G P Thinner

It is a mixture of aromatic Hydrocarbon, esters, ketone. It is recommended for Polyurethane varnishes due to its average evaporation PROPERTIES CHARACTERISTICS APPEARANCE COLOR TRANSPARENT LIQUID Specific Gravity ASTM D 3505 0.85 �±.02 Kg. / lit. Colour (Saybolt) ASTM D 1209 +30 Initial Boiling Point ASTM D 850 112�° C Copper Corrosion ASTM D 849 None Non â?? Aromatics ASTM D 2360 40 â?? 50% Flash Point (Abel) IP 170 24 �° C PRECAUTIONS: Contents are Combustible. May cause eye, nose, and throat and skin irritation. Keep out of the reach of children PACKING: Do not use in tank or pit without proper protection Metal drums one lit. 1US gallon, and 5 US gallons

Supplier: Acrylic Water Based Paint 59ml 2oz , Auto, Epoxy, Synthetic Enamel, P. U Paints, Thinner and Primer
Services: Fabrication, Manufacturer
Buyer:

Supplier: Sealants and adhesives, polysulphide sealant (gun grade)/(pouring grade), general purpose rubber sealant, urja food graded duct sealant, nexo seal weatherproof 789 silicone sealant (std. / premium grade), p u sealant, fire stop sealant, water base duct sealant, clean room sealant, non drying pest, clean cloth. (tag rag) microfiber clean cloth, acrylic sealant, under body coating, water base/bitumen base, ms 99 ( metal to metal ), high temperature sealant, low temperature sealant, sol sealer, n.c. thinner, peelable coating, nexo seal multipurpose rtv silicone sealant, heat reflective paint, masking tapes
Services: Manufacturer

Urja Peelable Coating Or Strippable Coating

Urja Bitumen Underbody Coating 1 Ltr

Urja PVC Underbody Coating 1 Ltr

Heat Insulating Paint 25kg Bucket

Supplier: Thinners, wood coatings, P U Paints, industrial paints, epoxy paints

Anti corrosive paint Based on epoxy modified phenolic having good resistance to solvents, water, saline atmosphere, resistance to mild acids, alkali and chemicals. It is suitable for pipelines structures inside chemical factories, under frames of railway coaches, frames of lorries and buses, jetties, marine installations, barrage gates Colour: Selected colours Viscosity: 80 +/- 10 in ford cup b-4 Solids: 45 +/- 2 Coverage: 9-10 sq mts. / ltr/coat Drying time: Surface dry 4-6 hr. Hard dry: 32 -48 hr. Full curing in: 7-8 days Flash point : Above 30 c Recommended dry film thickness: 15 to 20 microns Method of application: Brush/dip/ spray Thinner: P-71 Cross cut adhesion: Passes Bend test 1/2": Passes Resistance to salt spray test: Passes 150 hr. Test Surface preparation mild steel surface: Requires wire brushing or acid pickling followed by phosphating. After surface preparation polyvar-rop - 701 is applied for best results For marine application & chemical atmosphere Polycoat -rop 801 epoxy primer can be used. In 20 lts packing