtration system adopts high-grade filtration materials which has advantages of good mechanical intensity, multi-level filtration, gradually intensive and high filtration precision system. D: Advanced pressure protection device and infrared control system can avoid the influence of wrong operation. E: Integration has chain security protection. It can automatically control the oil pressure and oil level. F: This machine can be used with BZ series of transformer oil discoloring device together to add the function of acid-removing, discoloring, uncombined carbon removing, and reducing damage. Technical Parameters Model ZL-20 ZL-30 ZL-50 ZL-70 ZL-100 ZL-150 ZL-200 Rated Flow L/min 20 30 50 70 100 150 200 Vacuum Range -0.05 -0.099Mpa Temperature Range 60¬ 80 Degree centigrade Oil pump pressure 0.05-0.3Mpa Total Power kw 25 25 32 32 42 50 60 Breakdown Voltage 54kv Power 50HZ 380V Working Noise 65 80 db(A) Cleanliness NAS 6 NAS1638 Water content in oil 5ppm Gas content in oil 0.1% Filter precision 5um Inlet (outlet) diameter mm 33 33 48 48 60 60 60 Dimension mm L 1100 1100 1200 1250 1300 1400 1550 W 700 700 800 850 900 1000 1200 H 1300 1350 1400 1450 1520 1600 1800 Attention:Dimension and weight will be changed with changing the technical specification.
LY series plate pressure oil purifier is mainly used to separate the impuritys and water from the oil. It is suitable for filtering the cooking oil, transformer oil, used lubricating oil and so on. There is filtering media, such as filtering paper or filtering cloth, installed between the plastic filter board and filter plate that will be fixed to form a single filtering room under the pressure of the packing device. The filtering paper or filtering fuse packed between the filter board and filter plate will play a role of filtering. It's characterized by simple structure,easy operation,low cost,etc. Technical Parameters Type LY-30 LY-50 LY-100 LY-125 LY-150 LY-200 LY-300 Rated Flow L/min 30 50 100 125 150 200 300 Working Pressure MPa 0 0.5 Filtering area ¡ 0.8 1.1 1.5 1.8 2.0 2.5 3.1 Plate Size mm 280 280 Compaction Method Manual screw clamping Number of Filtering Frame 11 13 17 23 25 34 41 Number of Filtering Plate 12 14 18 25 26 35 42 Power 380V 50HZ Power of Motor(KW) 1.1 1 5 2 2 2 2 3 4 5 5 Rotating Speed r/min 1440 Filter Precision m 5 Size of Filtering Cloth mm 300 300 Oil Inlet (outlet ) Diameter mm 32 32 42 42 50 50 60 Apparent Size mm Length 700 800 850 850 950 1200 1400 Width 410 530 530 600 600 600 600 Height 800 930 930 1100 1100 1100 1100 Total Weight kg 80 95 130 190 210 250 300 Attention:Dimension and weight will be changed with changing the technical specification.
Usage: JL is fit for oil-using departments and corollary equipments. It can be used in the filtration of mechanical impurity, high-lift and long-distance oil pumping and injection. Suits all kinds of oils. Characteristics: ---This type of machine filters by three steps whose filtering elements gradually become intensive. It doesnt need filter paper with several advantages such as: portable, easy-handling and environment protection .etc. It can not only filter the impurities in oil, but also satisfy the high-lift and long-distance oil pumping and injection. Technical Parameters Model JL-30 JL-50 JL-70 JL-100 JL-150 JL-200 JL-250 JL-300 Flow L/min 30 50 70 100 150 200 250 300 Lift 5m 8m 8m 10m 12m 15m 15m 15m Filter precision 5 µm 5 µm 5 µm 5 µm 5 µm 5 µm 5 µm 5 µm Total Power (kw) 0.55 0.75 1.1 2.2 3 3 4 4 Power 3PH 50HZ 380V inlet (outlet) diameter Made according to the custor demand mm Dimension L 560 650 650 1200 1200 1250 1250 1250 W 450 500 500 450 450 580 580 580 H 450 500 500 1050 1050 1150 1150 1150 Weight KG 22 31 42 51 72 91 112 135 Attention: Dimension and weight will be changed with changing the technical specification.
