Features: 1. PVC fence boom is a kind of light weight permanent containment boom, made of high strength orange PVC fabric with closed cell polyethylene foam to control oil spill in calm water area. 2. There is a top steel cable and bottom ballast chain to keep the strength of the fence boom. There are elastic stiffeners between solid floats to keep the oil fence straight and stiff and ensure an effective draft. 3. It is equipped with ASTM Z quick connector and easy to handle, store and deploy from handle bag, reel or rack because its light weight, compact volume. Model/ParameterSWL450SWL750SWL900SWL1100 Overall height(mm)4507509001100 Freeboard(mm)150250300400 Draft(mm)300500600700 Standard length per section(m)10,20 Tensile StrengthKN20304045 BallastBlock or chain WeightKG/m3.14.25.25.8 Standard connectorASTM Z quick connector PackingHangle bag, reel or rack
Features: 1. Disc/brush oil recovery skimmer is a floating oil skimmer with rotating disc or brush to recovery the oil spills in water. 2. The disc and brush could be exchangable according to customers requirement. It consists of a power pack, a floatable head and linking hoses between the head and power pack. 3. There are many models to suit oil viscosity and recovery conditions. These devices have been widely used on open seas, rivers, harbors, lakes and ponds. Technical Data: Model/Parameter ZSJ5 ZSJ10 ZSJ20 ZSJ30 ZSJ60 rotate speed (R/M) 40-100 40-100 40-200 40-300 40-600 Working pressure(Mpa) 3~6 3~6 3~6 3~6 5~8 Flow rate of oil pump(m/h) 5 10 20 30 60 recovery capability(m/h) 5 10 20 30 60 drive power(diesel engine or explosion-proof motor)KW 4.0/3 6.3/4 4.0+6.3/7.5 14.5/11 21/15 main unit weight (Kg) 55 70 120 160 200 weight of power station (KG) 100 115 255 500 550 diameter of oil discharge hose 2 2 2.5 3 4
Crude oil saltwater separators filtration systems capable of oil clarification as well as inline dosing and biocide reduction
Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. Item Dimension Pack(Bag or Carton) Absorb Capability Weight XTL127-1 Marine Oil absorbent Booms 12.7cm*3M 4pcs/ B 96 L/ B 8 kg/ B XTL127-2 Marine Oil absorbent Booms 12.7cm*6M 2pcs/ B 96 L/ B 8 kg/ B XTL220-1 Marine Oil absorbent Booms 20cm*3M 4pcs/ B 192 L/ B 16 kg/ B XTL220-2 Marine Oil absorbent Booms 20cm*6M 2pcs/ B 192 L/ B 16 kg/ B
Features: 1. It is an kind of heavy duty oil containment boom with inflatable air chamber to use in nearshore, harbors, open waters and offshore. 2. It is made of neoprene rubber reinforced by two layers of high strength fabric. The neoprene rubber has good property of oil resistance, chemical resistance and UV reristance. So the inflatable neoprene oil boom has longer service life with a minimum maintenance. 3. There are elastic stiffen rods between air chambers to make the boom stiff to prevent the waves from overtopping. Each individual air chamber is isolated and will not be affected by other adjacent damaged air chambers. 4. The inflatable rubber boom works under the hydraulic power pack and air blowers. It can be packed in reel machine to store in special designed container or covered by tarpaulin. Simple Sketch: Technical Data: Model /Parameter WQJ800 WQJ1000 WQJ1200 WQJ1500 WQJ1800 WQJ2000 WQJ2600 Overall height(mm) 800 1000 1200 1500 1800 2000 2600 Freeboard(mm) 280 360 400 500 560 600 810 Draft(mm) 370 430 590 780 950 1100 1400 Max, working tensile strength(KN) 110 140 170 190 230 260 280 Standard length per section(m) 100/200 or as customers requirement Max, wave height to withstand(m) 2 2 2.5 3 3 4 4 Max, wind speed to withstand(m/s) 15 15 20 20 20 25 25 Max, current speed to with stand(KN) 2-3 3 3-4 3-4 3-4 3-4 3-4 Standard connector ASTM or Stainless steel hinge pin connector Drive power of power pack(KW) 14.5kw 14.5kw 14.5kw 21kw 21kw 21kw 21kw
Features: 1. Permanent Oil boom is special designed for permanent deployment to contain oil spills or debris in harbors, tidal inlets and other oil facilities. 2. It is constructed with semi-rigid PU fabric or neoprene rubber belt and high density polyethylene (HDPE) float shells filled with Polyurethane (PU) foam. 3. The Permanent oil containment boom is fixed ASTM universal or quick connector for easy deployment. Technical data: Model POB450 POB600 POB750 POB900 Overall height 450mm 600mm 750mm 900mm Fabric material PVC or neoprene belt Float HDPE or per customers requirement Section Length 20m or 25m or per customers requirement Max working tensile strength(Kn) 40 50 70 80
