High quality alkyd based ready-to-use priming used for coating of surfaces with further enamelling. It is used to ensure firm and reliable connection of painted surface and lacquer materials. It is effective anticorrosion protection. It is produced in white, grey, red-brown colours.
Solvent: Xylain.
Expenditure: 100-150 per 1m2 in single layer.
Drying time: 24 hours at 200C
Supplier: Polytetrafluoroethylene (ptfe) anticorrosive pipes, pipe ware, universal ptfe machine sealing fittings and ptfe fittings of household appliances
Dura flex sf Features: good weatherability low odor environmentally safe seamless monolithic membrane completely waterproof highly abrasive resistant resistant to oils, solvents, caustics & acids. high solids high spread rate may be subjected to rain, snow, or extreme cold without affecting itµs curing will withstand extreme environments bonds to itself, new-to-old, with proper surface preparation or priming. Recommended uses: flooring parking structures concrete waterproofing animal pins applies directly to rusty metal metal roofs universal primer for hydrostatic pressure radon mitigation sea walls secondary containment marine tank coating & repair manhole and sewer linings Us - gallon Us - five Us - drum Tote Us - gallon Us - five Us - drum Tote
SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals. 2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation. 5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals. 6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.
Our bolted steel tanks are glass fused to steel tanks, which is mainly composed of steel sheet, special sealant, and the self-locking bolts. Glass-Fused-to-Steel technology is the premium coating technology in the storage tank market. The Glass-Fused-to-Steel technology adopts special steel for high strength enamel as the base material. By professional enameling technology, the high inert anticorrosive glaze layer is fused to the surface of the steel plate base material, and then the standardized enamel plate module is made. After the container is transported to the construction site, it is quickly installed with low consumption, and finally, the tank body is formed. Enamel assembly tank is an advanced tank production technology in the world, which has realized the breakthrough of materials, anti-corrosion technology, and installation mode compared with other materials (concrete tank and carbon steel welding tank). The bolted steel tank is not complex in structure and easy to ship to the construction site. The prime components of the kit are the glass-fused-to-steel panels, ready for bolting together, and complete with any special cut-outs for nozzles and/or manways or other appurtenances as required. The panels overlap and are bolted together and sealed with a high performance seal Our Glass Fused to Steel proprietary bolts are finless and are safe to use with glass fused to steel bolted tanks. All the bolt heads are plastic-capped to provide corrosion protection in the process environment. Mastic squeezes out between the panels and the bolt head seals the shank and protects it from contact with process fluids. Center Enamel is a well established, world-leading storage tanks manufacturer in China. Center Enamel provides the best storage tank solutions for storage tank projects for drinking water, Agricultural Water Tanks Dry Bulk Storage Tanks Potable Water Tanks Process Water Tanks wastewater, biogas storage, municipal sewage, firewater, grain storage, agricultural, oil, and other bulk liquids. Center Enamel has more than 30 years of industry experience and proud track record in the design and site erection of storage tanks and over the years has grown into a world-leading storage tanks manufacturer. Until 2018, Center Enamel storage tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
FUXI ® CHLOROSULFONATED POLYETHYLENE PAINT Chlorosulfonated polyethylene is prepared by chlorinating and sulfonating polyethylene from the mixed gas of chlorine and sulfur dioxide, which has ozone resistance, weather resistance and anti-aging properties. Excellent acid and alkali resistance, good mechanical properties, good water and oil resistance, cold resistance, humidity and heat resistance, and chemical resistance. Types of FUXI �® Chlorosulfonated Polyethylene Paint Chlorosulfonation Polyethylene Anticorrosive Finish Chlorosulfonation Polyethylene Anticorrosive Intermediate Paint Chlorosulfonation Polyethylene Anticorrosive Primer Acrylic Modified Vinyl Perchloride Anticorrosive Finish Vinyl Perchloride Primer Vinyl Perchloride Putty The Advantages of Chlorosulfonated Polyethylene Paint Good ozone resistance Good weather and aging resistance Excellent chemical resistance Good mechanical properties Good water and oil resistance Single component, easy to apply Technical Parameter of Chlorosulfonated Polyethylene Paint Primer Universal Technical Parameters Type: Solvent type Packs: Two packs Mixing Ratio: 10:1 Solid Content by weight: 40% Density: 1.15-1.3KG/L Touch Dry: 30mins Hard Dry: 5 hours Best used for area with requirement of chemical resistance, water resistance Now the price of polyethylene floor coating is reasonable, if you want to buy the best paint for polyethylene, please contact us. If you want to know more types of polyurethane based paint, please visit our website.