It currently adopts the most advanced principles of Coalescence-separation in world, collecting filtration precision and efficient demulsification and dehydration in one, can remove a large amount water without heating the oil, can fast separate water from the oil that has the equal amount of oil and water, and after treatment the cleanliness level up to NAS6, the water content in oil up to 50ppm, it is not easy to rust when use the oil after filtration to clean the bearings, lower costs, the oil can be reused, compact design, simple and easy to operate. Basically it is non-wearing for parts, low maintenance costs, small energy consumption, and the trolley-style design is convenient for the movement of equipment. Working Principle Coalescence separator is equipped with two different functions of the filters inside - separation filter and coalescence filter. the medium for dehydration go through the import of coalescence separator into the filter shell, and the filter tray distribute it to of each coalescence filter, liquid flows from inside to outside of coalescence filter, after filtration, emulsion breaking, coalescence, and sedimentation four process, the liquid demulsify the emulsion, and then after demulsification the droplet water form the large big one and subside at the bottom of the shell. Part of the droplet water with the liquid flow into separation filter, the filter is made up of a special filter material with good water-repellent performance, small drops were completely and effectively blocked outside of the filter, and form bog drops again to subside, so as to ensure effective removal of water. The water subside at the bottom of the shell can be shown by the lever meter, so that the water and dirt can be removed out by the drainage valve from time to time. The media after separated water will be collected by separation filter tray, and flow out from export of the separator. Technical parameters Items Unit TLA-10 TLA-20 TLA-30 TLA-50 TLA-70 TLA-100 TLA-200 Flow L/min 10 20 30 50 70 100 200 Working pressure Mpa 0.3 Water content in oil PPM 50 CLeanliness NAS 6级 Working noise dB(A) 55 65 85 Power KW 0.75 0.75 0.75 2.2 2.2 3 6 Dimension mm 700 700 700 800 800 1000 1500 570 570 600 650 650 700 1000 550 600 650 750 800 850 1200 Weight KG 100 110 130 150 160 190 260 Dimension and weight will be changed with changing the technical specification.
It is widely applied to phosphate ester fire-resistant oil system and mechanical equipment (oil filter machine). Features: 1)The purifier is a next-generation vacuum oil filter machine destined for phosphate ester fire-resistant oil system, utilizing dewatering and degassing technologies such as anti-precipitation, aggregation, separation, transformation, resolution, vacuum entrapment and flash evaporation, which not only speedily removes the free water in oil but also intensively removes the dissolved water and gas in oil. 2)The stage-to-stage dandified filter element made of new composite materials can remove the large amount of impurities in oil and reach the purpose of precision filtration. 3)Application of new absorptive materials can effectively absorb the jelly substance in oil, eliminate the acid content in oil,and inhibit the production of new acid in the system. 4)The purifier body is made of anti-acid,anti-dissolving and stainless steel.The filter elements and seals are made of fire-resistant oil materials.. Technical Parameters Model KL-10 KL-20 KL-30 KL-50 KL-70 Rated Flow(L/min) 10 20 30 50 70 Vacuum Range -0.05 -0.099Mpa Temperature Range 40 65 Oil pump pressure 0.05 0.3Mpa Power Supply 50HZ 380V Total Power 20 kw 27 5 kw 35 kw 49 kw 65 kw Working Noise 80 db(A) Gas content in oil 0.1 % mgkoH/g Water content in oil 400ppm Cleanliness NAS 6 Mechanical impurity no Dimension(mm) 600 480 850 700 480 900 800 480 950 900 500 1000 950 500 1000 Attention: Dimension and weight will be changed with changing the technical specification.