Features: 1. Oil absorbent boom is made of super absorbent polypropylene with strong outer mesh There is a nylon cable running through each boom which can be connected each other by a special steel connector. 2. There are a full range of oil absorbent material similar to oil absorbent boom like oil absorbent pillow, oil absorbent sweep and ect. 3. The oil sorbent boom can be used to control oil spills such as fuel oil, hydraulic oil, gasoline, diesel and ect. ItemDimensionPack(Bag or Carton)Absorb CapabilityWeight XTL127-1 Marine Oil absorbent Booms12.7cm*3M 4pcs/ B96 L/ B8 kg/ B XTL127-2 Marine Oil absorbent Booms12.7cm*6M2pcs/ B96 L/ B8 kg/ B XTL220-1 Marine Oil absorbent Booms20cm*3M4pcs/ B192 L/ B16 kg/ B XTL220-2 Marine Oil absorbent Booms20cm*6M2pcs/ B192 L/ B16 kg/ B
Features: 1. The weir oil recovery skimmer consists of floating head, power pack and oil hoses between the skimmer head and the power pack. 2. It recovers spilled oil via self-adjusting weir and suction oil pump. 3. The weir skimmer is suitable for recovery of oil spills with low and medium viscosity and can be widely used on harbors, oil ports, wharfs, rivers, lakes, shipyards, ship-breaking yards, petroleum and chemical industries, power plants, wastewater treatment plants and other site where are oil spills to be recovered. Technical data: ItemYSJ-30YSJ-50YSJ-100 Max. skimming rate(m/h)3050100 underwater depth of overflow weir(mm)35-9050-12080-150 drive power(diesel engine or explosion-proof motor)(KW)14.5/7.514.5/1121/15 suction head of oil recovery pump(m)888 operating pressure of hydraulic cylinder(mpa)555
Features: 1. Oil absorbent pad or mat is one of the important materials for treading oil spill on water. It is made of 100% polypropylene with high oleophilic property. 2. It is not only used for absorbing oil inside absorbent booms but also for absorbing oil spills in water where mechanical recovery devices cannot recovery oil spills or the oil dispersant can be not used. Item Technical data Color White/grey/green or as customers requirement Absorbent capability 15-20times of self weight Material 100% polypropylene Size as customersrequirement Storage life 3 years
Features: 1. Disc/brush oil recovery skimmer is a floating oil skimmer with rotating disc or brush to recovery the oil spills in water. 2. The disc and brush could be exchangable according to customers requirement. It consists of a power pack, a floatable head and linking hoses between the head and power pack. 3. There are many models to suit oil viscosity and recovery conditions. These devices have been widely used on open seas, rivers, harbors, lakes and ponds. Technical Data: Model/ParameterZSJ5ZSJ10ZSJ20ZSJ30ZSJ60 rotate speed (R/M)40-10040-10040-20040-30040-600 Working pressure(Mpa)3~63~63~63~65~8 Flow rate of oil pump(m/h)510203060 recovery capability(m/h)510203060 drive power(diesel engine or explosion-proof motor)KW4.0/36.3/44.0+6.3/7.514.5/1121/15 main unit weight (Kg)5570120160200 weight of power station (KG)100115255500550 diameter of oil discharge hose222.534
Features: 1. The weir oil recovery skimmer consists of floating head, power pack and oil hoses between the skimmer head and the power pack. 2. It recovers spilled oil via self-adjusting weir and suction oil pump. 3. The weir skimmer is suitable for recovery of oil spills with low and medium viscosity and can be widely used on harbors, oil ports, wharfs, rivers, lakes, shipyards, ship-breaking yards, petroleum and chemical industries, power plants, wastewater treatment plants and other site where are oil spills to be recovered. Technical data: Item YSJ-30 YSJ-50 YSJ-100 Max. skimming rate(m/h) 30 50 100 underwater depth of overflow weir(mm) 35-90 50-120 80-150 drive power(diesel engine or explosion-proof motor)(KW) 14.5/7.5 14.5/11 21/15 suction head of oil recovery pump(m) 8 8 8 operating pressure of hydraulic cylinder(mpa) 5 5 5
We are a manufacturer and of cementing tools since 1997, and now we have almost 400 workers, the products cover cable protector, thread protector, cementing head/plug, stage collar, float equipment, liner hanger, centralizer, stop collar and so on.
