Rust preventive dipping compound Complete and permanent solution for rust prevention. Also helps in preventing minor damages on the component due to its protective coating.
Resist-a-flame Water soluble, non-toxic spray-on, brush-on, roll-on fire coating for all substrates - inhibits flame spread and smoke development with an astm e19 & e84 a-rating. Lab tested to 1800+ degrees. 25 & 50 lb bags of granular material to be mixed with hot water @ 4.5 lbs per gallon
Indusrtial paints & primers
Water thinnable paint Used for automotive parts Application by dip and spary application Colour: In selected colours In 20 ltr drums
Anti corrosive paint Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates Colour: Selected colours Viscosity: 80 +/- 10 in ford cup b-4 Solids: 45 +/- 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Surface dry 4-6 hr. Hard dry: 32 -48 hr. Full curing in: 7-8 days Flash point : Above 30 c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/dip/ spray Thinner: P-71 Cross cut adhesion: Passes Bend test 1/2": Passes Resistance to salt spray test: Passes 150 hr. Test Surface preparation mild steel surface: Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results For marine application & chemical atmosphere Polycoat -rop 801 epoxy primer can be used. In 20 lts packing
Heat resiting paint Based on heat resistant silicone resin medium with aluminum pigment for protection of steel at high temperature up to 650°c Gives brilliant lustre with excellent weather resisting properties. Colour: Aluminum Solids: 48± 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Dust free in 4-5 hours recoat after 24 hours or heatinh at 225 for 1 hour. Flash point: Above 30° c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/spray Thinner P-73 Storage life: 6 month Surface preparation: Mild steel surface Requires wire brushing or acid pickling to get an absolutely clean metal surface free from rest. Precaution: Not to be used in areas of high acidity or alkalinity Does not cure and remains soft until temperature reaches 200°c At the time of application metal must be at room temperature Avoid applying thick coat since that may cause blistering. Uses: In industry for painting chimney stocks, exhaust sustems In 20 ltrs.
Copal varnish is made from wood rosin(biroza) & finds its application in industries like paint, polishes Basically used for giving a shining look on wood, glass, ceramic surfaces. Comes in pack of 20litres & 200 litres net drums
Navtex Exterior, durable, water based, environment friendly paint finishes
Shellac - Used for coating floors and also used in wood work
Paints, Plasters, Renders, Thermal Insulation, Primers..
Water Base Paints, Industrial Paints Like Epoxy Paint, Pu Paints, Primers etc.
Decorative paint and coating and paint related accessories.Manufacturer
Size 5 litres 10 litres 25 litres 200 litres Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline" Specially developed for modern powder coatings. Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures) The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc. Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu B Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80C, ideal for paint stripping systems. Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu A Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80�°C, ideal for paint stripping systems. Call us and we will be happy to advise you. Size 5L, 10L, 25L, 200L
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Size 750ml 5kg Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats. Size 5 litres 10 litres 25 litres Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified. Weight n/a Size 5L, 10L, 25L
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Colorless special adhesion promoter (primer) for almost all types of plastics. Transparent for subsequent painting. Sand plastics and prime once with primer spray. Size 400ml