Waste Oil Refinery Machine can be used in black engine oil, crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again. Systems of equipment Reaction tank: raw material will be pumped into this tank from the primary filter . Heating system: by burning fuel oil ,gas or coal to make the oil temperature up to setting value. This system equips with insulation system. Catalytic system: raw material reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition. Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials. Temperature control system: ensure that raw material transform into gasoline and diesel oil, raw material drying by distillation, can stop heating timely. Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards. 3.Index of oil after treatment: Yield diesel oil : 86-88%, gasoline oil: 5-6%, oil residue: 6-8%. Low-speed diesel engine can be used directly.
The main function of Lubricating Oil Purifier is to purify the contaminated lubricating oil, motor oil, gear oil, hydraulic oil, compressor oil, turbine oil and restore its original performance, it is a professional oil filtration machine. In the purification processing the filter residue accumulation, resistance increased, flow rate slow, should stop work to cleaning residue. When Lubricating Oil Purifier removes impurity, pay special attention to filter on the stainless steel wire mesh deformation or damage, otherwise, when installed filters again, the purity of the filtered medium can not meet the design requirements, compressor, pump, instruments and other equipment will be destroyed, once found that stainless steel wire mesh deformation or damage should be replaced immediately. The filter element of Lubricating Oil Purifier is composed of special materials, is easily damaged parts, need special protection; When fine filter work after a period of time, the filter to block a load of a certain amount of impurities, the pressure will increase, flow rate will decline, need to remove the impurities in the filter system in time, at the same time to clean the filter element.
Turbine oil is usually use in gas turbines, and other applications requiring supreme quality turbine oil. Turbine oil cleanliness continues to cause concern because to have optimum performance the oil has to be significantly clean. The current inventions of Turbine Oil Purification Plant are widely categorized under different types of filtration methods depending on its objectives or applications. The existence of iron components in industrial turbine oil makes magnetic filter is the effective tools for capturing as well as recycling of small sized magnetic particles. Turbine oil correction can be quite exhaustive and detailed in nature. Series TOP Turbine Oil Purification Plant is special designed for turbine oil, lubricating oil and cooling oil to removing a large amount of moisture and impurity. Such as power plants, power station steam turbine in the process of running, moisture, dust and impurities will be mixed in the turbine oil, will accelerate the oxidation of oil, and changed with foam, fouling and oil sludge, cause the oil emulsified serious, and lead to oil-water separation more difficult, reduce the oil performance of lubrication, speed, cooling etc. Meanwhile caused the metal parts of turbine steam to corrosion, bad for the safe operation of steam turbine. So TOP Turbine Oil Purification Plant is a special maintenance equipment for power plant and power station.
DVTP Double Stages High Vacuum Transformer Oil Filter Machine has a high pumping rate of two-stage vacuum system, a unique degassing, dehydrating function, using the most advanced three-dimensional double-flash technology, fast and efficient removal of oil in liquid water, while double precision multistage comb filter can efficiently remove oil in the water, gas, particulate impurities, acidic substances and oil oxidation products, thus improving the dielectric strength of the transformer oil, to reduce the acid value of the oil and dielectric loss, to ensure the safe operation of oil-filled electrical equipment. DVTP Double Stages High Vacuum Transformer Oil Filter Machine is mainly composed of inlet valves, strainers, heater, solenoid valves, vacuum tank, low vacuum degassing member, high vacuum degassing member, low condenser vacuum, high vacuum condenser, vacuum pump, roots pump, filling the vacuum solenoid valves, rotary vane vacuum pumps, circulating cooling water pumps, water tanks, floating ball valve, exhaust pump, check valve, a fine filter, two fine filter, oil electric control valve system components.
