Scope Petroleum products copper corrosion tester for gb / t5096, iso2160, astm d130, ip154 "petroleum products copper corrosion test method" determination of aviation gasoline, jet fuel, motor gasoline or has reye's vapor pressure of not more than 124kpa (900mmhg) other hydrocarbons, solvent oil, diesel oil, distillate fuel oil, lubricants and other petroleum extent of corrosion products on the copper. Features 1, with integrated design, easy operation and maintenance 2, the use of pid temperature control temperature control system, temperature control and high precision, stable 3, using a water bath or oil bath heating, heating speed, good stability 4, with a standard swatch us imported to meet the test requirements than 5, imported omron temperature control system, temperature of the system with expert school policies 6, using the experimental oxygen bomb storage box for easy storage and management of oxygen bomb Technical parameters 1, power supply voltage: 220v ± 10%, 50hz; 2, temperature range: room temperature ~ 100 ? arbitrarily set; temperature accuracy: ± 0.2 ?; 3. Temperature control mode: import omron smart thermostat system; 4. Timing: automatic chronograph, 1 minute to 24 hours in any setting; 5, the detection unit: 6; 6, oxygen bomb storage: configure a dedicated oxygen bomb storage warehouse, and instrument host integration design; 7, ambient temperature: room temperature ~ 35 ?; 8, relative humidity: =85%; 9. Total power consumption: less than 1800w
Features: The optimum pad contact with borehole, maintained by an advanced hydraulic actuating device, makes it possible to acquire high quality image data in rough borehole conditions. henew button and connector structure, the advanced sealing technique and up-to-the date electronics ensure the high reliability of the tool. he complete calibration facilities and systematic calibration procedures ensure the data precision and consistency. The mature data acquisition and field processing software satisfy the clients with quick and flexible image presentation. The tool can work in fast scanning mode, slow scanning mode or dipmeter mode. Specification : Temperature: 350¨H(175) Pressure : 20,000 Psi (140 MPa) / 15,000 Psi (100 MPa) Telemetry : 430 Kbps/100 Kbps Inclination : measurement range Inclination: 0 Azimuth:02 (when inclination>1 ) Resistivity measuring range:0. ,000 .m Vertical resolution :0.2 in. (5 mm) Caliper measuring range:5 in. (127 mm) ~ 20.8 in. (530 mm) Logging speed :1,476 ft/h (450 m/h), in Fast mode 740 ft/h (225 m/h), in Slow mode Applications: This tool is used to acquire and present variety of 2D or 3D borehole resistivity images, which are widely used in geological analysis, petrophysical analysis and borehole property analysis. The image data processing technique, image data base and intelligent image correlation technique greatly widen the application scope of MCI imaging logging data. The logging data are mainly used for: Sedimentary feature and rock texture recognition Lithology identification, profile correlation and electro-facies analysis Fracture, vug and fault identification Dip analysis and structural feature analysis in the vicinity of the borehole Borehole geometry and in-situ earth stress analysis Formation evaluation in carbonate reservoir and some igneous rock reservoir
Features: The latest Complex Programmable Logic Devices and Digital Signal Processing are used to ensure the fastest amd most reliable operation. The system design optimies the human / machine interface for simplicity of operation and ease of use. Applications: Logging control Power supply for logging sondes Data processing Data recording Plotting Tool calibration Data acquisition Display Data playback and editing Measuring Range : Operating Temperature:0 Centigrade to 50 Centigrade (32 Fahrenheit to 122 Fahrenheit) Storage temperature: -20 Centigrade to 75 Centigrade(0 Fahrenheit to 167 Fahrenheit) Relative humidity:
Features: Multi-array induction tool coil system adopts asymmetry structure with one transmitter coil and eight receiver coils. It works at three frequencies. Multi-dsp and array coil system are adopted in the tool. The multi-channel, multi-frequency weak signal pick-up in the tool is achieved by real-time calibration, digital filtering and digital phase-sensitive detection technology. A lot of mechanical and electronic measures have been taken for reaching the desirerable tool stability and high reliability. Due to the excellent performance, high reliability and high accuracy of multi-array induction tool, many oil companies decide to adopt multi-array induction tool as one important part of their logging program. Specification : Temperature:311 ¨h(155 ) Pressure :14503.8 psi (100 mpa) Data transmission:430 kbps/100 kbps Accuracy: Vertical resolution : 0.75 ms/m or < 2% 1.81 in., 23.62 in., 47.24 in. (30cm, 60cm, 120cm) Investigation depth:9.84 in., 19.69 in., 29.53 in., 59.05 in. 88.58in. (25cm50cm75cm150cm225cm) Applications: Accurate formation resistivity measurement with three vertical resolutions and five investigation depths Accurate oil/water saturation evaluation (both oil saturation and residual oil saturation) Thin layer analyses in laminated reservoirs Oil/water zone identification by resistivity profile images in many difficult cases, like deeply-invaded formations etc. Resistivity measurement in oil-based mud or air-filled boreholes.
KOSUN uses best materials and latest technics in the manufacture of SC-3 linear shale shaker. It is endowed with high efficiency, convenient & simple operation & maintenance, function modularization, all of which makes the allocation more flexible. Screens can be changed on any side of shaker by one worker within one minute. The space between two shale shakers can be reduced to the maximum, which save the operation space on tank body. It employs the super strong vibration force produced by imported vibrating motor and we also apply KOSUN screen and blockage, which strengthens the screen capacity dramatically and improves the degree of dryness of drilling solids. It decreases the number of equipment involved and drilling fluids cost together with discharging fees of drilling solids. Model Length (mm) Width (mm) Height (mm) Weight (KG) SC-3 3008 1654 1768 1613. As required by customers.
Fuel dispenser Single gun, 1 oil product, stainless steel lcd display, 1 pump, 1 flow meter, range of flow:(5-50)l/min, (1.6*0.86*0.48m)
Supplier: Rice , coffee , agricultural products, seafood, spices, sugar, cooking oil, herbs essence oils , food, medical equipment, cosmetics, minerals, petroleum, fertilizer, animal feed, production equipment, extraction, packaging...
Buyer: Household electrical appliances , gemstone, cars
Xj250 workover rig is one of light-duty self-propelled rig, and mainly used for shallow well workover , oil testing, fishing and pump check operations. It is equipped with a lifting system, single drum drawworks, hydraulically raised double or single mast and famous engine and allison hydromechanical transmission. It is easy for transportation and convenient for installation, operation and maintenance. 68.90 ft ( 21m ) double section mastor 59.06 ft ( 18m ) single section mast. 6íß6 full drive chassis, fast movement, good cross-country capability. Double drum drawworks, band brake, without auxiliary brake. Mast base and simple operation platform are hanged on the rear. Rotary driving system can be equipped. Main parameters Model: Xj250 Service depth (2-7/8" ue tubing) ft(m): 10500(3200) Workover depth (2-7/8"dp) ft(m): 8530(2600) Nominal hook load lb(kn): 89920(400) Max hook load lb(kn): 151740(675) Wireline dia/effective line quantity in.(mm): ª)0.87/6(ª)22/6) Max lifting speed of hook ft/s(m/s) 4.6(1.4) Overall dimensions in traveling condition ft(m) 45.01íß8.86íß13.71(13.72íß2.7íß4.18) Weight lb(kg) 61729(29000)
Pumping unit