We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
LPG GAS GOST 20488-90
Maximum : 100,000 MT/Month
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
En590 10 , d6 , naphtha , jetfuel, nigerian crude, petcoke, and iron ore ( mexico origin ).
Safety matches, agarbatti, wax matches, candles paraffin wax, slack wax, residue wax.Merchant exporter, importer
Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots.Brokering services
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
EQUINAS NBO 60u High Quality Naphthenic Base Oil EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It is characterized by its composition of saturated cyclic hydrocarbons called naphthene. Applications: Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants Features and Benefits: Low-temperature fluidity: Naphthenic base oil has a low pour point and excellent low-temperature fluidity, making it suitable for use in cold environments. Good solvency: Naphthenic base oil has good solvency, which allows it to dissolve additives and other chemicals that are added to lubricants and other products. Good oxidative stability: Naphthenic base oil has good oxidative stability, which means it can resist degradation caused by exposure to oxygen. Thermal stability: Naphthenic base oil can withstand high temperatures without breaking down or forming deposits. Compatibility: Naphthenic base oil is compatible with a wide range of other materials, including elastomers, seals, and metals. Environmental advantages: Naphthenic base oil is a naturally occurring substance, and its production process generates fewer harmful emissions and waste products than some other types of base oils. Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene. Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants
EQUINAS 8 is a high-quality Group III base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 8 is an excellent choice for formulating high performance engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 6 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 6 is an excellent choice for formulating high performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 4 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 4 is an excellent choice for formulating high-performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
En 590 diesel, jet a1 fuel, medical supplies, fisheries.
Intermediaries of petroleum products directly from the refinery(s) ..
Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products.
Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen, bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid) automotive & industrial oils & lubricants (manufactured to every specific blend / brands ) waste food solutions aluminum used beverage cans (ubc) / aluminum ingots.Logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers. we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
SCO of WTI @ -1.00$ of Nymex send LOI and CP, Must be RWA and hold title to funding.
Bitumen, a highly viscous and black hydrocarbon, plays a crucial role in civil engineering due to its remarkable properties and versatile applications. As a binder in asphalt mixes, it provides durability, strength, and resistance to traffic and climate-induced stresses. Commodity: Bitumen Grades 35/50, 40/50, 50/70, 60/70, 70/100, 80/100 & VG3 Quantity available: Min 100MT and Max 50,000 MT/ Month. Packing: New steel drum, 110 drums fitted in 20ft' container A) Steel Thickness: 0.6 MM B) Height :980 MM C) Diameter: 50 CM Terms of Payment: Irrevocable, Confirmed, Non-Transferable LC 100% at Sight via Dubai OR 30% Cash in Advance and 70% balance against Custom Clearance Documents.
