Nuvent Aqua Acrylic premium Interior Emulsion paint gives lustrous, rich and vibrant finish. The paint is durable and is a good choice for people looking for glamorous designer interior look. Best results when applied with Aqua interior luxury primer. Coverage Area : 76 to 79 Sq.ft*/litre (2 Coats) Drying time : 30 min
Nuvent Red Oxide synthetic primer is formulated for preventing Rust. This primer is used primarily on ferrous metal either Interior/Exterior surfaces in mild corrosive environment. Coverage Area : 47 to 49 Sq.ft*/litre (2 coats) Drying time : 40 min (Recoat frequency : 2 hrs)
Budget Interior Primer is applied before paint application on interior walls. The primer helps to hide joints or seams on new dry wall. This primer is mainly recommended for new surfaces because it gives a consistent base and provides a neutral surface to ensure that paint colours show true. Coverage area : 52 to 54 Sq.ft*/litre (2 Coats) Drying time : 30 min (Recoat frequency : 1 hr) Colours : White/Neutral
Nuvent Super pro exterior emulsion offers excellent resistance to rough weather keeping the superior sheen finish. This Emulsion gives cleaner shades which last longer than any other paint. Nuvent Super pro exterior emulsion protects the wall from anti-algae, anti-fungal and prevents growing moss in heavy rain fall areas or in humid climate conditions. Best performance shown used with Super-Pro Primer. Coverage area : 68 to 70 Sq.ft*/litre (2 Coats) Drying time : 30 min (Recoat frequency : 1 hr) Colours : Standard/Customized
Automotive Coating Primer good filling ability 1k spot primer surfacer 2epoxy 2k primer 3polyester putty 4 etching primer for the raw metallic body surface primer
Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.
Is designed for interior works in dry locations, is highly economical and ecologically clean and highly wear-resistant. Solvent: water. Expenditure: 0,15 kg per 1m2. Drying time: 2 hours at 200C
Karvan-L company has developed new method and technology for production of semifinished pentaerythritol-modified phthalic and glyptic lacquer modified by petroleum acids and vegetable oils. Priming, varnishes, enamels and paints are manufactured on their basis. Materials were tested as per special assessment methodology of timber, metal coating protection ability, as well as coating systems for different aggressive environment. Lacquer materials are supplied with technical documentation, hygienic certificates confirming their designation and quality. We offer package delivery of semifinished varnishes and varnish based materials, consulting services, selection of schemes and their application with provision of all required features.
Is the solvent for lacquer materials as per GOST 3134-78. It is used for solution of oily paints, varnishes and enamels. It is clear unclouded liquid. Viscosity du is not more than 0,795 g/m. Boiling range: start of boiling not more than 1600C, end of boiling not more than 2050C. Closed flash point is not less than +330C. Aromatic hydrocarbon content not more than 16%. Sulphur content not more than 0,025%.
Water-dispersing acryl filler. It is used for elimination of surface defects and levelling for further painting. Filler is highly durable, dries fast, has no odour, soluble in water and good sanding properties. Expenditure: 0,5-1,0 kg per 1m2. Drying time: 4-8 hours at 200C.
Adhesive is prepared on the basis of acryl binder and forms durable adhesive coating. It is used in internal and external works of adhesion of ceramic tiles, gluing wood, cardboard, paper. This glue also is quite essential in housekeeping during small repair works. Drying time: 24 hours at 200C
High-quality gloss paint. It possesses excellent decorative and protective features. It is produced in different colours. Solvent: White s pirit. Expenditure: 130-150g per 1m. Drying time: 24 hours at 18-220C
Imber is the most widely used ecologically clean material. It is designed for decorative finish. Clear Varnish with preservative is used for pest control, protection from mould and atmospheric impacts. Varnish is used for painting of furniture, wooden items, improves their appearance, adds brightness, prolongs service life. Solvent: white-spirit. Expenditure: 100-150 g per m2. Drying time: 24 hours at 200C.
High quality alkyd based ready-to-use priming used for coating of surfaces with further enamelling. It is used to ensure firm and reliable connection of painted surface and lacquer materials. It is effective anticorrosion protection. It is produced in white, grey, red-brown colours. Solvent: Xylain. Expenditure: 100-150 per 1m2 in single layer. Drying time: 24 hours at 200C
Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent: Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C
"KARVAN-L" company is one of the first specialized entities manufacturing lacquer products in Azerbaijan. Work experience gained in construction market allows to manufacture lacquer materials both for large users and ad-hoc products adjusted to customer requirements. Highlyskilled specialists of central plant laboratory develop the material formula with special features: physical-mechanical parameters; viscosity, adjusted to customer requirements; different structure of painted surface; frost-resistance, enabling savings during transportation and storage; change in coating and whiteness; changes in elasticity and firmness of top film layer. Modern high-performance equipment, own scientific and research base allows the company constantly expand range of manufactured products and increases its quality. Our company produces more than 50 types of lacquer products: masonry paints, priming, filler, enamel; lacquer materials for metal and timber protection; construction glue and sealers; pentaerythritol-modified phthalic varnish and sunflower oil, coloured and clear varnish for parquet, furniture and other timber materials. “KARVAN-L” products are certified by Azerbaijan Republic State Standard and SanEpidemNadzor (center of sanitary supervision and disease control) authorities. Our company is a repeated winner of contests for supply of masonry paint, road striping coatings and other materials for Construction programs of Baku Government.
Is alkyd varnish based enamel and provides durable coating, possesses excellent features. It is used for internal and external application. It is prepared as gloss and matt enamels, and flooring enamel. Solvent: White spirit. Expenditure: 130-150g per 1m2. Drying time: 24 hours at 18-220C
Designed for protective and decorative finish of external faces of buildings and facilities with stone porous surface. Protect from contamination and preserve initial natural state of stones. It may require tinting with coloured pigment paste. Solvent: water. Expenditure: 1 kg per 6-8 m2. Drying time: hour at 200C.
Is used for colouring of organic diluted enamels and paints: pentaerythritol-modified phthalic , glyptal; Colours: red, black, blue, green, yellow.
For external and internal painting works. It is designed for painting of buildings and facilities and for interior painting, is weather-resistant, water-resistant, wear-proof and ecologically clean. White coloured, coloured into different shades as per client’s requirements. Solvent: water. Expenditure: 1kg per 2-3 m2.
