Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent:
Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C
Product description Type: Acrylic emulsion primer. Flugger Sealer is formulated with an acrylic micro-dispersed binder with unique penetration properties. Is alkaline resistant and provides an efficient sealing on slightly chalking and absorbent surface. Product application Suitable for interior priming of building materials, e.g. gypsum board, light concrete, limestone, brick, plaster, cement fibre plates, concrete as well as fillers. Technical data Density: 1,01 kg/litre Solids: Weight%: 14 Vol.%: 13 Spreading rate: 3-7 m2per litre depending on the substrate Application temp.: Min. working temperature during application and drying/curing: + 10¡æ Max atmospheric humidity 80 % RH Drying time at 20¡æ, 60% RH: Dry to touch: 1 h Recoat interval: 6 h Fully cured: Several days Dilution: Water Cleaning of tools etc.: Water Storage: Cool, frost-free and tightly closed. 10L.
CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars. FEATURES AND BENEFITS 100% solids epoxy Solvent free Low VOC High tensile and compressive strength Bonds to damp concrete High mechanical strength Excellent adhesion to most substrates Cures at temperature down to 5Ã??C High chemical resistance Unfilled system Allows for mortars and grouts to be mixed to any desirable consistency Typically 3-4 times stronger than typical concrete Complies with AS4020 potable water Australian Made Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).
SUMO ACRYLIC WALL PUTTY It is one of the best products of itâ??s kind available in the market, provides a very strong, durable foundation and brings out the best performance from the finish paints, both in looks and in durability. FEATURES :- SUMO Acrylic Wall Putty is a water based, ready-to-use putty meant for filling and smoothenening out cracks and dents on the plastered wall or similar interior surfaces. a) The putty has special acrylic binders that ensure that it retains a strong grip on the wall surface, thereby increasing the life of thw paint film. b) It is made using special equipment and technology that ensure smoothness and consistency c) On account of the puttyâ??s exceptional whiteness and smoothness, emulsions painted over the putty will tend to look richers d) It also enhances breathability and lesser porosity compared to conventional putty, thus improving paintperformance further e) It is quick drying, thus ensuring faster completion of jobs f) It has better alkali resistance, thus making it more suitable for new walls RECOMMENDED APPLICATION :- SUMO Acrylic Wall Putty Can be used for priming plastered walls, asbestos, brick work, concrete, etc PRODUCT TECHNICAL DATA :- COLOURS : White FINISH : Smooth and Matt COVERAGE : 1 coat: 38-40 sq.ft/KG 2 coats: 24-30 sq.ft/KG (It may vary from the quoted coverage to factor such as method and condition of application and surface roughness) DRYING TIME : Surface drying time â?? 20 minutes GLOSS LEVELS/SHEEN LEVELS : Silky smooth & Matt FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable SUITABILITY OF THINNER PAINT Use within 24 hrs. SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. Ensure drying time of 1 Week before cleaning.
