Served Customers in Many industries Around the World. High Tensile Performance, Suitable for River/harbour/lake/ocean/offshore. Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant.
With 10 + Years of Experience in The Production of Safety Protection Products. High Tensile Performance, Suitable for River/harbour/lake/ocean/offshore. Suitable for Controlling the Diffusion and Transfer of Oil Spill in Ocean or Other Waters.
The standard dust removal components are configured as: mechanical equalizing net, 201 stainless steel electrostatic module, high voltage generator, oil leakage hole
Electrical components: Schneider;
Working voltage: 220VAC 50/60HZ
Use temperature: 50
Maintenance space: 1000mm
Capacity : 1.5 ton/hr
Grades of Products : All fine and coarse grades of expanded perlite can be produced up to 8mm.
Fuel Type : Natural Gas, LNG or Diesel
Turn Key : Yes
1803 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
Tire regenerate of the RShTN type received by a thermomechanical method from automobile tires. Regenerate is available in rolls used for the production of rubber products for various purposes (in the tire industry, production of RTG ). The tire regenerate meets the requirements of TU U 6-25521987.009-2000 "Thermomechanical tire regenerate".
Vacuum Degasser are used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclones and centrifuges follow in the arrangement.
Operational Theory:
Vacuum degasser utilize negative pressure by vacuum pump to withdraw entrained gases from the mud. In order for this to work, mud is pumped through a venturi, which develops a negative pressure in the vessel by vacuum pump, thus sucking mud into the unit. The choice between horizontally- or vertically-mounted units is typically based on the footprint requirements of the specific rig.
Features and Advantages:
1.Scientific reasonable design for structure,it can get effective gas fluids separation,filter out impurities to guarantee vent pipe always clear.
2.Adopt belt drive,avoid the complication of the reducing gear,ensure the long working time without trouble.
3.Water circle type of vacuum pump is always at a constant temperature,apply to pump the flammable and explosive.
4.High degassing efficiency,up to 95%.
5.There is gas-water separator in vacuum degasser,which can avoid the gas and fluids are all removed together,and also can supply water for vacuum pump,saving water and environment-friendly
Vacuum Degasser are used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclones and centrifuges follow in the arrangement.
Operational Theory:
Vacuum degasser utilize negative pressure by vacuum pump to withdraw entrained gases from the mud. In order for this to work, mud is pumped through a venturi, which develops a negative pressure in the vessel by vacuum pump, thus sucking mud into the unit. The choice between horizontally- or vertically-mounted units is typically based on the footprint requirements of the specific rig.
Features and Advantages:
1.Scientific reasonable design for structure,it can get effective gas fluids separation,filter out impurities to guarantee vent pipe always clear.
2.Adopt belt drive,avoid the complication of the reducing gear,ensure the long working time without trouble.
3.Water circle type of vacuum pump is always at a constant temperature,apply to pump the flammable and explosive.
4.High degassing efficiency,up to 95%.
5.There is gas-water separator in vacuum degasser,which can avoid the gas and fluids are all removed together,and also can supply water for vacuum pump,saving water and environment-friendly
The Lake Fishing Magnet is a junk retrieval tool designed to effectively remove metal particles, shavings, and debris from the bottom of the well bore.
The process of retrieving small, oddly shaped objects is one of the most frequent and most difficult fishing jobs.
Typically, these objects are the result of bit failures that leave cones and cutters in the hole, or are an accumulation of mill cuttings, or are simply accidental droppings of unmillable objects into the hole.
In these cases, the fish is nearly always an odd-shaped object that cannot be engaged in the normal manner.
Fishing magnets successfully remove these small objects from the hole bottom. The tool's design incorporates generous circulation holes that wash away the cuttings and other debris that other wise would prevent contact with the magnet.
Fishing magnets can be run on either wire line or pipe.
Annular Blowout Preventer(Annular BOP) is important equipment for drilling well. It widly used in onshore and offshore drilling, Geothemal driling. We supply three type of annular BOP: Bloted-cover, Wedged-Cover and Latched-cover. All type of annular BOP are strictly manucatured as per API spec 16A, have same reliable quality as other US products.
There type are Camaron, shaffer and Hydril in the the word.
API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Working Pressure: 35Mpa---105MPa
API Standerard
Product Name: API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Origin Place:Dongying City,China
Assembly: X-Mass Tree Assembly , Valves and other small connections
Material:AA, BB, CC, DD, EE, FF and the other
Brand:RT
Exported to Canada,America,Saudi Arabia,Kuwait,Iraq,UAE,Oman,Pakistan
Packing:Pallet or according to your requirement
Our service:Technical support of assembly the well head products and we have some other oilfield chemicals such as high temperature foaming agent
API cementing collar double stage collar with premium thread
1. Structure:
1) All inner parts are made of easily drillable aluminum alloy
2) The device can be connected directly to same type casing
3) Reliable back-pressure leak proof structure, enable grout or slurry flow with less resistance
4) Valve seat and valve disk can effectively prevent grout from flowing back
5) Hardness of base material is equivalent to API Spec N-80
6) API spec.Q1 and ISO9000 certification
2. Purpose:
It be designed according to the standard of SY/T5476-92, could reduce the mixed slurry, calculate correctly, save the cement and increase cementing quality.
Description
Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work.
It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations.
Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel.
We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc.
All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU.
Gate valves(ball screw operation)
The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations.
The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism
Size:3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:10, 000psi, 15, 000psi
Temperature:l u, pu
Mat's:aa-ff psl:1-4 pr:1-2
Honorary certificate
Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
The Roller Reamer is designed for various reaming operation but particularly for various reaming operation but particularly for stabilization purpose when drilling in very abrasive formations. It will fit hole sizes ranging from ?6 to 28?. In addition, each body by simple adjustment of blocks and proper selection of cutters, will suit a wide range of hole sizes.
Three different types(T, F, and B) of cutters are offered:
Type T: Milled, machined with hardfaced sharp teeth for soft formations.
Type F: Milled, machined with hardfaced flat teeth, for medium hard formations.
Type B: Equipped with pressed-in tungsten carbide buttons, for hard formations.
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2?LP
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2? tool joint box
AQF02-140
2? safety valve
140MPa
2?FIG2002 tool joint pin X 2? tool joint box
Product design and scope
Design standard:API 6D
Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements.
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25/ ASME B31.8
Wall thickness:ASME B16.34
Fireproof test:API 607/API 6FA
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 4NPS 60 CL150~CL1500
Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc.
Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc.
Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
Float collars and float shoe
The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability.
The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist.
The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
1803 Oil Field Machinery Equipments Suppliers
Short on time? Let Oil Field Machinery Equipments sellers contact you.
