High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics. PROPERTIES Colour : Milky white Solids : 55�±2 % Theoretical Coverage: 10 â??12 m2/Lit DRYING TIME : â?? AT 25�° To handle: 4 â??6 hours To Recoat: 8 - 12 hours Vehicle type: Modified alkyd Specific gravity: 1.10 �±0.02%(depends on color) Viscosity : 95�±15 second in Ford Cup No.4 Flash point: 37�°C
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Acrylic Paints Water Base Paints Wall Paints New Acrylic, Vynil, Waterbase paints, White and colors, Residential and contractors grade, Name of product V600 Interior Acrylic Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : GENERALAcrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended to be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Minimum Order Size : Full Container Loads DENSITY (g/ml) 1.31 +/- 0.035 a 25°C BRIGHTNESS 10 to 20 Glitter Units at 60 ° DRYING TIMETo the touch 30 minutes, at 25 ° C (77 ° F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate. Quality From ISO 9000 paint manufacturer
V300 Interior Acrylic Latex Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : General Acrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended To be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Solids BY Weight (%)41% +/- 5% Viscosity 95 a 105 KU @ 25C Density (g/ml) 1.31 +/- 0.035 a 25C Brightness 0 to 5 Glitter Units at 60 Drying Time To the touch 30 minutes, at 25 C (77 F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate
USA Latex Recycled paint USA Recycled paint exporters Recycled Latex Paints Interior / Exterior flat paint Product origin : North America Minimum Order Size : Full Container Loads
USA Main Brands Paint USA Mistints USA Closeout paints USA Overstock paints Main Brand USA Paint closeouts,mistint paint,overstock paint and closeout paint in North America Name of product : Mistint Random Colors Paint Product origin : North America Minimum Order Size : Full Container Loads
Mistint paint.
Paints, paints in bulk, latex paints, hi gloss enamels, alkyd enamels, semi gloss, silk paints, exterior paints, interior paints, texture paints, primer paints, red oxide paints, paint raw materials, universal stainers, colorants, tintors, emulsions, distempers, binders, alkyds, solvents, resins.
Paint colors.
Abstract art, art paintings.Buying
US$35.00 - US$120.00 Box | 500 Box/Boxes (Min. Order) Payments:This supplier also supports L/C,T/T,Western Union payments Quick Details Place of Origin: GBA-Alderney Usage: Building Coating, Wall Coating State: Emulsion, Emulsion Model Number: Universal Stainer Main Raw Material: Acrylic Application Method: Brush Brand Name: Universal Stainer Packaging & Delivery Port Jebel Ali Lead Time : As per your requirements Features Accurate composition Packing 50ml, 100ml, 110grams Category Universal Stainers.
This is an aqueous, harmless nano-coating. It is silicone. Material: water-based silicone Usage: spray, brush, roller. This product can be used on the surface of concrete, brick, stone, wood, and plasterboard. Type: Nano superhydrophobic coating. Does not change the appearance. Colour: clear. Cover: 10 sqm/kg. If you have any questions please contact me.
Paints.
Paints.
Paints and coating.
