Silicon nitride (Si3N4), is an important structural ceramic material. It is a kind of superhard material, which has lubricity and wear resistance, and is atomic crystal; Oxidation resistance at high temperature. Moreover, it can resist cold and hot shock, and it will not break when heated to 1000 or more in the air, and then cooled and heated sharply. It is precisely because silicon nitride ceramics have such excellent characteristics that people often use it to manufacture mechanical components such as bearings, gas turbine blades, mechanical seal rings, permanent molds, pump bushings, etc.
Honeycomb ceramic heat storage body has many remarkable advantages, such as high temperature resistance, corrosion resistance, good thermal shock stability, high strength, large heat storage capacity, good thermal conductivity, etc., and its energy-saving effect and service life are greatly improved.
Regenerative high temperature air combustion is a new combustion technology with great energy saving and environmental protection effects. Honeycomb ceramic regenerator is the key component of regenerative burner, which is widely used in various furnaces, such as heating furnaces, hot blast furnaces, heat treatment furnaces, cracking furnaces, roasters, melting furnaces, soaking pits, oil and gas boilers, etc. in steel, machinery, building materials, chemistry, petrochemical, coating, non-ferrous metal smelting and other industries.
This technology makes the two regenerators alternately absorb heat and release heat through the reversing device to maximize the heat recovery of flue gas, and then heats the combustion air and gas in the furnace to more than 1000 Even the inferior fuel with low calorific value can achieve stable ignition and efficient combustion, which can save fuel up to 25% - 30%, increase the output by more than 15%, reduce the oxidation burning loss of steel billet by more than 40%, and reduce the flue gas temperature of NOx emission less than 100 ppm to less than 150 The greenhouse effect of the earth's atmosphere has been greatly reduced. If most industrial kilns in the country adopt HTAC technology, its economic and social benefits are immeasurable, which will greatly alleviate the situation of energy shortage and greatly improve the living environment of human beings.
Alumina ceramic is a ceramic material based on alumina (Al2O3), which is used for thick film integrated circuits. Alumina ceramics have good conductivity, mechanical strength and high temperature resistance.
It should be noted that ultrasonic wave should be used for washing. Alumina ceramic is a widely used ceramic.
Because of its superior performance, it has been more and more widely used in modern society, meeting the needs of daily use and special performance.
We are encompassed with ceramics and glass in our contemporary life. Ceramics is not only used in cookware but also in tiles roofs and bathrooms. kitchen crockery and pots are also made of ceramics. It is also used in many industrial applications to support manufacturing within sectors such as metallurgical, chemical me chanical and energy production. We are one of the largest and finest ceramics and natural stones exporters.our impeccable collection and aesthetic designs proves our proficiency. We have a significant presence throughout the country and are the driving force behind several well known projects which have been handled meticulously by our team of experts
Advantages:
1. Full ceramic structure with childproof mouthtip
2. 510 Thread FULL Ceramic Cartridge, no heavy metals issue
3. No thread design on top connection, saving machine/manual filling time
Specification:
We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products.
Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure.
Advantages:
1. Excellent insulation, security, long working life.
Ceramic liners have better performance than metal liners in wearproof, corrosion resistant and service life. The material of ceramic liner is the most advanced international increased flexible Zirconium. As per this materal, the tenacity breakpoint is K10--15MPa ( 10 times of the ordinary material), bending strength is �?600--800Mpa with Weber coefficient is m18 and modulus of elestity of E200Gpa. These new ceramic liners are made for superior performance under tough corrosive and abrasive conditions. The HRC is more than 60�°. Each liner is machined to close tolerances to assure ease of installation and long liner life.
LT240 Alumina oxide ceramic plate has a high thermal conductivity : 24w/m.k, it is of simple construction and small volume, but it can resist acid and alkali corrosion, work in high temperature and pressure and of stable performance for a long time.0.635mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm can be offered for TO-220, TO-247, TO-264, TO-3P sizes, customized size is available, ROHS is compliant.
Typical applications
IC, MOS, transistor, schottky, IGBT, high density switch power supply, HF communications equipment and brazing machine.
LT1800 Aluminum nitride conductive ceramic sheet has high thermal conductivity 180W/m-k,one of the highest thermal conductivity materials in metallic materials (7~10 times of alumina ceramic sheet). Excellent mechanical properties, good processing, high precision, smooth surface, no microcracks, bending, etc. Low dielectric constant and dielectric loss, reliable electrical insulation performance. Non-toxic, high temperature of 1800 degrees, oil resistant, chemical resistant, and similar to the thermal expansion coefficient of silicon, without hygroscopic property, stable performance and high reliability in high temperature and high humidity. Along with the microelectronic devices,
Features & Benefits:
Extremely high thermal conductivity
High temperature and high humidity
Good insulation Good chemical stability
Typical Applications:
Application of optical communication devices
High frequency microwave application
Power electronic components
LED industry Car electronic module
The thermal module substrate
LP900 is a silicon carbide ceramic heat sink and it belongs to the micro-hole structure. Under the same unit area,it can be more than 30% porosity, greatly increasing the heat transfer area with air to enhance its cooling effect. At the same time its heat capacity is small, its heat storage is small and the heat can be more quickly to the outside world. Ceramic heat sink main features: environmental protection, insulation resistance to high pressure, efficient heat, to avoid brewing EMI problems. So it can effectively solve the electronic and home appliance industry thermal and cooling problems, while it is specially for small and medium wattage power consumption, design space pay attention to light, thin, short, small products. Whats more, it can provide technical support and application for electronic products innovative and development.
