Material: FR4 Layer: 1 Thickness: 0.8mm Surface treating: HAL lead free Solder mask: BLUE Min. Line/Space: 0.2mm Min. Hole: 0.3mm Lead Time: Only 2 days S. 5 m2, 10 days Profiling: Routing Copper: 1oz Electronical Test
Complete products contract pcb assembly and manufacturing service Circuit boards: 1 to 22 layers pcb layout, fabrication, and pcb assembly and box build
Pcb
Material : fr-4(high tg) Board thickness : 0.062" Layers : 6 Trace width/space : 5 mil/5 mil Via holes : 12 mil Application : sound system Vacuum package
$60 and 3 days ----- 10 pcs 2 layer pcb sample within 15 square inch! $200 and 6 days ----- 10 pcs 4 layer pcb sample within 15 square inch!
Rigid PCB Specifications: Basis Material: FR4 / Tg170 Board Thickness: 1.6 mm Layer Count: 1-18 layers Surface Finish: Immersion Tin Immersion Gold / HASL Finished outer Cu: 2 OZ Finished inner Cu: 2OZ Solder resist colour: Green Ident colour: White Special: BGA / Gold Finger
Layers: 2ú¡30(layers) Min line width 4mil Min line space 4mil Impedance control ía5% Akeson circuit co., ltd was founded in 1998, which located in shenzhen guangdong province in china. It is engaged in professionally servicing and manufacturing high-precision pcb products
Embedded tiny high power poe pse module Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design. Below are the key features of pse-hqd Ieee802.3af compliant. Per port maximum output pse-hqd, 650ma. Pse-hqd supports high power mode and backward compatible to normal power mode. Maximum total power protection. Support pd power classification from class 0 to class 4. Per port over/under voltage protection. Per port short circuit protection. Per port over current protection. Thermal cut off. Equip common mode choke (per port) to reduce emi. Enhance current surge protection. Per port pse status indication. 1.Tiny size 92mm(l)x 25.1mm(w)x24mm(h)
Embedded normal power poe pd module Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design. Below are the key features of pse-qd 1.Ieee802.3af compliant. 2.Per port maximum output pse-qd, 450ma 3.Maximum total power protection. 4.Support pd power classification from class 0 to class 4. 5.Per port over/under voltage protection. 6.Per port short circuit protection. 7.Per port over current protection. 8.Thermal cut off. 9.Equip common mode choke (per port) to reduce emi. 10.Enhance current surge protection. 11.Per port pse status indication. Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information. 1.Tiny size 92mm(l)x22.1mm(w)x24mm(h)
12w output embedded poe pd module(tpd-50) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-50 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h). F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
Name 6-layer Main Board for Industry Control Model 6-layer Details 1 Line Width/Space4/4mil 2 Min Hole Size0.3mm 3 Solder MaskRed 4 ViasBGA filled with ink 5 Impedance ControlSingle 50ohm,differential 100ohm
Name Special Material Board Model 2-layer Details 1 Material PTFE 2 Board Thickness 0.5mm 3 Line Tolerance +/-1mil 4 Finish Immersion Gold
ISO9000, ISO14000,UL certifications
16W Output Embedded PoE PD module(THPD-33) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. Below are the main features of thpd-33 modules A.Isolated pd module, isolation level 1.5kv B.Backward compatible ieee802.3af C.Support wide input voltage range, 36vdc to 55vdc. D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33) E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space. High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules. 1.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
12W Output Embedded PoE PD Module(TPD-12) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-12 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h)) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
Production capacity: SMT: 260 million points per month AIM:70 million points per month PCBA: 16,000 pieces per day
A400P22 is an A400P card bundled with 2 FXS-100 and 2 FXO modules. User could choose any of combinations of openVox FXO-100 or FXS-100 modules according to the business requirements. A400P22 has 2 FXS100(green) and 2 FXO100(red) modules pre-installed. Key Features: * Scalable: Just add additional cards to extend system. * Easy to use : Full software and hardware compatible with Digium's TDM400P. * Exchangeable with Digium daughter cards: It is mixable with Digium's X100M/S100M. * Rohs Compliant.
B200P is a PCI 2.2 compliant card supporting 2 BRI S/T interfaces, with a onboard multi NT powerfeeding circuit. NT/TE mode can be independently configured on each of the 2 ports. B200P can be used to build Asterisk based systems such as ISDN PBX and Voip gateway¡. Target applications: High performance ISDN PC cards ISDN PABX for BRI VoIP gateways ISDN LAN routers for BRI ISDN least cost routers for BRI ISDN test equipment for BRI Features: Two integrated S/T interfaces ITU-T I.430 and TBR 3 certified and S/T ISDN supporting in TE and NT mode Integrated PCI bus interface (Spec.2.2) for 3.3V and 5V signal environments DTMF detection on all B-channels Multiparty audio conferences bridge Onboard power feeding PCM bus connectors daisy chaining Each of the 2 ports can be independently configured for TE or NT mode Application ready: Use Asterisk to build your IP-PBX/Voicemail system Rohs compliant Certificates: CE and FCC Five Year Warranty!
D410P supports E1, T1 and J1 environments. It is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipments and allows inexpensive T1 channel banks to connect with E1 circuits. With the improved I/O speed, the card reduces CPU usage and increased card density per server. D410P is fully compatible with Asterisk applications. The open source driver supports an API interface for custom application development. D410P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported. Other Features includes: Support for both 3.3V and 5V PCI slots. High Performance PCI BusMaster with up to 2Kbytes FIFO Easy to install: Use wct4xxp driver included in original Zaptel without any patch RoHS compliant Certificates: CE and FCC Five Year Warranty!
PCB
