>=100 Gallons US$ 6.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons US$11.50 Shipping: Support Sea freight Payments:This supplier also supports L/C,T/T,Western Union payments. Place of Origin: United Arab Emirates Usage: Building Coating, Wall Coating State: LIQUID Model Number: High gloss enamel alkyd Main Raw Material: ALKYD Application Method: Brush Brand Name: High gloss enamel alkyd BULK AND RETAIL: ALL COLOR Port Jebel Ali Lead Time : As per your requirements Main Raw Material ALKYD Application Method Brush State LIQUID Packaging & Shipping We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
Place of Origin: United Arab Emirates Usage: Building Coating, Rubber Coating Main Raw Material: bitumen
US$1.00 - US$2.20 / Kilogram | 5 Kilogram/Kilograms (Min. Order) Payments:This supplier also supports L/C payments. Quick Details Place of Origin: GBA-Alderney Usage: Building Coating State: Emulsion Model Number: REGENT GYPSM PUTTY Main Raw Material: GYPSM PUTTY Main Raw Material: GYPSM PUTTY Brand Name: REGENT GYPSM PUTTY Supply Ability Supply Ability: 20000 Ton/Tons per Year Packaging & Delivery Port Jebel Ali Lead Time : As per your Requirement Product DescriptionSpecially designed Gypsum putty for decoration purpose for gypsum board joint, which provides excellent adhesion to the surface, modified water borne acrylic emulsion Description: Mostly using in interior decoration purpose on concrete Gypsum board, walls, woods, plaster etc Properties: Colour: White Finish: Smooth Solids: 70% Specific gravity: 1.65 +/- 0.03 Theoretical Coverage: 2 �¢??3 m2/ltr Drying time : At 25 To handle: �½ hour To Recoat: Over night Number of coats: 1 Precautions: Keep from freezing, contains water. May cause eye , nose, and throat and skin irritation. Keep out of the reach of children Packing: Metal drums one US gallon, 5 US gallons Category: Emulsion. Tags: gypsm putty, putty. Place of Origin: Alderney Main Raw Material: Gypsm putty Packaging & Shipping In 25kg paper bags inner with PE bags Bulk Shipping: We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%.
CONTRACTOR LATEX A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Paints contractor latex is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Paints contractor latex like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet. ROPERTIES Colour : Full range - as per shade card Finish : Matt Solids(Volume) : 52% and above Specific Gravity : 1.40 +/- 0.1 Theoretical Coverage : 250 - 400 sq. ft. per gallon DRYING TIME AT 25 T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic copolymer
STUCCO PUTTY A heavy pigmented and highly thixotropic acrylic wall filler, having excellent adherence to the wall and good durability. PROPERTIES Colour : White Finish : Matt Solids: 70% +/- 2% Specific gravity: 1.7 +/- 0.03 Theoretical Coverage 5-8 m2/ltr depends of surface DRYING TIME â?? AT 25 �° To touch: 1/2 hour To Recoat: 1 hours Number of coats: 1-2
ACRYLIC THINNER IT is a blend of Alcoholâ??s, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor : Characteristic Non - volatile matter : Nil S.g kg/l: 0.850�±0.05 Flash Point (ASTM D93) Not less than 12 �°C Description Review
G P THINNER It is a blend of Alcohol's, Aromatic Solvents and specialty solvents. This thinner is recommended for spray application of oil based Enamels, Primers, Nitrocellulose Paints, Acrylic Paints and Epoxies. This is also recommended for cleaning of equipments & tools. It is strictly not recommended for Polyurethane coatings. PROPERTIES Colour : Crystal Clear Odor: Characteristic Non-volatile matter : NIL S.g kg/l :0.850�±0.05 Flash Point (ASTM D93): Not less than 12 �°C
MICRO TEX Micro tex is a textured coating containing quartz, based on modified Acrylic emulsion, will give a flexible finish with medium textured, PROPERTIES Colour : As per shade card Finish : Light texture finish Consistency: Thixotropic Solids: 50 % +/- 2 % Specific gravity: 1.55 Theoretical Coverage 2.5 â??3.5 m 2/ ltr DRYING TIME : AT 25 �° To handle: 3-4 hours To Recoat: overnight Number of coats: 1 -2 Application by: Roller or brush Description Review It is suitable for exterior and interior surfaces of cement plaster, concrete, bricks, masonry, asbestos cement panels and suitably primed wood. Magnum helps to conceal any small unevenness and indents in the surface. APPLICATIONS: Surface should be clean and dry, before the application of medium Tex. For the fresh concrete Tollens Tex primer should be used as a primer on new surfaces. SURFACE PREPARATION: Surface must be clean and free of, chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence PRECAUTIONS: Keep from freezing, contains water. Using at temperatures above 4ï?°C May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Metal drums one US gallon, 5 US gallons
