Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor.
PROPERTIES
Colour : Available in pastel and dark shades
Finish : High gloss/Egg Shell
Theoretical Coverage 8 m2/ lit
Curing time: 15 - 20 hours at 25 C
Full cure: 7 days
Flash point 22C (ISO 367 - 83)
Specific gravity: 1.35 when mixed A+B
Pot life: 8 hours at 25�¯
Mixing ratio: 4 parts base A: 1 part hardner B
Solvent: Epoxy thinner.
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Description Two Component, Air-drying, Epoxy Polyamide Cured Finish Paint. Recommended Use :- It Is Recommended As A Top Coat For Structures, Pipelines, Vessels, Equipments And Machineries, Storage Tanks Etc. In Fertilizers And Chemical Plant, Cement Plants, Power Plants, Steel Plants, Pharmaceutical And Petrochemical Complexes, Refineries Etc. Product Is Also Recommended For Application Over Suitable Primer For Oem Industry Like Machine Tools, Pumps, Machineries, Transformers Etc. Physical Data Colour : assorted Shades Finish : glossy / Semi Glossy Solids By Volume : 40 +3% (depends On Shade) Theoretical Spreading Rate : 13.33 Sq.mt / Ltr At Recommended Dft Of 30 au Flash Point : base: Above 23 C Hardener: Above 23 C Drying Characteristics (at 30'c And 65% Relative Humidity) : hard Dry : Overnight Full Cure : 7 Days Shelf Life : base : 6 Months Hardener : 6 Months Surface Preparation This Being A Topcoat, Which Is Applied Over, Primer Or Intermediate Coats, The Surface Should Be Free From Oil, Moisture, Dust And Dirt. Aged Epoxy / Pu Coating Should Be Roughened By Emery Paper Grade 400 / 600 For Better Bonding. Application Data :- Mixing Ratio : base : Hardener (as Per Our Recommendation) Application : by Brush / By Conventional Spray / By Airless Spray Thinner : 190 Pot Life : 4-6hrs Min At 30 C Recommended Dft : 30-40 U Over Coating Interval : min : 8 Hours Max : 24 Hours Compatibility : can Be Over Coated With Pu, Chlorinated Rubber And Synthetic Enamel Paints.
Description Two component, air-drying, Epoxy polyamide cured finish paint. Recommended Use :- It is recommended as a top coat for structures, pipelines, vessels, equipments and machineries, storage tanks etc. in fertilizers and chemical plant, cement plants, power plants, steel plants, pharmaceutical and petrochemical complexes, refineries etc. Product is also recommended for application over suitable primer for OEM industry like machine tools, pumps, machineries, transformers etc. Physical Data COLOUR : Assorted Shades FINISH : Semi glossy SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr at recommended DFT of 30 �µ FLASH POINT : Base: Above 23�° C Hardener: Above 23�° C DRYING CHARACTERISTICS : SURFACE DRY : 90 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : 190 POT LIFE : 4-6hrs min at 30 �° C RECOMMENDED DFT : 30-40 �µ OVER COATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with PU, Chlorinated rubber and synthetic enamel paints.
Overview Specifications CAS No.: Mixture Other Names: EPOXY COAL TAR PITCH FINISH MF: Mixture EINECS No.: Mixture Place of Origin: Hebei, China (Mainland) Main Raw Material: bitumen, Epoxy Usage: Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish, Furniture Paint, Road Marking Paint, Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish Application Method: Brush, Brush State: Liquid Coating Brand Name: JNX Model Number: H52-2 color: black mixing ratio: main agent/curing agent=100/15(weight ratio) solid content: 65% proportion: 1.35 coating ratio: theoretical value:6-7m2/L 70m Packaging & Delivery Packaging Details: 20kg into one metal barrel packaging, 1 ton/pallet,OEM available. Delivery Detail: 20 tons less than a week can be shipped Product Description It is prepared by epoxy resin, coal tar pitch, flake pigment, anti-settling agent and curing agent; it is packaged by two components A and B. Product characteristics It has the advantage of coal tar pitch, i.e. excellent water-proof and aseptic property, as well as the advantages of epoxy resin paint, i.e. good adhesive force, firm paint film, high mechanical strength, good chemical resistance. Lots of flake pigments are added to the finish and after curing, the paint film will form a compact and solid impervious layer. Construction data Non gas spraying, air spray, brush and roller coating Air free spraying Suitable for steel, cement The utility model is suitable for coating of coal tar epoxy primer (twopackage)
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Supplier: Epoxy and polyurethane paint and ancilleries for industrial and automotive usages products are pu primer, epoxy primer, epoxy finish, pu finish matt and glossy solid colours, pu lacquers, pu thinners, epoxy putty
Services: After sales technical services as and when required
Buyer: Pigments, extenders, hydroxy functional acrylic and polyester resins, solvents
Rapid industrial paints Epoxy finishing paints Rapid finishing paints Solvent based epoxy paints Epoxy primer Rapid primer Epoxy shop primer Self leveling epoxy finishing Road marking paint (with chlorine and rubber resin) Synthetic-based anti-rust Ceiling paints Matte plastic paint with silicone Interior paint with silicone and plastic Exterior paint with silicone Silicone based exterior primer Marley pvc adhesive
Supplier: Rapid industrial paints, epoxy finishing paints, rapid finishing paints, solvent based epoxy paints, epoxy primer, rapid primer, epoxy shop primer, self leveling epoxy finishing, road marking paint (with chlorine and rubber resin), synthetic-based anti-rust, ceiling paints, matte plastic paint with silicone, interior paint with silicone and plastic, exterior paint with silicone, silicone based exterior primer, marley PVC adhesive
Supplier: Matt, silk, semi gloss, gloss, emulsions, alkyds, epoxies, wood finishes, varnishes, decorative finishes, paints, coatings, protective coatings