sucker rod, coupling
As a manufacturer and a supplier we produce cementing tools since 1997, and now we have almost 400 workers, the products cover cementing head/plug, stage collar, float equipment, centralizer and so on. Please contact me if you have need,
FLYC Series mobile filtration system is the ideal way to prefilter and transfer fluids into reservoirs or to clean up existing system.It is a self-contained filtration system equipped with high efficiency, high capacity elements capable of removing particulate contamination quickly, conveniently and economically. Operating pressure: Max. 1.0 MPa (10bar) Operating temperature of 451 Kinematic viscosity: 5~80mm/s Protection class: IP55
Please contact us for more informations
The Oil Filtration Plant shall be designed for high vacuum and low temperature of oil for achieving required results. The Oil Filtration Plant shall be Mobile, mounted on an under carriage with Four Pneumatic wheels. Automatic brakes and towing arrangement shall be provided. The Plant shall be weather proofed and shall be suitable for outdoor use. The casing shall be provided with doors of SS 304 Sheets, hinged on fabricated Framework, Angles and Channels to have access to the operational controls and inspection windows etc. The equipment shall be enclosed and protected against climatic conditions. The Screw Jacks for relieving pressure on wheels at stationary conditions shall be provided. All components shall have adequate strength and rigidity to withstand normal conditions of handling transport and usage and shall be free from edges or corners to avoid injury to Operating Personnel in normal conditions of use. The design of the Plant shall be such that if required the part/s can easily be replaced.
NSH GED Vacuum Distillation System is able to regenerate a variety of waste oil: engine oil, transformer oil,motor oil, car oil, lubrication oil, gear oil, hydraulic oil, washing oil, Ship marine oil, etc. Specialized not only one single type of oil, but also mixed waste/used black dirty oil. After the distillation treatment, vacuum treatment and regeneration treatment through GED system, you can get high quality diesel, and a small amount of gasoline
NSH Vacuum Insulating Oil Purifier, use for purification and treatment of insulating oils, oil filling and drying of electrical equipment, such as transformers. This series is able to purify trace water, gas and particulate matters effectively. It is divided into three models for different practical usage: â?¢VF: Single-stage Vacuum Transformer Oil Purifier â?¢VFD: Double-stage Vacuum Transformer Oil Purifier â?¢VFD-R: Double-stage Vacuum oil Purification and Regeneration Plant VFD-A: Advanced Full-automatic Vacuum Insulation Oil Purifier Tailored: Tailored Vacuum Oil Solutions
This equipment is a multi-source high-vacuum evaporation coating instrument. The equipment adopts a front-opening vacuum chamber design. The chamber has a large space and strong expandability, which can meet the evaporation coating of multiple types of large-size samples. The chamber has an upper sample stage inside, and the clamping or clamping type sample mounting parts can be selected according to the user's sample style. The sample table can be rotated, heated and raised and lowered, and all operations are integrated and controlled through the touch screen. The vacuum pump set of the equipment is a two-stage vacuum system, which is composed of a dual stage rotary vane vacuum pump and a turbo molecular pump. It can provide a clean and oil-free high vacuum environment for the vacuum coating test; the vacuum system contains a complete pneumatic valve system, and the user can One-touch operation through the touch screen realizes vacuuming, non-stop load and unload sample, complete shutdown and other operations. The equipment has two sets of evaporation sources. It adopts a tungsten boat evaporation source and water-cooled copper electrodes. It can support a maximum current of 300A and a heating temperature of up to 3000â??. It can realize the evaporation of various refractory metals. This equipment adopts an integrated design, and the chamber and the electric control part are separated left and right, which realizes the separation of water and electricity, and effectively guarantees the safety of users. The electric control part adopts the design of the combination of touch screen and button panel. The vacuum system, sample table and other auxiliary functions are operated by the touch screen with one button. The evaporation and the film thickness control are operated independently by the panel, which is as convenient for users as possible while avoiding the possibility of wrong operation. The equipment is well-designed and has excellent performance, and it is an indispensable choice for laboratory high-precision evaporation coating test.