It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation PROPERTIES CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit. Colour (Saybolt) ASTM D 1209 +30 Initial Boiling Point ASTM D 850 112�° C Copper Corrosion ASTM D 849 None Non â?? Aromatics ASTM D 2360 40 â?? 50% Flash Point (Abel) IP 170 24 �° C PRECAUTIONS: Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications. USES It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use. PROPERTIES Colour, Dry Film : Red Finish, Dry Film : Smooth/Matt Volume Solids, % 51�± 2 Specific Gravity : 1.46�± 0.05 Theoretical Spreading Range : 11-12 M2/L Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat Flash Point : 38 �° C Flexibility : Good Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.) Dry To Recoat/Overcoat : 12 Hours Hard Dry : 24 Hours
Shipping : Support Sea freight Payments:This supplier also supports L/C payments. Quick Details : CAS No.: Acrylic Emulsion EINECS No.: Acrylic Emulsion Main Raw Material: emlusion Application Method: Brush Brand Name: REGENT HIGH GLOSS EMULSION MF: Acrylic Emulsion Place of Origin: GBA-Alderney Usage: used for water-based ink and pverprint varnish production State: Emulsion Model Number: REGENT HIGH GLOSS EMULSION
>=100 Liters US$ 2.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 US$11.50 Payments:This supplier also supports L/C payments. Quick Details Other Names: latex paint Main Raw Material: Acrylic Application Method: Brush Brand Name: Regent Paints Place of Origin: AE-United Arab Emirates Usage: Building Coating, Texture Paint for Exterior and Interior State: Liquid Coating, Liquid Coating Model Number: ASSOCIATED PAINTS INDUSTRY CO. LLC Supply Ability Supply Ability: 20000 Liter/Liters per Day Packaging & Delivery Port : Jebel Ali Lead Time : 1 week This product is designed with respect to deluver utility of economies to the Project with its ability of performance. Best Recommended for interiors. Finish: Matt Solids(volume) 52% Specific gravity: 1.00 +/- 0.1 Theoretical Coverage: 250-400 sq. ft. per gallon State : Liquid Coating Brand Name : Regent Paints Main Raw Material : Acrylic Packaging & Shipping Bulk Shipping: We ship 20 feet containers. It will accommodate 1 US gallon x 4000 CANS 5 US gallon x 950 buckets 1000 liters x 18 Totes Please note- The Above Shipping details is without pallets, with pallets the material will be reduced by 15%
Regent Plastic Emulsion - interior is Latex Acrylic copolymer based Premium Latex - emulsion paint. A specially formulated for interior use. Usually it is applying in concretes, plaster, woods, gypsum boards etc. USES Regent Plastic Emulsion is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create attractive aesthetic Regent Plastic Emulsion like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Regent Plastic Emulsion. PROPERTIES Colour : Full range - as per shade card Finish : Flat Solids(Volume) : 52% and above Specific Gravity : 1.4 +/- 0.1 Theoretical Coverage : 250 - 400 sq. ft. per gallon DRYING TIME : AT 25 T Touch Dry : 2 hours To Recoat : 4 hours Vehicle Type : Acrylic Copolymer
Latex at the best Performance of durability tests in any walls, woods and few metals as well. An adventurous Range to sustain the sheen level and coverage of solvent based products. Adding value to extra coverage, low voc, non yellowing, acrylic features, water dilution and more. A Regent Hi-Performance and durable product. A water - base, acrylic semi-gloss paints for interior surfaces. Excellent for heavy use areas such as walkway walls, doors, trim and kitchen cabinets. USES A semi - gloss finish, acrylic resin emulsion formulated to protect and beautify interior surfaces. Excellent for masonary (concrete, cement block, cinder block), wall board, stone, brick, and wood. May also be used on properly primed steel.
Velvet Acrylic Emulsion is an environmentally friendly acrylic emulsion based interior decorative coating designed for velvet effects and to simulate a prestigious architectural appearance to the surface. It offers excellent adhesion and an easy to clean coating. USES Velvet Acrylic Emulsion is recommended for interior decorations of surfaces like concrete, plaster, gypsum, wooden, design board etc. It can create atractive aesthetic velvet like look to the surfaces. For better colour performance, apply Base coat closer to the shade of Velvet.
FLAT VARNISHES An oxidative drying varnish based on a mixture of alkyds and drying oils. PROPERTIES Colour : Transparent; flat Solids: 42% Theoretical Coverage 6 â?? 7 m2/lit DRYING TIME :â?? AT 25 �° To handle: 4 hours To Recoat: 8 hours Flash point: 38 �° C ( ISO 367 â??83) Specific gravity: 0.90 Solvent: G.P. thinner.max.up to 10% to b added
Industrial Fast drying enamel black. RECOMMENDED USE On metallic surfaces, especially suited for heavy equipments, vehicle etc, especially for defense purpose. PROPERTIES Colour : Special colors available on request. Finish : Smooth and glossy Volume Solid: 35 �± 2 % Viscocity: 200 �± 15 secs in ford cup no. 4. @ 30�ºc S.G. Kg/l: 1.05 Theoritical coverage rate: 10 â?? 12m�²/ ltr Recommended (D.F.T.) Microns 30 Recommended (W.F.T.) Microns 90 Stoving schedule: 120�ºc for 30 minutes
