Material:
1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting.
2, Core: nontoxic polyethylene. low denisty
3, The back side: aluminum alloy sheet coated with polyester resin primar painting.
Specification:
1, Standard size(widthxLength) : 1,220 x 2,440mm
2, Aluminum composite panel thickness:2, 3, 4, 5 mm.
3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm
4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc
Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested
5, Nonstandard sizes are available according to customer's requirements.
Material:
1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting.
2, Core: nontoxic polyethylene. low denisty
3, The back side: aluminum alloy sheet coated with polyester resin primar painting.
Specification:
1, Standard size(widthxLength) : 1,220 x 2,440mm
2, Aluminum composite panel thickness:2, 3, 4, 5 mm.
3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm
4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc
Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested
5, Nonstandard sizes are available according to customer's requirements.
Alucobest aluminum composite panel is a new decorative material used ever increasingly by developers, designers and architects world wide for various applications. The advantages of using this material over conventional material like stone, tiles and paint are far too many.
Alucobest aluminum composite panel also known to many as sandwich panel consists of a polyethylene core sandwiched between two aluminum sheets. These panels are very versatile and can be used in many applications. The entire panel consists of 3 main layers.
The top aluminum sheet is coated with either polyester or PVDF paint. The core is either normal polyethylene based or a fr (fire-resistant) core which is specially treated for fire resistance. The bottom aluminum sheet comes in either mill finish or if customers require we can provide a thin layer of polyester paint coat with (6~8um) backside paint
Chensheng series aluminum composite panel contain five large categories of interior wallboard, facade panel, wood panel, granite veins board and fireproof board. Chensheng aluminum composite panel adopted anti-rust alloy aluminum plate and high strength polyethylene core board of superior quality. External coating mode of panel is polyester resin or presently internationally most advanced polyester resin paintings dressing , it can stand the test of various kinds of powerful weather and keep its superior quality.
Standard size:
1220(width) *2440(length) *3(thickness)mm
1220(width) *2440(length) *4(thickness)mm
Special size:
Thickness: 2mm, 5mm, 6mm
Width: 1000mm, 1250mm, 1550mm
Maximum length:6000mm.
ACP application:
Building exterior curtain walls
Decoration of interior walls, display platforms
Renovation and reconstruction of old buildings
Billboard, signboards and advertisement boards
Industrial materials and bodies of automobiles
Balcony, fence, indoor compartments.
1.12 port, Length:10"
2.Height:1U
3.High reliability and superior performance
4.Meet T568A/B standards.
5.With plastic mount, mounting to the wall. Screws included
*Features:
1.Each port is 100% tested to ensure NEXT and return loss performance
2.individually serialized to support traceability;
3.Utilizes 110 punch down termination on back panel and includes retention cap for each port;
4.Each port contains a universal label that is color coded for T568A and T568B wiring schemes;
5.Terminates 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable;
6.Optionally mount to standard EIA 10" rack.
Individual package:1pc into polybag, then into white /brown box.
Export carton package: 10pcs/carton, G.W/N.W:14/13kgs,carton size:51.5*29*31.2cm.
Metal Clad Switchgears
SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards.
SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards.
3mm sheet steels
LSC 2B class Loss of Service Continuity
Pm Partition Class
AFLR Internal Arc Classification
4 earthed accessible compartments
Maximum personnel safety with 31.5 kA/ 1 s internal arc test.
Safety electrical and mechanical Interlocking systems.
Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing
General Production Range and Specifications
Rated Voltage : 3.640.5 kV
Power Frequency withstand Voltage : 1085 kV
Lightening Impulse withstand Voltage : 40185 kV
Rated Frequency : 50/60 Hz
Rated Current ( natural ventilation ) : 6303150 A
Short Circuit withstand Current : 1631.5 kA ( 3 s )
Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features
2 mm sheet steel
LSC 2A Loss of Service Continuity
Pl Partition Class
AFL Internal Arc Classification
3 earted accessible compartmments
Maximum personel safety with up to 25 kA / 1s internal arc test
Safety electrical and mechanical Interlocking systems
SF6 gas insulated Circuit Breaker allows fast and easy servicing
Grounding systems with ensured continuity.
