Aluminum honeycomb plate's surface is aluminum alloy sheet treated by fluorocarbon roll-coating, and its middle is the aluminum honeycomb accordant with international aviation standard.
"Qin Feng" brand honeycomb panel specifications:
1.Thickness: 6mm-50mm
2.Al :0.5-2 .0 mm thick
3.Width: maximum width of 2150mm can be processed to
4.Length: any length
5.Color: see color card (available upon request to do a special color)
6.Core: aluminum honeycomb core a3003
7.Finish: fluorocarbon coating.
"Qin Feng" brand honeycomb panel application:
1.Buildings and building structure: the roof, facade and wall cladding, ceiling / partitions / doors, interior {walls, floors}
2.Elevator: bridge hand backplanes, siding, roof
3.Exhibitions: exhibition, display card production, store decoration
4.Transport industry: commercial vehicles [envelope, hand at the end], {bilge version ships, bulkheads}, rail, railway vehicles {backplanes, panel} public, special transport vehicles {container, volume, transportation tank}, aircraft industry
"qinfeng" aluminum honeycomb panel features:
1.Strength.
2.Stiffness.
3.Light weight.
4.Good surface flatness.
5.Fire performance: b-level and a2 level.
6.Noise effects: the amount of air noise 29db.
7.Good insulation: thermal conductivity 0.1613w / (m.K).
8.Surface paint by roller coating technology: use of ¡ý 70% of the fluorocarbon paint, weathering the wall, with a self-cleaning ability.
9."qin feng" brand aluminum honeycomb board has a good temperature resistance: depending on the location, uh environment to be used in -40 ¡æ +80 ¡æ, special requirements, can reach 180 ¡æ.
10."qin feng" brand aluminum honeycomb panels without separation or classification can be completely recycled.
structure, Winsom cassette honeycomb panel is made of aluminum outer & inner skins and expanded honeycomb core which are composited under high temperature high press. It features light weight, high strength, good rigidity, high corrosion resistance and stable performance. Since the air layer between outer and inner skins is divided into numerous closed holes by honeycomb, the transmission of heat and sound wave is greatly limited. Thus, compare with other wall cladding materials, aluminum honeycomb panel has better heat preservation and heat insulation performance. Due to the entire component is recycle, as the green environmental protection product, honeycomb panel is the direction of development of new building materials in the future.
The specification of the honeycomb core as follows : Aluminum foil model : 3003, 5052 Thickness of foil : 0.036-0.18 mm Cell size : 3-26 mm surfacr sheet 0.45-1.5mm PVDF and PE
Aluminum honeycomb panel manufacturers Face sheet: mill finished aluminum sheet/ Pvc filmed aluminum sheet/ Galvanized steel sheet/ Compact laminate sheet/ Stainless steel sheet Back sheet: mill finished aluminum sheet/ Pvc filmed aluminum sheet/ Galvanized steel sheet/ Compact laminate sheet/ Stainless steel sheet Core: Aluminum honeycomb core A3008 Size: < 1200mm Length: < 6000mm Thickness: as customized Package: plywood in crate
1) Light and straightness 2) Excellent rigidness 3) Excellent resistance to wind pressure 4) Fireproof 5) Easy to machine and model 6) Excellent weather resistance 7) High strength 8) Good sound and thermal insulation 9) Good shock absorption 10) Energy saving, heat reservation and environmental protection. In wooden cases.
Aluminum honeycomb panel Wooden packing
The aluminum honeycomb plate of qinfeng brand adopts ¦s Andwich structure. High quality and competitive price This product can have obvious advantages .It can be widely Used in the indoor and outdoor decoration of buildings , transport industry , elevator industry , tramway Traffic, etc.Moreover, with its complete production Workmanship , qinfeng company can adopt different composite workmanship according to actual situation to meet the requirements of different customers. Wooden case
Manufacturers to undertake customized public decoration waterproof aluminum honeycomb partition panel Product Feature and Application of the Aluminum Honeycomb Core Sandwich Panel Honeycomb structures are natural or man-made structures that have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. The geometry of honeycomb structures can vary widely but the common feature of all such structures is an array of hollow cells formed between thin vertical walls. The cells are often columnar andhexagonal in shape. A honeycomb shaped structure provides a material with minimal density and relative high out-of-plane compression properties and out-of-plane shear properties. Man-made honeycomb structural materials are commonly made by layering a honeycomb material between two thin layers that provide strength in tension. This forms a plate-like assembly. Honeycomb materials are widely used where flat or slightly curved surfaces are needed and their high Specific strength is valuable. They are widely used in the aerospace industry for this reason, and honeycomb materials in aluminum, fiberglass and advanced composite materials have been featured in aircraft and rockets since the 1950s. They can also be found in many other fields, from packaging materials in the form of paper-based honeycomb cardboard, to sporting goods like skis and snowboards. 1100 Aluminum Honeycomb Panel ITEM DETAILS Product Name Aluminum Honeycomb Panel Aluminum Alloy 1100,3003 Panel thickness 2.0~5mm or customized thickness Max size 2000*7000mm Surface treatment PVDF 2/3/4 Layer coating Powder coating Wood grain (wood grain paper /Therminal transfer printing / wood grain painting) Stone grain (stone grain painting / Therminal transfer) Color RAL color, Pantone color Shape Flat, cambered, double curved, triple curved, spherical, customized shaped. Warranty Max 25 years guarantee for ideal application evvironment Packaging Carton package Leadtime 15-20 days after receiving the deposit and confirm the details
Factory price granite marble building materials stone honeycomb panel Product Description Aluminum Honeycomb Panel Aluminum honeycomb panel are mainly used in outdoor wall decoration of the building, which adopt the high quality imported raw material with processing precise size. The surface using advanced pre-roll coating fluorocarbon technology can be kept three years without discoloration. The company used sub-component and two-component epoxy-modified epoxy film, fully enclosed dust-free operation by using automatic honeycomb composite panel production equipment high-temperature composite made by strengthening make more bonded aluminum honeycomb panels solid, more flexible bending, plate straighter, more reliable quality. According to architectural design requirements arc board, folding panels and trapezoidal shaped panels and other kinds of honeycomb panels, all arc-, L-, U- shaped non-planar disposable plates are shaped by the mold, the dame item only using the dame batch roller coating aluminum coil, no color phenomenon. Is a kind of high-quality, lightweight, high strength, appearance opulent green decorative material.We are professional granite marble building panel manufacturer.
Aluminum honeycomb panels are sandwich-structured composites with honeycomb cores. They are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low strength and stiffness for low load applications, to high strength and stiffness for high performance applications, from aluminum or fiber reinforced plastics. The strength of laminated or sandwich panels depends on the size of the panel, facing material used and the number or density of the honeycomb cells within it. Aluminum honeycomb panels are widely used in automotive and furniture to construction and logistics.