VTP Vacuum Transformer Oil Filtration Treatment Machine can satisfy the installation or maintenance field of transformer for pumping air into vacuum state, and at the same time complete the transformer oil degassing, dehydration processing, shorten the oil processing period. VTP Vacuum Transformer Oil Filtration Treatment Machine combines oil precision filtering, high efficiency of dewatering, degassing, vacuum stereo evaporation technology and automation control technology at an organic whole, the operation is simple, safe and reliable. Features: 1.High filtration precision holds much of sludge, remove the fine particulates out from the oil. 2.Unique degassing, dehydrated material, its evaporation area one hundred times larger than conventional materials. 3.The Transformer Oil Filtration Treatment Machine has the characteristics of small dimension and high efficiency, convenient movement, particularly suitable for live working in site. 4.The vacuum Transformer Oil Filtration Treatment Machine use the advanced fuzzy oil temperature control system , the oil temperature upper and lower bounds can be arbitrary set , make the oil temperature to be interval control. 5. The vacuum Transformer Oil Filtration Treatment Machine adopts high automatic degree and the oil temperature level to realize automatic control and automatic protection, safe and reliable, simple operation and convenient.
We has developed DST Insulating Oil Dielectric Strength Tester according to International standard IEC156, which is developed especially for measurement of insulating oil breakdown voltage. The dielectric breakdown is an indication of the oil ability to withstand electrical stress. The oil sample is placed in a test cup and an AC voltage is impressed on it. The electrodes are two discs, exactly 1 in. in diameter and placed 0.10 in. apart. The voltage is raised at a constant rate, until an arc jumps through the oil between the two electrodes. The voltage at which the arc occurs is considered the dielectric strength of the oil. DST automatic Insulating Oil Dielectric Strength Tester is unique in the market due to its functionality and the excellent user benefit in comparison to costs. The transformer oil tester provides delivers clear and reliable measurement results. It is no longer necessary to send samples to the laboratory. Environmental and transport influence on the samples are minimized. Due to its design, the tester is particularly handy, easy to operate and especially excellent to use under tough ambient conditions. By proper programming, DST Insulating Oil Dielectric Strength Tester has got functions of auto boosting, step down, stirring, display and print out. Portable type is available for performing both levels of this test in the field.
Fason waste lubricant oil distillation plant is a newly developed product which combines dozens of our latest technologies. It is able to rapidly extract light and heavy distillates from different fractions by given different temperatures control along with our own formulated catalyst compound. It can also remove the metallic compound, base nitrogen, sulfur etc. From distilled oil during re-refining process. The end product after distillation could be adjusted into either new base oil or golden diesel fuel according to the customer demands.
Used engine oil, used, new transformer oil, used, new hydraulic oil, furnace oil, mixed hydrocarbon oil, flushing oil, base oil , fuel oil , rubber processing oil, used cooking oil.
Oil & gas, petrochemical, palm oil.
Used lub oil, used engine oil, marine slops / sludge, lubricant, slop oil, waste oil, light crude oil.
we are looking for serious buyers BITUMEN GRADE 60/90 TRIAL QUANTITY 30,000 METRIC TONS CONTRACT QUANTITY: 200,000 METRIC TONS (MONTHLY) CIF - PRICE: PER METRIC TON (GROSS USD$:130.00 / NET USD$:120.00) COMMISSION: USD$:10.00 PER MT (BUYER SIDE/SELLER SIDE (50%/50%) TERMS OF PAYMENT SBLC-MT760/DLC MT700 OR 2% PRODUCT VALUE VIA MT103 PERFORMANCE BOND 2% PB AGAINST MT760 SBLC, APPLICABLE TO CONTRACT ONLY INSPECTION: SGS, CCIC, SAYBOLT, INTERTEK OR SIMILAR BY SELLER SPECIFICATION: INTERNATIONAL EXPORT STANDARD
Aero parts, sudan crude oil.
LPFO, crude oil, a1 jet oil, agro products.Clearing agent, transportation and shipping
Automotive, Industrial, Marine Lubricants, Hybrid Green Tech, Bitumen, Base Oil, White Oil, Petrochemicals..
Petroleum products , crude oil, palm oil production.Exports