General Production Range and Specifications
Rated Voltage : 3.640.5 kV
Power Frequency withstand Voltage : 1085 kV
Lighting Impulse withstand Voltage : 40185 kV
Rated Frequency : 50 / 60 Hz
Rated Current : 6301250 A
Short time withstand current : 16/20/25 kA ( 1 sec )
Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
Aluminum honeycomb plate's surface is aluminum alloy sheet treated by fluorocarbon roll-coating, and its middle is the aluminum honeycomb accordant with international aviation standard.
"Qin Feng" brand honeycomb panel specifications:
1.Thickness: 6mm-50mm
2.Al :0.5-2 .0 mm thick
3.Width: maximum width of 2150mm can be processed to
4.Length: any length
5.Color: see color card (available upon request to do a special color)
6.Core: aluminum honeycomb core a3003
7.Finish: fluorocarbon coating.
"Qin Feng" brand honeycomb panel application:
1.Buildings and building structure: the roof, facade and wall cladding, ceiling / partitions / doors, interior {walls, floors}
2.Elevator: bridge hand backplanes, siding, roof
3.Exhibitions: exhibition, display card production, store decoration
4.Transport industry: commercial vehicles [envelope, hand at the end], {bilge version ships, bulkheads}, rail, railway vehicles {backplanes, panel} public, special transport vehicles {container, volume, transportation tank}, aircraft industry
"qinfeng" aluminum honeycomb panel features:
1.Strength.
2.Stiffness.
3.Light weight.
4.Good surface flatness.
5.Fire performance: b-level and a2 level.
6.Noise effects: the amount of air noise 29db.
7.Good insulation: thermal conductivity 0.1613w / (m.K).
8.Surface paint by roller coating technology: use of ¡ý 70% of the fluorocarbon paint, weathering the wall, with a self-cleaning ability.
9."qin feng" brand aluminum honeycomb board has a good temperature resistance: depending on the location, uh environment to be used in -40 ¡æ +80 ¡æ, special requirements, can reach 180 ¡æ.
10."qin feng" brand aluminum honeycomb panels without separation or classification can be completely recycled.
Cool goal panel is composed of a polyethylene (pe) core between two aluminum sheets, and coated with polyester resin or extra-durable PVDF (fluorocarbon) resin as a composite structure with excellent character such as fire proof, water proof, heat-insulated, sound-insulated and resistance against corrosion, pollution and wear.
Standard size:
1220 (width) x2440 (length) x3 (thickness) mm
1220 (width) x2440 (length) x4 (thickness) mm
Standard color:
30 kinds
Special size:
Thickness: 2mm, 5mm, 6mm
Width: 1000mm, 1250mm, 1550mm
Maximum length: not more than 6000mm.
Application:
--> wall curtain, cladding and facade
--> roof edges and parapet wall
--> dado, separation wall and partition
--> advertising plate, showroom and shop front signing
--> column covers and beam wraps.
Two same thickness cover aluminium sheets sandwiching the pe core, front aluminium sheet could be PVDF coating or Polyester coating,PE core is hardly inflammable.
Made from quality aluminium alloy plate, face plate is coated with PVDF baking paint of PPG or Akzo Nobel,the whole panel can be formed to different shapes,such as arc,sphere and tower,etc.
Motor Control Centre (MCC Panel) having: Incomer: 630A MCCB
Cyclic Timers Star Delta Starters: 30 HP - 3 nos.
20 HP - 3 nos.
DOL Starter 1-5 HP - 16 nos.
MCCB for 50 HP ATS - 2 nos.
Electrical Panel with:
ACB 1250 A. - 2 nos.
Changeover Switch 1250 A - 1 No.
MCCB 630 A TP - 4 nos.