LT240 Alumina oxide ceramic plate has a high thermal conductivity : 24w/m.k, it is of simple construction and small volume, but it can resist acid and alkali corrosion, work in high temperature and pressure and of stable performance for a long time.0.635mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm can be offered for TO-220, TO-247, TO-264, TO-3P sizes, customized size is available, ROHS is compliant.
Typical applications
IC, MOS, transistor, schottky, IGBT, high density switch power supply, HF communications equipment and brazing machine.
Weldable alumina ceramic tiles for coal and other material handling and processing industries. Ceramic linings provide long-lasting solutions to the problems caused by abrasive wear and corrosion in a variety of hostile environments. Alumina ceramic linings will outlast lower grade materials commonly used to line or protect processing and material handling equipment, including Basalt, stainless steel, carbon steel and wear resistant plates, by factors of 3 to 15 times.
QMX's wear resistant ceramic tiles can be cut into any shape and are easy to install and maintain. They are suitable for both wet and dry processing applications. Advanced ceramics combine high strength and toughness with extreme hardness to deliver exceptional wear resistance.
The ceramic pipe tiles,also cale taper tile or Trapezoidal tile, are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
QMX's wear resistant ceramic tiles can be cut into any shape and are easy to install and maintain. They are suitable for both wet and dry processing applications. Advanced ceramics combine high strength and toughness with extreme hardness to deliver exceptional wear resistance.
Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximised to minimise down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
Packaging & Delivery:
(1) 25kgs per plastic drum, wooden pallet
(2)Inner boxes with filler .
(3)Outpackage is high quality cartons .
(4)Custom package
Our products are also exported to many courtries and build long-term business relationship with customers.
Every year we also go to many exhibitions all over the world.
What can we do for you?
1. Sample is available.
2. Independent R&D, ISO manufacture, precise quality standards, modern logistics management, and sound marketing strategy.
3. Inquiry replied within 24 hours.
4. Patented products.
5. Some extra accessories can be supplied.
6.The larger quantity you order,the more competitive prices you'll get.
7. Necessary Certificates can be supplied.
BeO ceramic materials. BeO has high thermal conductivity, high melting point (2530 ± 10°C), high strength, high insulation, high chemical and thermal stability, low dielectric constant, low dielectric loss and good adaptability properties,etc.Widely used in special metallurgy,vacuum electronics,nuclear technology,microelectronics and optoelectronics. Especially in high-power semiconductor devices,integrated circuits, package microwave vacuum devices and nuclear reactors,
Beryllium Oxide ceramic material specification and properties
Beryllium oxide property
Melting point 2575°C
Boiling point 4300 ° C
Density 3.01 g/mL at 25 °C (lit.)
Refractive index 1.733
Flash point :4300 ° C
Form: Powder
Specific gravity: 3.01
Color :white
Insoluble in water: Slowly soluble in concentrated acids, alkali hydroxides
Merck 14,1172
Stability: Stable.
Get the following benefits from Coraynic beryllium in your application or design:
Lighter weight and higher thermal conductivity than aluminum
Stronger than steel
Performs reliably in cryogenic environments
High heat tolerance
Non-magnetic
High neutron reflectivity & low neutron absorption
Beryllium brings unrivaled advantages to its end-use applications, including:
Thermal conductivity that is better than aluminum
Moderate CTE & good natural damping - reducing jitter and vibrations
Low neutron absorption & high reflectivity
High specific heat & high thermal conductivity
Higher Modulus as the temperature decreases
High infrared reflectance
Low density
LT1800 Aluminum nitride conductive ceramic sheet has high thermal conductivity 180W/m-k,one of the highest thermal conductivity materials in metallic materials (7~10 times of alumina ceramic sheet). Excellent mechanical properties, good processing, high precision, smooth surface, no microcracks, bending, etc. Low dielectric constant and dielectric loss, reliable electrical insulation performance. Non-toxic, high temperature of 1800 degrees, oil resistant, chemical resistant, and similar to the thermal expansion coefficient of silicon, without hygroscopic property, stable performance and high reliability in high temperature and high humidity. Along with the microelectronic devices,
Features & Benefits:
Extremely high thermal conductivity
High temperature and high humidity
Good insulation Good chemical stability
Typical Applications:
Application of optical communication devices
High frequency microwave application
Power electronic components
LED industry Car electronic module
The thermal module substrate
Maifan stone ceramic ball has the character such as purifying water quality, increase the biological activity of water, improve the body's physiological function and adjust the pH value by two-way regulating.
If drinking the water that treating by maifan stone ball for a long time, that can protect liver, invigorating stomach, diuresis, stable and healthy blook pressure, improve blood circulation, preventing sickness, anti-cancer, prolong life, protect skin and beaty face, strong bones, develop brains, promoting growth, stop bleeding and detumescence. It widely used in medical, food and health, environment protection, water quality improvement, beverages, wine, medicine, deodorant, crops, flower cultivation, poultry, aquaculture etc. industries.
Maifan stone is produced from porphyritic pea gravel in the valley , named maifan stone because of its appearance is similar to rice. It is a kind of mineral health healing stone with biological activity. It can dissolve out 42 kinds of elements including 14 kinds trace elements which human body need and 15 kinds rare earth elements.
The water treated by maifan stone can increase the minerals in the water to active the Ion of water, it also can absorb the toxic substances because of pollution. and change the water into the clean active mineral water. Just because of these character of maifan stone, our maifan stone ceramic ball can dissolve out Zinc and Metasilicic acid. their contents can up to the National Standard for drinking water. After the testing of toxicology experiment and radioactive by National Health Department and prove that the Maifan stone ball is poisonless and harmless to human body.
3085 Other Ceramic Products Suppliers
Short on time? Let Other Ceramic Products sellers contact you.
